- MEM07025B - Perform advanced machine/process operation
Assessor Resource
MEM07025B
Perform advanced machine/process operation
Assessment tool
Version 1.0
Issue Date: May 2024
This unit applies to operations where the output of the machine/process can be varied at the discretion of the operator and where recognition/rectification skills are applied based upon product/material/process knowledge to achieve specified outcomes. Deviations and faults of the machine, raw material, process equipment and process are recognised and rectified in accordance with standard operating procedures in order to meet the specification.
Where interpretation of a technical drawing to Australian Standard 1100/1102 or equivalent is required, unit MEM09002B (Interpret technical drawing) should also be selected.
When production packaging and labelling of the finished goods or product is required, then Unit MEM11006B (Perform production packaging) should also be considered.
Where diagnosis and rectification of advanced plastic processes are required, then unit MEM07026B (Perform advanced plastic processing) should be considered.
Where diagnosis and rectification of advanced press operations are required, unit MEM07027B (Perform advanced press operations) should be considered.
Band: A
Unit Weight: 6
This unit covers performing advanced operation and monitoring of a machine or process and recognising and rectifying deviations and faults in the product/output, raw material or feed stock, tooling and machine/process.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Prerequisites
Path 1
MEM07001B
Perform operational maintenance of machines/equipment
MEM07024B
Operate and monitor machine/process
MEM09002B
Interpret technical drawing
MEM12023A
Perform engineering measurements
MEM16006A
Organise and communicate information
MEM18001C
Use hand tools
Employability Skills
This unit contains employability skills.
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | A person who demonstrates competency in this unit must be able to conduct the pre-start checks, operate and monitor the machine or process and recognise and rectify deviations and faults in the product/output, raw material or feed stock, tooling and machine/process. Competency in this unit cannot be claimed until all prerequisites have been satisfied. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts. |
Context of and specific resources for assessment | This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate. This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with advanced machine/process operation or other units requiring the exercise of the skills and knowledge covered by this unit. |
Method of assessment | Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials. |
Guidance information for assessment | |
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Required skills |
Look for evidence that confirms skills in: reading and interpreting routine information on written job instructions, specifications, standard operating procedures and other standard workplace documents. May include drawings undertaking manual handling following job/process instructions determining required adjustments to process following oral instruction entering routine and familiar information onto proforma and standard workplace forms checking and clarifying task-related information orally reporting routine information identifying and rectifying faults/deviations in raw material, product, process and equipment |
Required knowledge |
Look for evidence that confirms knowledge of: job requirements documentation requirements pre-start checks machine/process start-up and unloading procedures reasons and procedures for programmed operational maintenance component/feed stock levels to ensure continuous process production recording and reporting requirements types of raw material, product, process and equipment fault/deviations and corrective actions procedures to be followed in emergency situations consequences of improper handling and storing of finished work use and application of personal protective equipment safe work practices and procedures hazards and control measures associated with advanced machine/process operation |
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Machine/process | Machines/processes used in pressing, punching, plastic moulding, extruding, bending, joining, rolling, forming, drawing, metal removal, pickling, cylinder filling, printing, painting etc. |
Faults/deviations | Deviations and faults of the machine, raw material, process equipment and process |
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
| Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice | Yes | No | Comments/feedback |
|---|---|---|---|
| Drawings, job instructions and specifications are interpreted and task requirements are understood including machine/process selection and settings. | |||
| Safety equipment and guards are checked for correct position and operation. | |||
| Programmed operational maintenance is undertaken to standard operating procedures. | |||
| Pre-start checks are undertaken to standard operating procedures. | |||
| Equipment, raw material and tooling are verified to match task requirement. | |||
| Machine/process is started up safely and correctly. | |||
| Machine/process is operated in accordance with job instructions or standard operating procedures. | |||
| Components/feed stock is loaded and maintained consistent with production requirements. | |||
| Machine/process output is unloaded safely to standard operating procedure as required. | |||
| Machine/process output is handled and stored in a manner not likely to cause damage as required. | |||
| Production data is recorded to standard operating procedures. | |||
| Machine/process is monitored for safe and correct operation. | |||
| Emergency procedures are understood and followed in accordance with standard operating procedures. | |||
| Product faults/deviations are recognised from standard operating procedures, job sheets or other documentation. | |||
| Product faults/deviations are rectified in accordance with standard operating procedures, job sheets or other documentation and may be achieved by adjustment of machine/process settings within parameters. | |||
| Raw material faults/deviations are recognised from standard operating procedures, job sheets or other documentation. | |||
| Raw material faults/deviations are rectified in accordance with standard operating procedures, job sheets or other documentation. | |||
| Process equipment faults/deviations are identified against specifications and reported to standard operating procedure. | |||
| Process equipment faults/deviations are rectified in accordance with standard operating procedures, job sheets or other documentation. | |||
| Machine/process faults/deviations are recognised from standard operating procedures, job sheets or other documentation. | |||
| Machine/process faults/deviations are rectified in accordance with standard operating procedures, job sheets or other documentation. |
Forms
Assessment Cover Sheet
MEM07025B - Perform advanced machine/process operation
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
MEM07025B - Perform advanced machine/process operation
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent
Assessor name:
Signature:
Date:
Student signature:
Date: