List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Prepare for installation | 1.1 | Applicable work health and safety (WHS), legislative and organisational requirements relevant to install adhesive fixed carpet floor coverings are verified and complied with |
1.2 | Floor inspection report is consulted to confirm suitability of floor for carpet installation |
1.3 | Instructions and/or plans/sketches are read and interpreted to identify the process required to complete work tasks |
1.4 | Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition |
1.5 | Suitable perimeter finishing, joining materials, metal mouldings, cover and PVC strips are selected and prepared |
1.6 | Sequence of work is planned, including the starting point, to ensure efficiency and quality of installation |
1.7 | Suitable primers and adhesives are selected and prepared for the installation |
2 | Set out materials | 2.1 | Carpet to be installed is checked against order |
2.2 | Adhesive fixed carpet floor coverings are acclimatised according to manufacturer recommendations |
2.3 | Underlay and carpet to be installed is checked against work instruction and appropriate standards |
2.4 | Appropriate primers are applied to the sub-floors |
3 | Lay carpet flooring | 3.1 | Instructions and sequence for laying and fixing are followed |
3.2 | Underlay is cut and installed to specification |
3.3 | Carpet pieces are laid out and checked for size, direction of pile and pattern |
3.4 | Carpet is trimmed to shape as necessary, joins are cut and sealed following manufacturer instructions and Australian Standards |
3.5 | Adhesives are applied following manufacturer instructions |
3.6 | Carpet is installed following manufacturer instructions and Australian Standards |
3.7 | Cover and finishing strips are appropriately fixed for the type of sub-floor |
3.8 | Protective coverings are installed as specified |
3.9 | Finished work is inspected for compliance with work order, workplace and Australian Standards of finish |
4 | Complete housekeeping | 4.1 | Unused materials are stored or recycled as required |
4.2 | Tools and equipment are cleaned and stored appropriately |
4.3 | Work area is cleaned and rubbish disposed of appropriately |
4.4 | Workplace documentation is completed |
Interpret work order and locate and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Identify materials used in the work process
Follow work instructions, operating procedures and inspection processes to:
minimise the risk of injury to self or others
prevent damage to goods, equipment and products
maintain required production output and product quality
Complete a minimum of the following:
one (1) direct stick carpet installation using a PVC-backed carpet to connecting rooms, including at least one (1) cross join and one (1) seam join
one (1) dual-bond carpet installation using a woven carpet to connecting rooms, including at least one (1) cross join and one (1) seam join
one (1) dual-bond carpet installation using tufted carpet and pre-applied adhesive underlay to connection rooms, including at least one (1) cross join and one (1) seam join using gripper strips and heat bond tape
Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements
Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures
Avoid backtracking, work flow interruptions or wastage
Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity
State or territory WHS legislation, regulations, standards and codes of practice relevant to adhesive fixed carpet and underlays carpet systems
Organisational and site standards, requirements, policies and procedures for adhesive fixed carpet and underlay carpet system
Environmental protection requirements
Established communication channels and protocols
Relevant problem identification and resolution
Types of tools and equipment and procedures for their safe use, operation and maintenance
Characteristics of materials, products and defects
Set-up and operation of equipment
Products assembly techniques
Procedures for the recording, reporting and maintenance of workplace records and information
Appropriate mathematical procedures for estimation and measurement
Types, characteristics, uses and limitations of:
adhesive fixed carpets and underlays
installation adhesives
Types and uses of adhesive fixed carpet installation tools and equipment
Workplace safety system requirements, including ventilation needs, related to the installation of adhesive fixed carpets
Characteristics and requirements of sub-floor preparation
Work flow in relation to the cutting, laying, fixing, joining and finishing of adhesive fixed carpet
Assessors must:
hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors
have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification
be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.
Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.
Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, multimedia evidence, supervisor’s reports, projects and work samples.
Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.
Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.
Access is required to materials, equipment and specifications relevant to lay adhesive fixed carpet floor coverings.