List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Confirm requirements for monitoring activities | 1.1 | Review job request to confirm the purpose and objectives of monitoring activities with supervising staff |
| 1.2 | Review emergency plans, site hazards, risk assessments, safe work procedures and environmental requirements, associated with the monitoring activities and site requirements |
| 1.3 | Review any available data from previous monitoring at the site to identify expected values and any trends in results |
| 1.4 | Liaise with client to arrange site access, confirm timing and clarify the need for permits, induction training or any other special requirements |
| 1.5 | Confirm details of monitoring instruments to be used, parameters to be measured and the data formats required by users |
|
2 | Prepare for monitoring activities | 2.1 | Complete all administrative requirements and obtain appropriate approvals/permits |
| 2.2 | Make appropriate travel arrangements to and from the site, as required |
| 2.3 | Assemble all required instruments, equipment and supplies and check that they are fit for purpose |
| 2.4 | Stow monitoring instruments, equipment and supplies to ensure their safe transport |
| 2.5 | Liaise with appropriate personnel on arrival at site to ensure safety and minimise disruption to other workers during monitoring |
| 2.6 | Complete site induction as necessary |
|
3 | Collect and verify monitoring data | 3.1 | Use barriers and signage to control access to work area in accordance with workplace safety procedures |
| 3.2 | Perform pre-use checks of instruments and trial measurements to ensure they are operating within specifications |
| 3.3 | Identify location for monitoring in accordance with work instructions and/or test method |
| 3.4 | Operate instruments safely and in accordance with work instructions, test method, and/or manufacturer specifications |
| 3.5 | Take sufficient measurements to ensure that data meets quality requirements |
| 3.6 | Recognise obvious errors or atypical data and take appropriate corrective actions |
| 3.7 | Recognise and record/photograph details of site conditions that may impact on data quality |
| 3.8 | Seek advice to deal with any situation beyond own technical competence |
|
4 | Finalise monitoring activities | 4.1 | Remove signage and barriers and reinstate all disturbed surfaces in accordance with workplace procedures |
| 4.2 | Ensure all data are stored safely before shutdown of instrument/equipment |
| 4.3 | Clean all instruments and equipment (and vehicle as necessary) to avoid environmental damage, including stormwater run-off and/or transfer of pests |
| 4.4 | Check that all instruments, equipment and supplies are present and undamaged before re-stowing them for safe transport |
| 4.5 | Notify appropriate site personnel on completion of monitoring activities and prior to leaving site |
| 4.6 | On return to base, check serviceability of instruments and equipment before storage |
| 4.7 | Download data into laboratory/workplace information management system in accordance with workplace procedures |
| 4.8 | Complete site safety plans, instrument/equipment logs and test reports in accordance with workplace procedures |
| 4.9 | Notify supervising staff upon completion of activities |
| 4.10 | Report any significant issues arising from monitoring activities to appropriate personnel |
|
5 | Maintain a safe work environment | 5.1 | Use safe work procedures and personal protective equipment (PPE) to ensure personal safety and that of others |
| 5.2 | Minimise environmental impacts of monitoring activities and generation of waste |
| 5.3 | Collect and/or dispose of all waste in accordance with environmental/quarantine requirements and workplace procedures |
Evidence of competence in this unit must satisfy all of the requirements of the elements and performance criteria, and include demonstration of:
safely monitoring civil engineering structures on at least three (3) occasions to measure their performance, confirm design parameters and/or measure the effects of improvements or rehabilitation
liaising effectively with clients and site personnel to arrange for monitoring to be performed safely and efficiently
interpreting and applying work instructions, safety information, test methods and workplace procedures with close attention to detail
confirming requirements and assembling resources for monitoring activities
setting up, operating and troubleshooting monitoring equipment in the field in accordance with test methods and/or workplace procedures
recording and interpreting data in the field accurately
recognising and rectifying obvious errors or unexpected results and troubleshooting common problems
taking appropriate corrective actions, including:
logical checking of equipment setup
checking of calibration, zero error, drift for measuring instrument, data entry/storage and transfer
replacement of batteries, instrument boards/cards, and leads and connectors
careful re-reading of procedures and checklists
repeating measurements
seeking timely advice
estimating/calculating simple scientific quantities, such as stress, strain and pressure
downloading/storing data and site information and reporting results within the required timeframe
working semi-autonomously, demonstrating a professional approach and positive company/organisation image
maintaining security, integrity and traceability of all samples, data/results and documentation
following workplace procedures for minimising environmental impacts, maintaining equipment and for the collection and disposal of waste.
Must provide evidence that demonstrates knowledge of:
purpose and principles of monitoring activities routinely performed in job role and the properties of materials and/or structures being monitored
operating procedures for monitoring instruments and equipment routinely used in job role, including the pre-use checks, function of key components, effects of varying key controls, connections, data acquisition fundamentals and common problems
basic instrument fault identification and rectification procedures
expected measurement values, precision, units, sources of uncertainty and methods for their control
procedures for verifying and recording instrumental data, reporting site observations and results, performing calculations and dealing with unexpected or atypical results and/or equipment problems
procedures for ensuring security, traceability of data and results, and confidentiality requirements
relevant hazards, work health and safety (WHS) and environmental management requirements.
Judgment of competence must be based on holistic assessment of the evidence. Assessment methods must confirm consistency of performance over time, rather than a single assessment event.
This unit of competency is to be assessed in the workplace or a simulated workplace environment. A simulated workplace environment must reflect realistic operational workplace conditions that cover all aspects of workplace performance, including the environment, task skills, task management skills, contingency management skills and job role environment skills.
Foundation skills are integral to competent performance of the unit and should not be assessed separately.
Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.
Knowledge evidence may be collected concurrently with performance evidence or through an independent process, such as workbooks, written assessments or interviews (provided a record is kept in each case).
This unit of competency may be assessed with:
MSL924001 Process and interpret data
MSL924002 Use laboratory application software
MSL943002 Participate in laboratory or field workplace safety
Holistic assessment methods include:
review of monitoring data, results and records generated by the candidate
feedback from supervisors and clients regarding the candidate's ability to work independently and conduct a range of monitoring activities reliably, safely and efficiently
questions to assess understanding of workplace procedures, monitoring activities, test methods and interpretation of data relevant to their job role.
Access is required to instruments, equipment, materials, workplace documentation, procedures and specifications associated with this unit, including, but not limited to:
access to civil engineering structures and relevant site documentation
survey equipment, monitoring instruments and equipment, such as transducers, accelerometers, load cells, pieziometers, strain gauges and thermocouples
signal conditioning and data storage devices, such as amplifiers, data loggers and portable computers
global positioning system (GPS) and communication equipment
digital camera
signage, warning lights and boundary tape/cones, umbrellas and shade structures
workplace procedures, test methods and description of monitoring activities, data sets and records, and worksheets.
Assessors must satisfy the assessor competency requirements that are in place at the time of the assessment as set by the VET regulator.
The assessor must demonstrate both technical competence and currency.
Technical competence can be demonstrated through:
relevant VET or other qualification/Statement of Attainment AND/OR
relevant workplace experience.
Currency can be demonstrated through:
performing the competency being assessed as part of current employment OR
having consulted with a laboratory about performing the competency being assessed within the last twelve months.