List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Prepare for the work | 1.1 | Applicable work health and safety (WHS), legislative and organisational requirements relevant to coarse, finish and fine sanding and filling parquetry flooring are verified and complied with |
1.2 | Instructions and/or plans are read and interpreted to identify process required to complete work tasks |
1.3 | Parquetry flooring is inspected for contamination, moisture content and suitability for coarse, finish and fine sanding operations and any pre-sanding tasks are completed |
1.4 | Parquetry flooring condition is assessed and the extent of coarse, finish and fine sanding and filling required to meet job specifications is confirmed |
1.5 | Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition |
1.6 | The job site is isolated and/or encapsulated to contain dust fallout from sanding operation |
1.7 | Sequence of work is planned, including the starting point, to ensure efficiency and quality of installation |
2 | Conduct coarse sandingoperations | 2.1 | Sanding equipment is set up in accordance with manufacturer instructions and operating procedures |
2.2 | Emergency stops, gauges, guards and controls are identified and checked |
2.3 | Equipment settings and adjustments are made and checked |
2.4 | Sanding belts or papers are selected |
2.5 | Trial runs are conducted to check machine operations and quality of finished work |
2.6 | Sanding belts or papers are attached, routinely checked and changed as required |
2.7 | Coarse sanding is completed systematically and effectively with the grain, against the grain and across the grain within the minimum required timeframe |
2.8 | Routine lubrication and adjustments to the equipment are completed as required |
2.9 | Coarse sanded parquetry flooring is cleaned, inspected and any imperfections are rectified following workplace procedures |
3 | Conduct edge sanding operations | 3.1 | Edge sanding equipment is set up in accordance with manufacturer instructions and operating procedures |
3.2 | Emergency stops, gauges, guards and controls are identified and checked |
3.3 | Equipment settings and adjustments are made and checked |
3.4 | Sanding papers are selected |
3.5 | Trial runs are conducted to check machine operations and quality of finished work |
3.6 | Sanding papers are attached, routinely checked and changed as required |
3.7 | Edge sanding is completed systematically and effectively within the minimum required timeframe |
3.8 | Routine lubrication and adjustments to the equipment are completed as required |
3.9 | Edge sanded parquetry flooring is cleaned, inspected and any imperfections are rectified following workplace procedures |
4 | Conduct filling operations | 4.1 | Surface to be filled is inspected and assessed as being ready for filling with the selected filler |
4.2 | Work sequence is planned to ensure efficiency and quality of application |
4.3 | Ventilation is checked before chemical fumes are released, and all WHS requirements are met, including use of personal protective equipment |
4.4 | Environmental protection regulations are complied with |
4.5 | Filling material is prepared in accordance with manufacturer specifications |
4.6 | Trial applications of fillers are made to check equipment operation, materials consistency, viscosity and specified colour |
4.7 | Faults and or inconsistencies in colour are identified and workplace procedures for rectification and adjustment are followed |
4.8 | Filling material is applied in accordance with manufacturer recommendations |
4.9 | Recommended drying times are observed before fine sanding |
4.10 | Sanding between coats, where required, is carried out according to manufacturer recommendations |
4.11 | Finished floors are inspected and approved for suitability for further processing |
4.12 | Final finish meets the requirements of the job |
5 | Conduct fine sanding operations | 5.1 | Fine sanding equipment is set up in accordance with manufacturer instructions and operating procedures |
5.2 | Emergency stops, gauges, guards and controls are identified and checked |
5.3 | Equipment settings and adjustments are made and checked |
5.4 | Sanding papers are selected |
5.5 | Trial runs are conducted to check machine operations and quality of finished work |
5.6 | Sanding papers are attached, routinely checked and changed as required |
5.7 | Fine sanding of the body and perimeter of the floor is completed systematically and effectively within the minimum required timeframe |
5.8 | Fine sanded parquetry flooring is cleaned, inspected and any imperfections are rectified following workplace procedures |
6 | Complete housekeeping | 6.1 | Unused materials are stored or recycled as required |
6.2 | Tools and equipment are cleaned and stored appropriately |
6.3 | Work area is cleaned and rubbish disposed of appropriately |
6.4 | Workplace documentation is completed |
Interpret work order and locate and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Identify materials used in the work process
Follow work instructions, operating procedures and inspection processes to:
minimise the risk of injury to self or others
prevent damage to goods, equipment and products
maintain required production output and product quality
Prepare two (2) different types of parquetry floors from the following list:
block (mandatory) and
mosaic or multi-directional patterned
Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements
Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures
Avoid backtracking, work flow interruptions or wastage
Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity
State or territory WHS legislation, regulations, standards and codes of practice relevant to fine sanding parquetry flooring
Organisational and site standards, requirements, policies and procedures for coarse, finish and fine sanding and filling parquetry flooring
Characteristics, requirements and techniques for coarse, finish, fine sanding and filling parquetry flooring
Types and uses of relevant tools and equipment used to conduct coarse, finish and fine sanding and filling operations
Workplace safety system requirements related to coarse, finish and fine sanding and filling parquetry flooring
Types of tools and equipment and procedures for their safe use, operation and maintenance
Characteristics of materials, products and defects
Set-up and operation of equipment
Products assembly techniques
Procedures for the recording, reporting and maintenance of workplace records and information
Appropriate mathematical procedures for estimation and measurement
Environmental protection requirements
Established communication channels and protocols
Relevant problem identification and resolution
Assessors must:
hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors
have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification
be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.
Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.
Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, multimedia evidence, supervisor’s reports, projects and work samples.
Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.
Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.
Access is required to materials, equipment and specifications relevant to sanding and filling parquetry flooring.