• MEM05049B - Perform routine gas tungsten arc welding

Assessor Resource

MEM05049B
Perform routine gas tungsten arc welding

Assessment tool

Version 1.0
Issue Date: March 2024


This unit applies in a maintenance or manufacturing environment where the weld quality is not required to meet an Australian Standard. Fillet and butt welds would typically be performed on low carbon/mild steels and aluminium.

Where welding is required to meet Australian Standard 1554 General Purpose or equivalent codes, occupational health and safety regulations and/or licensing requirements, Unit MEM05019D (Weld using gas tungsten arc welding process) should be selected.

Band: A

Unit Weight: 2

This unit covers preparing the materials and carrying out routine gas tungsten arc welding (GTAW).

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Employability Skills

This unit contains employability skills.




Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

A person who demonstrates competency in this unit must be able to perform routine gas tungsten arc welding (GTAW).

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.

Context of and specific resources for assessment

This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.

This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with carrying out routine gas tungsten arc welding or other units requiring the exercise of the skills and knowledge covered by this unit.

Method of assessment

Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.

Guidance information for assessment


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

Look for evidence that confirms skills in:

preparing materials

setting up welding equipment

welding with GTAW

reading and interpreting routine information on written job instructions, specifications and standard operating procedures

using measurement skills for joint preparation and routine GTAW

Required knowledge

Look for evidence that confirms knowledge of:

preparatory requirements

properties and characteristics of materials and consumables

equipment and equipment settings

fuel gas properties and applications

post welding treatments

weld characteristics

safe welding practices

use and application of personal protective equipment for routine GTAW

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Materials

Mild and low carbon steel

Prepared

Preheating, setting up jigs, fixtures, clamps, joint preparation

Equipment

Hoses, welding leads and gas shrouds, electrodes, gas regulator, liners, contact tips

Consumables

Tungsten electrodes, filler wire, shielding gas

Cleaned

Slag, spatter

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Weld requirements are identified from job instructions. 
The locations of welds are identified in accordance with standard operating procedures and job specifications. 
Materials are cleaned and prepared ready for welding. 
Welding equipment is set up correctly. 
Settings and consumables are selected to suit application. 
Safe welding practices are applied. 
Materials are welded to job requirements. 
Welds are cleaned to standard operating procedures. 

Forms

Assessment Cover Sheet

MEM05049B - Perform routine gas tungsten arc welding
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

MEM05049B - Perform routine gas tungsten arc welding

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: