List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. | Assess structural repair or modification requirements | 1.1 | Structural repair requirements are determined from maintenance manuals or approved repair schemes |
| | 1.2 | Damage beyond repair scheme limits is referred to relevant personnel/authorities |
| | 1.3 | Modification requirements are determined from approved drawings and specifications/ instructions or requirements are referred to relevant personnel/authorities |
| | 1.4 | Completed work is evaluated for compliance with airworthiness requirements |
2. | Perform colour contrast dye penetrant NDT | 2.1 | Inspection requirements are identified from relevant maintenance data or to confirm a visually identified defect |
| | 2.2 | Surfaces to be inspected are prepared for the dye penetrant process |
| | 2.3 | Dye penetrant materials are selected in accordance with standard operating procedures |
| | 2.4 | Penetrant test is performed in accordance with standard operating procedures and while observing all relevant work health and safety (WHS) precautions |
| | 2.5 | Defect indications are checked and identified in accordance with standard operating procedures |
| | 2.6 | Penetrant testing equipment is correctly maintained and stored while observing all relevant WHS requirements, including the use of material safety data sheets (MSDS) and items of personal protective equipment (PPE) |
| | 2.7 | Results are recorded in accordance with standard enterprise and regulatory requirements |
Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria under the specified conditions of assessment, and must include:
interpreting damage limits and identifying applicable repair schemes
interpreting all requirements of modification drawings and assessing work against them
evaluating completed repairs and modifications for compliance with the applicable data and with airworthiness requirements
recognising weld defects
performing colour contrast dye penetrant NDT to confirm defects in applicable aircraft components
application of relevant WHS practices, including the use of MSDS and PPE.
The underlying skills inherent in this unit should be transferable across a range of repair and modification applications related to the structure of aircraft. It is essential that the repair and modification procedures take into account all applicable safety precautions. The ability to interpret repair scheme and modification requirements, including applicable specifications (allowable limits) and ensure that they are applied in practice is critical.
This must be demonstrated through the correct determination of repair requirements and the determination of compliance with repair schemes and modification drawings.
The ability to assess sound weld repairs must also be demonstrated.
Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge at a post-trade level of:
application of regulatory requirements and of manufacturer’s requirements in the determination of structural maintenance needs
assessment of the extent of damage and an understanding of the need for a professional engineer to develop or extend a repair scheme where damage is beyond the limits of maintenance manual repair schemes, including the identification of relevant personnel and authorities
assessment of new equipment or component mounting requirements and an understanding of the need to have drawings and specifications developed by a professional engineer, including the identification of relevant personnel and authorities
the need for shoring and support to maintain aerodynamic shape and for safe performance of structural maintenance
the need for mensuration checks and the techniques used to perform them
how to determine welding requirements and the recognition of sound welds
the correct application of colour contrast dye penetrant NDT and the limitations of the testing method
dye penetrant test procedures:
relevant WHS precautions and how to obtain PPE and MSDS
cleaning and preparation processes and materials
consequences of incorrect preparation
basic concepts and principles of NDT and appropriate use of the colour contrast dye penetrant technique
general properties of penetrants (penetrability, removability and visibility)
types of emulsifiers and developers
established procedures and techniques
defect types and their consequences
post-test cleaning methods
aircraft welding regulations
aircraft welding processes and relevant parent metal groups
defects applicable to each welding process and parent metal group.
Competency will be assessed in the training environment using a combination of practical exercises and scenarios. Applicable work plans should take account of applicable safety (including safe handling of heavy components) and quality requirements in accordance with the industry and regulatory standards.
The following conditions of assessment represent the requirements of CASA and must be rigorously observed.
A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the elements and performance criteria of the unit of competency are being achieved across the tasks and practices listed in the Range of Conditions under supervision without intervention.
This shall be established via simulated activities at the CASR Part 147 Maintenance Training Organisation and performance during observed workplace activities.
The Assessor must meet the criteria specified in the CASR Part 147 Manual of Standards.