Assessor Resource

MSFKB4003
Identify and document services required to support fitted furniture designs

Assessment tool

Version 1.0
Issue Date: May 2024


This unit of competency covers assessing available services and determining service requirements to achieve new fitted furniture design proposals, such as those for a kitchen or bathroom application.

Licensing, legislative or certification requirements may apply to this unit and relevant state/territory and local government agencies should be consulted to determine any necessary certification or licensing for undertaking kitchen and bathroom work. Access to construction sites requires certification of general induction training specified by the National Code of Practice for Induction for Construction Work (ASCC 2007).

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Identify and document available services

1.1

Access to work area is arranged with client

1.2

On-site work health and safety (WHS) procedures are followed

1.3

Plumbing, water outlets and drainage features are located and documented on site diagrams or plans

1.4

Electrical and data outlets are located and documented on site diagrams or plans

1.5

Location and type of lighting sources are located and documented on site diagrams or plans

1.6

Type and capacity of services are identified and details documented

1.7

Measurements are taken to inform layout documentation

1.8

Industry symbols and protocols are used to document information about services

2

Examine implications of services on design

2.1

Design brief, drawings and plans are examined to determine intentions or options for services

2.2

Details obtained from site are assessed against design information

2.3

Appliances identified in the design brief are identified and implications on services examined

2.4

Compliance issues relating to the location of services are identified

2.5

Implications of current services on design are determined

3

Determine and document lighting and electrical system layout

3.1

Requirements of the lighting and electrical system layout are ascertained from the design brief

3.2

Lighting is assessed for effect and suitability to functional and ambience requirements

3.3

Performance and characteristics required of electrical products are assessed and reviewed

3.4

Environmental considerations are analysed in respect of the lighting and electrical system layout

3.5

Ergonomic, anthropometric and proxemic principles are assessed in respect of the lighting and electrical system layout and the intended products

3.6

Costs associated with purchasing and obtaining the products are analysed and documented

3.7

Electrical contractors are consulted as required to confirm implications on design

3.8

Lighting and electrical system layout is determined to meet the design brief

4

Determine and document plumbing system layout

4.1

Requirements of the plumbing system are ascertained from the design brief

4.2

Performance and characteristics required of plumbing products are assessed and reviewed

4.3

Gas requirements are determined and included in system layout

4.4

Environmental considerations are analysed in respect of the plumbing system layout

4.5

Ergonomic, anthropometric and proxemic principles are assessed in respect of the plumbing system layout and the intended products

4.6

Costs associated with purchasing and obtaining the products are analysed and documented

4.7

Plumbing contractors are consulted as required to confirm implications on design

4.8

Plumbing layout is determined to meet the design brief

5

Complete layout documentation

5.1

Sketches and drawings are completed to identify the layout of electrical and lighting system and products

5.2

Sketches and drawings are completed to identify the layout of plumbing system and products

5.3

Sketches and drawings are completed to industry standards

5.4

Specifications are documented according to industry standards

Assess a site and identify available services, including electrical, gas, plumbing and data, and determine supply and layout issues that will impact on a fitted furniture design and installation

Establish the fittings and appliances to be included in a fitted furniture design and the services required for their installation and use

Determine all services that are required to meet a design brief and complete industry standard drawings and specifications to identify their layout on the installation site

Use mathematical ideas and techniques to correctly complete measurements, estimate service supply and draw layouts to scale

Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures

Avoid backtracking, work flow interruptions or wastage

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

Ergonomic, anthropometric and proxemic principles

Industry symbols and protocols

Planning processes

State or territory WHS legislation, regulations, standards and codes of practice relevant to the full range of determining layout for kitchen and bathroom services

Procedures for documenting workplace records and information

Appropriate mathematical procedures for estimation and measurement

Environmental protection requirements

Basic building and architectural terminology

Range of kitchen products and service requirements

Range of bathroom products and service requirements

Statutory planning regulations affecting services in kitchens and bathrooms

Assessors must:

hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors

have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification

be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.

Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.

Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, supervisor’s reports and completed services layout design projects.

Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.

Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.

Access is required to tools and equipment to determine and document layout requirements; and plans, drawings and manuals relating to the project.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Identify and document available services

1.1

Access to work area is arranged with client

1.2

On-site work health and safety (WHS) procedures are followed

1.3

Plumbing, water outlets and drainage features are located and documented on site diagrams or plans

1.4

Electrical and data outlets are located and documented on site diagrams or plans

1.5

Location and type of lighting sources are located and documented on site diagrams or plans

1.6

Type and capacity of services are identified and details documented

1.7

Measurements are taken to inform layout documentation

1.8

Industry symbols and protocols are used to document information about services

2

Examine implications of services on design

2.1

Design brief, drawings and plans are examined to determine intentions or options for services

2.2

Details obtained from site are assessed against design information

2.3

Appliances identified in the design brief are identified and implications on services examined

2.4

Compliance issues relating to the location of services are identified

2.5

Implications of current services on design are determined

3

Determine and document lighting and electrical system layout

3.1

Requirements of the lighting and electrical system layout are ascertained from the design brief

3.2

Lighting is assessed for effect and suitability to functional and ambience requirements

3.3

Performance and characteristics required of electrical products are assessed and reviewed

3.4

Environmental considerations are analysed in respect of the lighting and electrical system layout

3.5

Ergonomic, anthropometric and proxemic principles are assessed in respect of the lighting and electrical system layout and the intended products

3.6

Costs associated with purchasing and obtaining the products are analysed and documented

3.7

Electrical contractors are consulted as required to confirm implications on design

3.8

Lighting and electrical system layout is determined to meet the design brief

4

Determine and document plumbing system layout

4.1

Requirements of the plumbing system are ascertained from the design brief

4.2

Performance and characteristics required of plumbing products are assessed and reviewed

4.3

Gas requirements are determined and included in system layout

4.4

Environmental considerations are analysed in respect of the plumbing system layout

4.5

Ergonomic, anthropometric and proxemic principles are assessed in respect of the plumbing system layout and the intended products

4.6

Costs associated with purchasing and obtaining the products are analysed and documented

4.7

Plumbing contractors are consulted as required to confirm implications on design

4.8

Plumbing layout is determined to meet the design brief

5

Complete layout documentation

5.1

Sketches and drawings are completed to identify the layout of electrical and lighting system and products

5.2

Sketches and drawings are completed to identify the layout of plumbing system and products

5.3

Sketches and drawings are completed to industry standards

5.4

Specifications are documented according to industry standards

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Unit context includes:

WHS requirements, including legislation, building codes, material safety management systems, hazardous and dangerous goods codes, and local safe operating procedures or equivalent

work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements

work requires individual to demonstrate some discretion, judgement and problem solving in the determination of service requirements for fitted furniture applications, such as kitchens and bathrooms. It applies to the assessment of services, such as plumbing, gas and electricity supply, air conditioning, ventilation, lighting and data to determine implications for new designs

work is limited to determining the service requirements for a design, including location, number and types of taps, power outlets and exhausts for a kitchen or bathroom space. It does not include layout of service pipes, wiring, conduits or installation of services

Lighting sources include:

incandescent

fluorescent

halogen or dichroic

natural light

Type and capacity of services include:

number of outlets, controls and switches

capacity to service kitchen appliances and products

capacity to service bathroom appliances and products

capacity of household electrical load

adequacy of lighting

Implications of current services on design include:

requirements for relocation

relative costs associated with relocation

requirements for capacity increase

relative costs associated with increasing capacity

changes required for fixtures and fittings

Performance and characteristics include:

assessment of products to determine if they meet the requirements of the intended end use application and how well they do it

the durability and composition of the product

Electrical products include:

refrigerator

stove

appliances

air conditioners

ventilation systems

hot water systems

Environmental considerations include:

how the use of raw materials effects the ecology and environment and how its continued use will affect the area it has been sourced from

energy consumption in achieving the material

greenhouse gases created

waste levels

resource utilisation and transport effects

what impact will be felt by reducing or stopping material from the source

Costs include:

contractors

products and materials together with the cost of obtaining them either locally, interstate or overseas

Plumbing products include:

water filters

tap ware and sinks

drainage

dishwasher

shower recesses

baths and spas

toilet and bidet

washing machines

Sketches and drawings include:

hand drawn images or ideation drawings completed freehand

drafted technical drawings

drawings produced on computer using computer-aided design (CAD) software packages

Personal protective equipment includes:

that prescribed under legislation, regulations and enterprise policies and practices

Assess a site and identify available services, including electrical, gas, plumbing and data, and determine supply and layout issues that will impact on a fitted furniture design and installation

Establish the fittings and appliances to be included in a fitted furniture design and the services required for their installation and use

Determine all services that are required to meet a design brief and complete industry standard drawings and specifications to identify their layout on the installation site

Use mathematical ideas and techniques to correctly complete measurements, estimate service supply and draw layouts to scale

Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures

Avoid backtracking, work flow interruptions or wastage

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

Ergonomic, anthropometric and proxemic principles

Industry symbols and protocols

Planning processes

State or territory WHS legislation, regulations, standards and codes of practice relevant to the full range of determining layout for kitchen and bathroom services

Procedures for documenting workplace records and information

Appropriate mathematical procedures for estimation and measurement

Environmental protection requirements

Basic building and architectural terminology

Range of kitchen products and service requirements

Range of bathroom products and service requirements

Statutory planning regulations affecting services in kitchens and bathrooms

Assessors must:

hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors

have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification

be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.

Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.

Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, supervisor’s reports and completed services layout design projects.

Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.

Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.

Access is required to tools and equipment to determine and document layout requirements; and plans, drawings and manuals relating to the project.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Access to work area is arranged with client 
On-site work health and safety (WHS) procedures are followed 
Plumbing, water outlets and drainage features are located and documented on site diagrams or plans 
Electrical and data outlets are located and documented on site diagrams or plans 
Location and type of lighting sources are located and documented on site diagrams or plans 
Type and capacity of services are identified and details documented 
Measurements are taken to inform layout documentation 
Industry symbols and protocols are used to document information about services 
Design brief, drawings and plans are examined to determine intentions or options for services 
Details obtained from site are assessed against design information 
Appliances identified in the design brief are identified and implications on services examined 
Compliance issues relating to the location of services are identified 
Implications of current services on design are determined 
Requirements of the lighting and electrical system layout are ascertained from the design brief 
Lighting is assessed for effect and suitability to functional and ambience requirements 
Performance and characteristics required of electrical products are assessed and reviewed 
Environmental considerations are analysed in respect of the lighting and electrical system layout 
Ergonomic, anthropometric and proxemic principles are assessed in respect of the lighting and electrical system layout and the intended products 
Costs associated with purchasing and obtaining the products are analysed and documented 
Electrical contractors are consulted as required to confirm implications on design 
Lighting and electrical system layout is determined to meet the design brief 
Requirements of the plumbing system are ascertained from the design brief 
Performance and characteristics required of plumbing products are assessed and reviewed 
Gas requirements are determined and included in system layout 
Environmental considerations are analysed in respect of the plumbing system layout 
Ergonomic, anthropometric and proxemic principles are assessed in respect of the plumbing system layout and the intended products 
Costs associated with purchasing and obtaining the products are analysed and documented 
Plumbing contractors are consulted as required to confirm implications on design 
Plumbing layout is determined to meet the design brief 
Sketches and drawings are completed to identify the layout of electrical and lighting system and products 
Sketches and drawings are completed to identify the layout of plumbing system and products 
Sketches and drawings are completed to industry standards 
Specifications are documented according to industry standards 

Forms

Assessment Cover Sheet

MSFKB4003 - Identify and document services required to support fitted furniture designs
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MSFKB4003 - Identify and document services required to support fitted furniture designs

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: