List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Determine material requirements | 1.1 | Characteristics of timber, metal and synthetic materials used in piano construction are analysed according to structural and aesthetic requirements |
| | 1.2 | Client requirements and desires are reviewed, confirmed and clarified |
2 | Select and use fasteners | 2.1 | Work instructions are used to determine job requirements for fasteners, including design, colour, finish process and quality |
| | 2.2 | Fasteners are applied according to workplace requirements |
| | 2.3 | Worksite is set up according to the task, including preparation of required material and selection of holding and supporting equipment |
| | 2.4 | Work is placed and held or supported in position for fastener application |
| | 2.5 | Tools are selected and used to attach fasteners according to their safety and effecting intended purposes |
| | 2.6 | Personal protective equipment is selected, correctly fitted and used |
3 | Select and use adhesives | 3.1 | Adhesives are selected according to workplace requirement |
| | 3.2 | Worksite is set up according to the task, including preparation of required materials and selection of holding and supporting equipment |
| | 3.3 | Work is placed and held or supported in position for adhesive application |
| | 3.4 | Personal protective equipment is selected, correctly fitted and used |
| | 3.5 | Work health and safety (WHS) requirements that apply to the safe application of adhesives are identified and followed |
| | 3.6 | Adhesives are applied using clamping techniques, as required |
4 | Identify surface coatings and finishes for pianos and identify hardware needs | 4.1 | Surface coatings used for both interior and exterior finishing on piano components are identified, with preparation, application and durability |
| 4.2 | Furniture finishes used are investigated for requirements |
| | 4.3 | Work requirements are used to determine hardware needs for piano construction and repair |
5 | Clean up work area | 5.1 | All tools, materials and other equipment are checked, cleaned and returned to their appropriate location |
| | 5.2 | Work area is cleared and waste removed |
| | 5.3 | Workplace documentation is completed and filed |
Interpret work order and locate and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Follow work instructions, operating procedures and inspection processes to:
minimise the risk of injury to self or others
prevent damage to goods, equipment and products
maintain required production output and product quality
Locate, interpret and apply information relevant to selection and use of materials, fasteners, hardware and adhesives for piano repair and manufacture, including:
identifying, selecting and applying at least three (3) types of fasteners and adhesives to appropriate materials
identify surface coatings and finishes used in piano repair and manufacture
Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements
Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures
Avoid backtracking, work flow interruptions or wastage
Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity
State or territory WHS legislation, regulations, standards and codes of practice relevant to the full range of processes for selecting materials for piano repair and manufacture
Organisational and site standards, requirements, policies and procedures for selecting materials for piano repair and manufacture
Reading and interpreting workplace documents including work orders, work instructions and operator instructions
Environmental protection requirements relating to the disposal of waste material
Established lines of communication and protocols
Types, characteristics, uses, limitations and preparation of materials and equipment used in piano repair and manufacture
Types of tools and equipment used to repair and manufacture pianos and procedures for their safe use, operation and maintenance
Characteristics of hardware and materials and their use
Relevant problem identification and resolution
Set-up and operation of tools and equipment used to repair and manufacture pianos
Storage systems and labelling
Procedures for the recording, reporting and maintenance of workplace records and information
Appropriate mathematical procedures for estimation and measurement
Assessors must:
hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors
have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification
be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.
Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.
Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, multimedia evidence, supervisor’s reports, projects and work samples.
Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.
Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.
Access is required to hand and power tools used in the repair and manufacture of pianos, materials used in the repair and manufacture of pianos, safety and personal protective equipment, and holding and supporting equipment.