List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Prepare for work | 1.1 | Applicable work health and safety (WHS), legislative and organisational requirements relevant to the installation of expansion joints to timber and engineered flooring are verified and complied with |
1.2 | Instructions and/or plans are read and interpreted to identify process required to complete work tasks |
1.3 | Timber and engineered flooring is assessed for the type, number and installation requirements of expansion joints consistent with Australian Standards, industry standards and manufacturer recommendations |
1.4 | Suitable expansion joints, cover strips, fixings and adhesives are selected as required |
1.5 | Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition |
1.6 | Sequence of work is planned, including the position of each expansion joint, to ensure efficiency and quality of installation |
2 | Set out expansion joints for installation | 2.1 | Expansion joints are positioned according to the requirements of the flooring type, manufacturer specifications and Australian Standards |
2.2 | Timber or metal mouldings or cork expansion strip for fixing are organised and used in accordance with relevant safety management requirements |
2.3 | Adhesives and fixings, are prepared for use as required |
2.4 | Working lines and starting point are established |
3 | Prepare expansion joints | 3.1 | Instructions and sequence for cutting and fixing are followed |
3.2 | Timber or metal mouldings are laid out to meet directional sequence, pattern match, specification requirements and to minimise waste and joins, as appropriate |
3.3 | The aesthetics of the materials are maximised, where appropriate, matching grains and colours |
3.4 | Timber or metal moulding or cork expansion strip materials are accurately and clearly marked for cutting |
3.5 | Timber or metal moulding or cork expansion strip is cut to length and size for final fixing ensuring minimum waste |
4 | Install expansion joints | 4.1 | Timber or metal mouldings or cork expansion strip for fixing are organised and used in accordance with relevant safety management requirements |
4.2 | Adhesives and mechanical fixings are prepared for use as required |
4.3 | Fixing methods and equipment are used following manufacturer recommendations |
4.4 | Timber or metal mouldings or cork expansion strip are fitted to perimeter wall expansion gaps, expansion joints in the body of the flooring or transitions of the timber or engineered flooring |
4.5 | Finished job is inspected and any imperfections are rectified following workplace procedures |
5 | Complete housekeeping | 5.1 | Unused materials are stored or recycled as required |
5.2 | Tools and equipment are cleaned and stored appropriately |
5.3 | Work area is cleaned and rubbish disposed of appropriately |
5.4 | Workplace documentation is completed |
Interpret work order and locate and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Identify materials used in the work process
Follow work instructions, operating procedures and inspection processes to:
minimise the risk of injury to self or others
prevent damage to goods, equipment and products
maintain required production output and product quality
Complete a minimum of the placement and fitting of expansion joints to:
one (1) strip timber floor
one (1) parquetry floor
one (1) engineered floating floor
Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements
Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures
Avoid backtracking, work flow interruptions or wastage
Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity
State or territory WHS legislation, regulations, standards and codes of practice relevant to placement and fitting of expansion joints to timber and engineered flooring
Organisational and site standards, requirements, policies and procedures for the placement and fitting of expansion joints to timber and engineered flooring
Types, characteristics, uses and limitations of:
the placement and fitting of expansion joints for timber and engineered flooring
timber or metal mouldings and cork expansion strip when fitting expansion joints to timber and engineered flooring
Types and uses of tools and equipment used during the placement and fitting of expansion joints to timber and engineered flooring.
Basic wood working techniques relevant to the placement and fitting of expansion joints to timber and engineered flooring
Workplace safety system requirements relevant to the placement and fitting of expansion joints to timber and engineered flooring
Work flow in relation to the placement and fitting of expansion joints to timber and engineered flooring
Characteristics and requirements of expansion joint preparation
Environmental protection requirements
Appropriate mathematical procedures for estimation and measurement
Procedures for the recording, reporting and maintenance of workplace records and information
Assessors must:
hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors
have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification
be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.
Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.
Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, multimedia evidence, supervisor’s reports, projects and work samples.
Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.
Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.
Access is required to materials and equipment for the placement and fitting of expansion joints to one strip timber floor, one parquetry floor and one engineered floating floor.