List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Plan for production | 1.1 | Applicable work health and safety (WHS), legislative and organisational requirements relevant to constructing prototypes and samples are verified and complied with |
1.2 | Design brief is reviewed, confirmed and clarified with appropriate personnel |
1.3 | Type and quantity of material to be used is acquired from the storage location |
1.4 | Equipment is selected appropriate to work requirements and checked for operational effectiveness in accordance with manufacturer recommendation |
1.5 | Communication with others is established and maintained in accordance with WHS requirements |
2 | Plan for production | 2.1 | Manufacturing process is planned and organised |
2.2 | Material is allocated in accordance with the manufacturing plan and safe working procedures |
2.3 | Components are selected |
2.4 | Assembly methods are researched and planned |
2.5 | Components are assembled in accordance with the sketches and freehand development drawings |
2.6 | Prototype or sample is finished according to draft specifications |
3 | Evaluate prototype or sample | 3.1 | Prototype or sample is evaluated for functionality and aesthetic appeal |
3.2 | Prototype or sample is assessed for their elements of design |
3.3 | Prototype or sample is assessed for their principles of design |
3.4 | Prototype or sample is analysed against design brief requirements |
3.5 | Prototype or sample is reviewed with client or test client |
3.6 | Modifications to the prototype or sample are explored to satisfy the requirements of the design brief |
3.7 | Prototype or sample production process faults are recorded and reported to the appropriate personnel |
Collect, organise and understand information related to furnishing work instructions and work orders and safety procedures
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Identify materials used in the work process
Follow work instructions, operating procedures and inspection processes to:
minimise the risk of injury to self or others
prevent damage to goods, equipment and products
maintain required production output and product quality
Construct a prototype or sample in accordance with the design brief and concept sketches and drawings
Apply design elements and principles to develop a prototype in accordance with a the design brief
Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements
Lead others and work effectively to improve production quality and outcomes
Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures
Use workplace technology related to the coordination, including communication equipment, time and management aids and other measuring devices
Minimise wastage of resources, including materials, time and money
Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity and encourage participation of employees in the planning of work activities and changes
State or territory WHS legislation, regulations, standards and codes of practice relevant to the full range of processes for the construction of prototypes and samples
Organisational and site standards, requirements, policies and procedures for constructing prototypes and samples
Environmental protection requirements
Established communication channels and protocols
Relevant problem identification and resolution
Elements and principles of design
Ergonomics and aesthetic values
Types of tools and equipment and procedures for their safe use, operation and maintenance
Characteristics of materials, products and defects
Set-up and operation of equipment
Design and other relevant computer programs
Product assembly techniques
Sketching and drawing
Storage systems and labelling
Procedures for the recording, reporting and maintenance of workplace records and information
Appropriate mathematical procedures for estimation and measurement
Assessors must:
hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors
have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification
be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.
Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.
Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, multimedia evidence, supervisor’s reports, projects and work samples.
Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.
Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.
Access is required to materials, equipment and specifications relevant to constructing a prototype or sample.