List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Prepare for work | 1.1 | Applicable work health and safety (WHS), legislative and organisational requirements relevant to the repairing timber flooring are verified and complied with |
1.2 | Instructions and/or plans are read and interpreted to identify process required to complete work tasks |
1.3 | Work instructions or customer feedback are used to identify required work |
1.4 | Damaged floor is inspected to determine probable causes of damage or faults and assist in the repair planning process |
1.5 | Damage assessment and work plan are used to select required materials |
1.6 | Timber materials are matched to existing materials |
1.7 | Quantities of replacement flooring and materials required are confirmed from the work plan |
1.8 | Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition |
1.9 | Sequence of work is planned, including the starting point, to ensure efficiency and quality of installation |
2 | Set out materials | 2.1 | Timber flooring to be installed is checked against work order |
2.2 | Timber flooring to be installed is acclimatised according to manufacturer recommendations |
2.3 | Area to be repaired is measured and starting points are marked |
2.4 | Damaged sections of floor are removed and/or prepared for repair following workplace procedures |
2.5 | Suitable adhesives/fasteners, fillers and/or stains are selected following workplace procedures or work instructions |
3 | Repair flooring | 3.1 | Replacement flooring materials are cut to provide appropriate alignment of joins |
3.2 | Adhesives/fasteners are used following workplace procedures |
3.3 | Replacement flooring materials are installed to produce required finish |
3.4 | Damaged areas are filled and/or re-stained to complete repair following workplace procedures |
4 | Complete housekeeping | 4.1 | Unused materials are stored or recycled as required |
4.2 | Tools and equipment are cleaned and stored appropriately |
4.3 | Work area is cleaned and rubbish disposed of appropriately |
4.4 | Workplace documentation is completed |
Interpret work order and locate and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Identify materials used in the work process
Follow work instructions, operating procedures and inspection processes to:
minimise the risk of injury to self or others
prevent damage to goods, equipment and products
maintain required production output and product quality
Complete a minimum of two (2) types of repair involving removing and replacing:
strip timber flooring
parquetry flooring, and/or
floating flooring
Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements
Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures
Avoid backtracking, work flow interruptions or wastage
Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity
State or territory WHS legislation, regulations, standards and codes of practice relevant to repairing timber flooring
Organisational and site standards, requirements, policies and procedures for the repairing of timber flooring
Environmental protection requirements
Types, characteristics, uses and limitations of timber floors
Types and uses of tools and equipment used during the repairing of timber flooring
Workplace safety system requirements relevant to the repairing of timber flooring
Work flow in relation to the repairing of timber flooring
Causes of imperfections and damage to timber flooring
Characteristics of timber and concrete sub-floors
Requirements of sub-floor ventilation
Techniques and requirements for conducting moisture testing
Workplace system requirements relating to inspecting and repairing timber flooring materials
Appropriate mathematical procedures for estimation and measurement
Procedures for the recording, reporting and maintenance of workplace records and information
Assessors must:
hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors
have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification
be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.
Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.
Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, multimedia evidence, supervisor’s reports, projects and work samples.
Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.
Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.
Access is required to a realistic sprung timber floor installation requirement, materials, equipment and specifications relevant to repairing timber floors.