List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Prepare for work | 1.1 | Specifications, patterns and/or plans are read and interpreted to identify required colour and quality of materials, number of items to be cut and tools and equipment required |
| | 1.2 | Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work |
| | 1.3 | Suitable work area is selected, prepared and cleaned of any contaminants |
| | 1.4 | Pattern pieces are identified to match shapes to final wear characteristics of the furnishing component |
| | 1.5 | Suitable scissors and/or blades are selected for the leather to be cut |
| | 1.6 | Scissors and any other tools and equipment are checked prior to use for appropriate sharpness, operation and safe condition |
| | 1.7 | Hide is selected, spread out and inspected to identify flaws and harder and softer wearing parts |
| | 1.8 | Direction of natural markings and finished side of the leather are identified |
2 | Lay out pattern | 2.1 | Patterns are laid out following workplace procedures and instructions using low wear parts of the hide on the less heavily used furniture components |
| | 2.2 | Patterns are laid out to maximise use of the hide for the furniture design |
| | 2.3 | Any registration points on the pattern and other instructions to match required pattern components are marked |
| | 2.4 | Any required measurements are made and appropriate adjustments made |
3 | Cut leather | 3.1 | Required cutting operations are completed with cut-out leather components identified in accordance with work instructions and procedures |
| | 3.2 | Cut work is inspected, any faults identified and appropriate action taken in accordance with workplace procedures to ensure cut pieces meet the required quality standards |
| | 3.3 | The performance of the cutting equipment is regularly checked for signs of faulty operation, including evidence from the inspection of cut pieces |
| | 3.4 | Where required, cut out components are wrapped using appropriate protective covers and care label information is attached |
4 | Complete work | 4.1 | Unused materials are stored as required |
| | 4.2 | Cut components are folded, protected and despatched to next process following workplace procedures |
| | 4.3 | Work area is cleaned and damaged tools tagged, as required |
| | 4.4 | Waste is collected and bundled for recycling/reuse, as required |
Interpret work order and locate and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Identify materials used in the work process
Follow work instructions, operating procedures and inspection processes to:
minimise the risk of injury to self or others
prevent damage to goods, equipment and products
maintain required production output and product quality
As a minimum:
identify and select leather for a leather armchair
measure and cut selected leather to match patterns
Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements
Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures
Avoid backtracking, work flow interruptions or wastage
Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity
Work requirements, including workplace standards and inspection procedures
Leather types, common faults, and wear capability of different parts of the hide
Work flow in relation to cutting leather
Design features of the finished furnishing items in relation to laying out the pattern and cutting the leather
Assessors must:
hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors
have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification
be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.
Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.
Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, multimedia evidence, supervisor’s reports, projects and work samples.
Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.
Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.
Access is required to appropriate scissors and cutting blades, leather, patterns and a work order.