Assessor Resource

MSATCS504A
Detail ancillary steelwork

Assessment tool

Version 1.0
Issue Date: May 2024


This unit applies to a structural steel detailer who has to detail ancillary structural steelwork including steelwork used in stairways, ladders, landings, platforms for personnel and machinery, and other ancillary steel structures such as cages, lift guide rails and crane rails. The unit can also apply to the detailing of stand alone steel constructions that are not part of or attached to plant or buildings, and which do not require additional specialist knowledge. Examples include:

steel tankage rolled plates

chimney flumes

exhaust pipe flumes

pipe supports

conveyor structures.

The unit assumes that knowledge of basic technical drawing conventions and procedures such as view, dimensioning, drawing layout, and so on is already held.

Work is conducted according to defined procedures.

The detailing covered by this unit may be done manually or by using CAD and/or proprietary steel detailing software.

Work may be conducted in small to large scale enterprises and may involve individual and team activities.

This unit requires the application of skills associated with planning and organising to complete structural steel detail drawings. Communication and numeracy skills are used to refer to patterns and specifications and complete and label sketches. Self management skills are used to ensure conformance of own work to quality standards.

This unit covers the skills and knowledge required to detail steelwork ancillary to, or separate from, the main structural elements and their connections in a steel framed building or industrial construction.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Prerequisites

MEM09002B

Interpret technical drawing

MSATCS301A

Interpret architectural and engineering design specifications for structural steel detailing

Employability Skills

This unit contains employability skills.



Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Demonstrates skills and knowledge to:

identify and interpret architect and engineer design specifications for structural steel components of ancillary steelwork including members and connections

relate design information to structural steel detailing processes

establish efficient administrative arrangements for liaison with designers

establish drawing and document control procedures

identify standard sizes and specifications of structural members and components from industry publications, manufacturers' catalogues and Australian or other relevant standards

Context of and specific resources for assessment

Assessment may occur on the job or in an appropriately simulated environment

Resource implications for this unit include:

access to real or appropriately simulated detailing of ancillary structural steelwork including provision of suitable design information

computer with suitable CAD software or manual drafting equipment and material including work areas, materials and equipment

access to steel and component manufacturers catalogues or web sites

access to relevant standards through either hard copy or internet access.

Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate ethnicity, age, gender, demographics and disability.

Access must be provided to appropriate learning and/or assessment support when required. Where applicable, physical resources should include equipment modified for people with disabilities.

Method of assessment

Assessment must satisfy the endorsed assessment guidelines of the Manufacturing Training Package

Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of underpinning knowledge

Assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure its correct interpretation and application

Assessment may be applied under project related conditions (real or simulated) and require evidence of process

Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances

Assessment may be in conjunction with assessment of other units of competency where structural steel detailing is involved

Guidance information for assessment

Assessment processes and techniques must be culturally appropriate and appropriate to the oracy, language and literacy capacity of the assessee and the work being performed.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

assess design information for adequacy of information needed for structural steel detailing

liaise with architects and engineers

assess scope of structural steel detailing tasks and priorities

interpret design drawings, sketches and schedules

produce shop detail drawings and erection drawings

research and obtain relevant Australian Standards, codes and regulations

work according to OHS practices of the enterprise and workplace which may include requirements prescribed by legislation, awards, agreements and conditions of employment, standard operating procedures, or oral, written or visual instructions

communicate at all levels about technical issues related to patterns and specifications

reading and numeracy is required to the level of interpreting workplace documents and technical information

Required knowledge

architectural and engineering design drawings including standard symbols, terms, abbreviations and sketches

structural members used in steel constructions

the difference between design and detail drawing processes

drawing office procedures

fabrication processes and procedures

the Australian steel structures limit state design code's (AS4100) requirements in so far as they impact on steel detailing

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Legislative/regulatory requirements

All work must comply with relevant Federal and State or Territory legislative or regulatory requirements

Design information

Design information is the information provided to the detailer and fabricator by the architects and consulting engineers for a project. For some projects the design information may only be provided by an engineer. The design information will usually be in the form of design drawings or sketches but may also be via material lists, written instructions and computer files

Other ancillary steel structures

Other ancillary structures as defined in this unit are steel constructions that are not part of the structural framework or exterior of a building or part of the structural support for plant and which could be part of a steel construction detailing contract. Examples include:

crane rails and connections

lift guide rails

cages

steel tankage rolled plates

chimney flumes

exhaust pipe flumes

pipe supports

conveyor structures

Direction marks

Direction marks are indicated on the shop drawings and on the beam or girder by the words 'North' or 'West' as applicable. Industry standard practice is to determine the placement of these marks by viewing and numbering the beams and girders from the bottom or right hand edge of the floor plan. Variations from this practice may occur on specific projects and should be noted on the erection plan.

Work environment

Detailing may be undertaken in a variety of work environments including commercial, home office or fabrication or construction enterprise.

Work may be performed individually on a contracting/project basis or as part of a project team and in response to combinations of paper based and electronic instructions.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Scheduling of detail drawings for stairways, platforms, ladders and landings are discussed with fabricator 
Design information is checked and any requests for further information (RFIs) are made 
Large scale set-out or 3D model of stairway is prepared and setting out points established 
Stairway is dimensioned and detailed consistent with design information and the Building Code of Australia and AS 1657 
Holding down bolt layout and base plate details are prepared for ground floor supports or plinths 
Design information is received from client and fabrication schedule and requirements including allocation of components for shop and site fabrication confirmed 
Size limitations of any sections requiring corrosion treatment or other surface finishing processes are determined 
Transport limitations, erection procedures and limitations, and any relevant codes and regulations are determined 
Rough large scale layout and 3D model is combined with trial assembly if required 
Design information is used to directly insert or calculate and insert all dimensions, clearances, bolt layouts, weld types and dimensions, direction marks and surface finishes on shop drawings and erection diagrams 
Detail drawings are sent for approval by designer 

Forms

Assessment Cover Sheet

MSATCS504A - Detail ancillary steelwork
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MSATCS504A - Detail ancillary steelwork

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: