• MEM11001C - Erect/dismantle scaffolding and equipment

Assessor Resource

MEM11001C
Erect/dismantle scaffolding and equipment

Assessment tool

Version 1.0
Issue Date: March 2024


This unit applies to erecting scaffolding for maintenance and installation in a workshop and in factories, manufacturing plants and warehouses. It includes preparation, erection and dismantling of the scaffolding/equipment.

An awareness of licensing and permit requirements is required.

Band: A

Unit Weight: 4

This unit covers erecting and dismantling scaffolding and equipment.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Prerequisites

Path 1

MEM18001C

Use hand tools


Employability Skills

This unit contains employability skills.




Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

A person who demonstrates competency in this unit must be able to erect and dismantle scaffolding/equipment safely subject to legislative requirements. Competency in this unit cannot be claimed until all prerequisites have been satisfied.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.

Context of and specific resources for assessment

This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.

This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with erection and dismantling of scaffolding or other units requiring the exercise of the skills and knowledge covered by this unit.

Method of assessment

Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning should not require language, literacy and numeracy skills beyond those required in this unit. The candidate must have access to all tools, equipment, materials and documentation required and must be permitted to refer to any relevant workplace procedures, codes, specifications, standards, manuals and reference materials.

Guidance information for assessment


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

Look for evidence that confirms skills in:

reading and interpreting routine information on written job instructions, specifications and standard procedures. May include drawings for erecting scaffolding

undertaking basic levelling and alignment

interpreting instructions and legislative requirements

using relevant hand tools and manual handling techniques

assessing risk

following oral instructions

working safely and confidently at heights

Required knowledge

Look for evidence that confirms knowledge of:

erection and dismantling procedures as set out in relevant Australian standards

codes of practice, for example the Scaffolder's Guide, relevant acts and regulations

site specific requirements

safety procedures, safe work practices and procedures

use and application of personal protective equipment

hazards and control measures associated with erecting/dismantling scaffolding and equipment, including housekeeping

scaffolding techniques and equipment

limitations of equipment

materials handling, storage and environmentally friendly waste management

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Scaffolding/equipment

Prefabricated tower scaffolds, fall protection devices, catch platforms and bracket scaffolds (tank and formwork), mobile scaffolds, gin wheels, cantilevered hoist with a load limit not exceeding 500 kilograms (material only), safety nets and static lines

The major difference between basic and complex scaffolding is the height of the working platform and certain types of scaffolding and configurations

Hazards

Chemicals, dangerous or hazardous substances/materials

Movement of equipment, goods, materials, vehicular traffic

Uneven/unstable terrain, overhead service lines, trees, underground services, obstructions, structures, surrounding buildings, facilities, bridges/walkways, lifting equipment

Prescribed procedures

Clarification of instructions and/or plans either written or from authorised personnel

Site safety policy and procedures

Standard operating procedures

Correct use of equipment

Industry standards and requirements

Manufacturers' specifications

Signage and barriers and third party protection measures

Physical barriers (parawebbing, bollards, timber or metal barriers)

Warning/direction signs

Personnel to restrict unauthorised access (spotters)

Permits to work

Safe work practices

Hazard identification, risk assessment, risk reduction measures, house keeping and personal protective equipment

State and Territory legislative requirements

Appropriate OHS and Scaffolding acts and regulations

Australian standards, codes of practice and NOHSC:1006

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Site plans, scaffolding/equipment designs and drawings to industry practices are interpreted as necessary. 
Work area is inspected to identify hazards and appropriate prevention/control measures are implemented to avoid hazard. 
All work is undertaken safely and to prescribed procedures. 
Erection site is prepared to meet job requirements. 
Necessary signage and barriers and third party protection measures are placed in appropriate position. 
Appropriate scaffolding/equipment components are selected and inspected and damaged components are labelled and rejected. 
Rejected components are repaired or sent for repair. 
Scaffolding/equipment is erected to plan and in accordance with safe work practices, Australian standards, State and Territory legislative requirements and equipment manufacturers' requirements. 
The completed scaffolding/equipment is checked for safety and operational requirements. 
Site is left clear of all surplus components, equipment, tools and debris. 
The scaffolding/equipment is inspected for damage, corrosion and wear. 
Any alteration or repair is carried out in accordance with safe work practices and legislative requirements. 
Any inspection log is completed as required. 
Work is undertaken safely and to prescribed procedure. 
Scaffolding/equipment is inspected for damage, corrosion or wear and is noted for consideration in planning for dismantling. 
Scaffolding/equipment is dismantled in accordance with site procedures, State and Territory legislative requirements and critical structural and safety requirements. 
Site is cleaned and cleared of all tools, excess material and debris and left in a safe state. 

Forms

Assessment Cover Sheet

MEM11001C - Erect/dismantle scaffolding and equipment
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

MEM11001C - Erect/dismantle scaffolding and equipment

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: