List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Prepare for work | 1.1 | Characteristics of the surface and the required surface coating are identified from work orders or instructions |
1.2 | Processing and application techniques, time and safety requirements are identified and used for work planning |
1.3 | Work health and safety (WHS) requirements, including ventilation requirements and personal protection needs, are observed throughout the work |
1.4 | Tools, equipment and accessories are identified and checked for safe and effective operation for the surface coating task |
1.5 | Coating materials are identified and prepared |
2 | Check and prepare for spraying | 2.1 | Products with surface or other faults are identified and faults reported or repaired as appropriate |
2.2 | Other products and equipment in the workplace are protected from overspray |
2.3 | Trial applications of surface materials are made to check equipment operation, materials consistency and specified surface finish |
2.4 | Machine faults are identified and rectified or reported |
2.5 | Material faults are identified and workplace procedures for rectification are followed |
3 | Apply surface coating | 3.1 | Surfaces are kept free of contamination |
3.2 | Surface coatings are applied according to workplace procedures |
3.3 | Surface coating viscosity and coverage is monitored and checked against workplace requirements for even spread and thickness |
3.4 | Rectification of surface faults are made as required |
3.5 | Products are inspected and approved for suitability for further processing |
3.6 | Defects are dealt with and/or reported in accordance with workplace procedures |
4 | Clean work area and maintain equipment | 4.1 | Equipment is cleaned and inspected for serviceable condition and stored appropriately |
4.2 | Unserviceable equipment is tagged, faults are identified and appropriate personnel are informed |
4.3 | Work area, including spray booth is cleaned and returned to approved condition |
4.4 | Workplace records are completed |
Interpret work order and locate and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Identify materials used in the work process
Follow work instructions, operating procedures and inspection processes to:
minimise the risk of injury to self or others
prevent damage to goods, equipment and products
maintain required production output and product quality
Select and apply surface coatings, including the adjustment of system controls, to effect required coating using a minimum of two (2) different CNC systems for curtain coating, UV coating, tumbling, dipping, and electrostatic powder coating tasks
Maintain equipment and work area, including spray booth
Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements
Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures
Minimise wastage of resources, including materials, time and money
Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity
Identification of CNC coating system equipment, processes and procedures
Characteristics of coatings and base materials in terms of toxicity, reactivity, flammability, required viscosity and recoatability
Effects of fumes, heat and other radiations on surface coatings
Methods to prevent contamination of surfaces during and after surface coating
Work flow in relation to spraying operations
Assessors must:
hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors
have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification
be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.
Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.
Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, multimedia evidence, supervisor’s reports, projects and work samples.
Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.
Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.
Access is required to CNC coating systems and equipment, spray booth, coatings and cleaning products.