List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Confirm the design requirements | 1.1 | Applicable work health and safety (WHS), legislative and organisational requirements and instructions relevant to the hand carving of wood are verified and complied with |
| | 1.2 | Product design requirements are accessed and confirmed as being feasible |
| | 1.3 | Product design requirements are elaborated on as required and documented to enterprise requirements |
2 | Select and prepare the wood to be hand carved | 2.1 | The design requirements in terms of product specification and product usage are analysed and confirmed |
| | 2.2 | Wood species to satisfy the product specifications are identified |
| | 2.3 | Wood for carving is selected from a detailed analysis and comparison of the product specification and the characteristics, properties and costs of the available wood species |
| | 2.4 | Selected wood is prepared for hand carving |
3 | Select carving tools | 3.1 | Carving tools selected are the most appropriate for the job |
| | 3.2 | Selected carving tools are checked for serviceability, sharpness, maintenance compliance and safety |
| | 3.3 | Faults are rectified or passed to qualified persons for rectification |
| | 3.4 | Equipment is selected to hold or support material for hand tools application, where applicable |
4 | Carve the wood | 4.1 | Method and style of wood carving are selected to meet the design requirements and the selected wood |
| | 4.2 | Carving patterns are applied to and enfaced on the wood to guide the carving and optimise the use of the wood |
| | 4.3 | Carving tools are applied initially to bulk clearances which confirm the wood grain selection and the appropriateness of the tools |
| | 4.4 | Carving tools are applied to the precision requirements of the product design |
5 | Finalise the work sequence | 5.1 | The product is prepared for finishing in accordance with the design specification |
| | 5.2 | Carving tools are cleaned, maintained and stored in accordance with manufacturer specification |
| | 5.3 | Work area is cleared and waste removed |
| | 5.4 | Workplace documentation and/or reports are completed |
Comply with legislation, regulations, standards, codes of practice and established safe practices and procedures for the use of hand tools
Interpret product design and locate and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Hand carve a minimum of two (2) significant products, including:
the interpretation and necessary adoption of the design specifications
the selection of timber for the carving
the completion of the carving to specification or commercially acceptable standard
the preparation of the products for finishing
Carry out operator maintenance on hand tools, including the grinding and sharpening of a range of knives and chisels
Follow work instructions, operating procedures and inspection practices to:
prevent damage to goods, equipment and products
maintain required production output and product quality
minimise the risk of injury to self and others
Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements
Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures
Minimise wastage of resources, including materials, time and money
Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity
State or territory WHS legislation, regulations, standards and codes of practice relevant to hand carving of wood
Terminology covering hand carving operations and materials
Types, characteristics, used and limitations of timber species for hand carving
Techniques for the design and documentation of specifications for hand carved products
Organisational and site standards, requirements, policies and procedures for hand carving of wood
Types, characteristics, uses, limitations and maintenance requirements of the range of tools used in wood carving
Processes for evaluating the quality of carving tools in terms of specifications, safety, maintainability and commercial reputation
Range of commonly used hand carving techniques
Established communication channels and protocols
Relevant problem identification and resolution
Workplace safety requirements and WHS legislation
Work flow within the workplace
Assessors must:
hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors
have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification
be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.
Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.
Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, multimedia evidence, supervisor’s reports, projects and work samples.
Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.
Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.
Access is required to significant hand carving requirements, including design brief or specification, a range of optional timbers, and a range of quality carving tools and materials for the preparation of the product for finishing.