List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Plan work operations | 1.1 | Specifications concerning design, fabrics and finish are confirmed with designer/client, as required |
| | 1.2 | Work health and safety (WHS) requirements, including ergonomic criteria and personal protection needs, are observed throughout the work |
| | 1.3 | Suitable work area is selected, tidied and cleaned of any contaminants |
| | 1.4 | Appropriate equipment and tools are selected and checked for the required fitting and assembly process |
2 | Select and inspect fabrics and components | 2.1 | Fabric panels are checked in terms of quantity, quality, contaminants, size, pattern and consistency |
| | 2.2 | Grade of foam is selected and checked in accordance with work order |
| | 2.3 | Appropriate padding and springs are selected and checked |
3 | Assemble components and fit fabric cover | 3.1 | Work pieces are laid out in sequence according to specifications, construction process and workplace procedures |
| | 3.2 | Padding and underlay materials are attached to spring unit using appropriate enterprise techniques and equipment |
| | 3.3 | Covering fabrics are applied to mattress ensuring patterns, naps, sheens, direction of pattern, pattern repeat and finished side of the materials are positioned appropriate to the design |
| | 3.4 | Fabric finish over the spring unit is smooth and consistent |
| | 3.5 | Weaving lines are straight |
| | 3.6 | Finish of applied fabric is checked against quality standards |
4 | Clean work areas and maintain equipment | 4.1 | Faulty and/or defective equipment is tagged and reported in accordance with workplace WHS procedures |
| | 4.2 | Waste and scrap is removed following workplace procedures |
| | 4.3 | Tools and equipment used are cleaned, inspected for serviceable condition and stored appropriately in accordance with workplace procedures |
| | 4.4 | Equipment and work area clean-up is maintained in accordance with workplace procedures |
Interpret work order and locate and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Identify materials used in the work process
Follow work instructions, operating procedures and inspection processes to:
minimise the risk of injury to self or others
prevent damage to goods, equipment and products
maintain required production output and product quality
Identify and select materials used and any special handling requirements and assemble mattress components to construct the following:
one (1) pillow top mattress
one (1) standard sprung mattress
Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements
Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures
Avoid backtracking, work flow interruptions or wastage
Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity
Work requirements, including workplace standards
Fabric types and characteristics, common faults and inspection procedures
Padding/underlay materials and spring units
Risks to health from repetitive actions and prevention strategies
Design features of the finished furnishing items
Assessors must:
hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors
have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification
be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.
Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.
Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, multimedia evidence, supervisor’s reports, projects and work samples.
Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.
Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.
Access is required to appropriate tools, plain and patterned fabrics, padding materials, spring units, fixing materials and tools, work procedures and equipment instructions.