List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Assist with preliminary site study | 1.1 | Locate and review relevant legislative, regulatory and/or planning requirements and register for contaminated sites. |
| 1.2 | Confirm the site location, scope and purpose of the investigation and assigned tasks with supervisor. |
| 1.3 | Source and review available site data, including site history, geology, hydrogeology and meteorology data. |
| 1.4 | Summarise information to assist with preparation of a site chronology and identification of gaps or inadequacies in data, potential contaminants and areas of possible contamination. |
|
2 | Prepare for site activities | 2.1 | Confirm the scope and purpose of sampling, testing and/or monitoring activities and data requirements with supervisor. |
| 2.2 | Liaise with site controller to access site, identify locations of services and arrange for induction, clearances and/or permits, as necessary. |
| 2.3 | Review risks posed by site contaminants and review the health and safety plan/safe work procedures specified for planned activities. |
| 2.4 | Confirm the sampling/test methods, sampling/test points, numbers and types of samples and/or measurements with supervisor. |
| 2.5 | Review specified sampling/test methods with close attention to the sequence of steps and details for each. |
| 2.6 | Check the operation/calibration of required sampling equipment, test and/or monitoring instruments in accordance with relevant methods, standards and manufacturer instructions. |
| 2.7 | Ensure all required reagents, solutions and/or calibration standards are obtained and ready for field use. |
| 2.8 | Assemble and safely stow all sampling equipment, test instruments, materials, containers, safety equipment and personal protective equipment (PPE). |
| 2.9 | Arrange suitable transport to, from and around site, as required. |
|
3 | Assist with site inspection | 3.1 | Sketch, map and/or photograph the site features. |
| 3.2 | Conduct a visual inspection to identify site features that may inform the need for and design of subsequent investigations. |
| 3.3 | Collect preliminary samples, as directed, to help characterise possible contamination hazards prior to detailed investigations. |
|
4 | Conduct sampling as directed | 4.1 | Locate sampling/test points and any services at the site. |
| 4.2 | Work effectively with other site personnel during drilling excavation and/or survey operations to collect reliable samples, logs and measurements, as necessary. |
| 4.3 | Follow specified procedures to minimise hazards and/or contamination of samples, self/others, equipment and environment. |
| 4.4 | Collect and preserve required samples in accordance with sampling plan, relevant methods and/or standards. |
| 4.5 | Record all information and label samples in accordance with traceability requirements. |
| 4.6 | Record environmental conditions and/or atypical observations made during sampling that may impact on validity or integrity of samples. |
| 4.7 | Store and transport all samples back to base in accordance with specified method, chain of custody requirements and relevant codes. |
|
5 | Conduct field tests and/or monitoring as directed | 5.1 | Obtain sample or sub-sample for designated field test. |
| 5.2 | Check that all equipment, instruments, reagents and calibration standards are fit for purpose. |
| 5.3 | Set up and calibrate instruments as necessary to ensure safe operation and valid results. |
| 5.4 | Operate equipment/instruments in accordance with test method requirements. |
| 5.5 | Follow specified procedures to minimise hazards and/or contamination of samples, self/others, equipment and environment. |
| 5.6 | Perform required measurements and tests on all samples and standards, if appropriate, in accordance with specified methods. |
| 5.7 | Keep accurate, complete and traceable records of all field observations and test results. |
|
6 | Clean, decontaminate and/or dispose of contaminated equipment and materials | 6.1 | Inspect equipment to assess the degree of contamination. |
| 6.2 | Use specified procedures to remove material from the exposed outer surfaces of sampling/test equipment and PPE. |
| 6.3 | Use specified procedures and reagents to neutralise, wash and/or rinse exposed surfaces. |
| 6.4 | Collect rinsate blanks for analysis and preserve/store in accordance with specified procedure or standard. |
| 6.5 | Stow items for transport only when thoroughly dry. |
| 6.6 | Safely collect all debris and sullage from decontamination in accordance with relevant regulations and codes. |
|
7 | Finalise site activities | 7.1 | Arrange for the safe disposal of all hazardous wastes in accordance with relevant regulations and codes. |
| 7.2 | Ensure all site observations, sampling/test data and results are accurately transferred to the workplace information management system. |
| 7.3 | Store samples in accordance with method, chain of custody requirements and relevant codes, as necessary. |
| 7.4 | Ensure samples are dispatched for analytical testing within recommended holding times. |
|
8 | Process and interpret data | 8.1 | Review test/monitoring data noting atypical observations. |
| 8.2 | Calculate required quantities using relevant test method and ensure values are consistent with expectations. |
| 8.3 | Estimate and document uncertainty of measurement in accordance with workplace procedures, if required. |
| 8.4 | Record processed results in accordance with workplace procedures. |
| 8.5 | Interpret trends in data and/or results and report atypical results promptly to appropriate personnel. |
| 8.6 | Determine if obvious procedure or equipment problems have led to atypical data or results. |
| 8.7 | Compare results with established threshold levels or environmental quality concentration limits, if relevant. |
| 8.8 | Finalise reporting of results in accordance with workplace requirement. |
|
9 | Maintain a safe work environment | 9.1 | Clean all equipment, containers, work area and vehicles according to workplace procedures. |
| 9.2 | Check serviceability of all equipment before storage. |
| 9.3 | Use defined safe work practices and PPE to ensure personal safety and that of others. |
| 9.4 | Minimise the generation of wastes and environment impacts. |
Evidence of competence in this unit must satisfy all of the requirements of the elements and performance criteria, and include demonstration of:
conducting at least one (1) visual site inspection to identify a site’s key features and potential contamination hazards and to inform the design of subsequent investigation(s)
safely collecting, preserving and labelling a set of samples from at least one (1) contaminated site in accordance with a given sampling plan
safely preparing (sub)samples and conducting at least two (2) different tests/analyses in the field using given test methods
interpreting and applying regulatory and planning requirements for contaminated sites, site sampling/monitoring plans, sampling/test methods, standards and workplace procedures
recognising hazards and assessing risks; interpreting and applying health and safety plans and safe work methods, including use of designated safety equipment and personal protective equipment (PPE)
planning for field activities, including researching and summarising site history and chronology, analysing existing data and/or reports, identifying potential contaminants and possible areas of contamination
preparing for field activities, including arranging site access, induction, permits, conducting reconnaissance, reviewing safety requirements and securing the resources required
selecting, checking, packaging and transporting supplies, equipment and instruments to and from the field
collecting reliable samples in accordance with site sampling plan/methods and paying close attention to any pre-treatment, container, preservation, storage, labelling and traceability requirements
demonstrating correct and safe use of test equipment and/or analysers including set-up, pre-use checks, calibration and performance checks to obtain reliable data
recognising atypical results as out-of-normal range or an artefact; identifying and rectifying basic instrument faults
accurately recording site features, environmental conditions and any observations that may impact on reliability of field data
calculating required quantities using appropriate units, precision, uncertainties and/or calibration graphs
interpreting gross features/trends in data, identifying atypical results and/or comparing results with established threshold levels or environmental quality concentration limits
seeking advice when issues/problems are beyond scope of competence/responsibility
writing/compiling concise and accurate reports in accordance with workplace procedures
maintaining, cleaning and decontaminating equipment and PPE in accordance with workplace procedures
working safely and following relevant legislative requirements for the disposal of waste and the preservation of the environment.
Must provide evidence that demonstrates knowledge of:
scientific terminology covering the sampling/testing of air, water and soil at contaminated sites and relevant to job role
overview of specific legislation, regulations, standards and codes of practice related to contaminated sites, and threshold levels or environmental quality concentration limits for contaminants
common site hazard and risks, risk assessment techniques and use of risk cards
properties and health risks associated with groups of contaminants, such as:
asbestos
heavy metals, such as lead, chromium and arsenic
chemical manufacture and industry wastes, such as acids/alkalis, resins, dyes, paints, solvents, fuels, oils, fertilisers, insecticides, herbicides, fungicides, aromatic hydrocarbons, phenols, chlorinated phenols, chlorinated benzenes and organochlorines
overview of sampling plan design for contaminated sites, including preliminary sampling, non-targeted/grid sampling, targeted/judgemental sampling, and different sampling strategies for gas, water and soil
sampling/test methods/standards relevant to site activities undertaken
function of key instrument components and operating principles of common sampling/test equipment relevant to site activities undertaken
common procedure/equipment problems leading to atypical data/results
processes for labelling, ensuring chain of custody/traceability of samples and management of large volumes of data
data processing, recording and reporting procedures
hazards, health, safety and environment requirements relevant to site activities undertaken; use of safe work methods, safety equipment and PPE.
Judgement of competence must be based on holistic assessment of the evidence. Assessment methods must confirm consistency of performance over time, rather than a single assessment event.
This unit of competency is to be assessed in the workplace, or a simulated workplace environment. A simulated workplace environment must reflect realistic operational workplace conditions that cover all aspects of workplace performance, including the environment, task skills, task management skills, contingency management skills and job role environment skills.
Foundation skills are integral to competent performance of the unit and should not be assessed separately.
Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.
Knowledge evidence may be collected concurrently with performance evidence or through an independent process such as workbooks, written assessments or interviews (provided a record is kept in each case).
Holistic assessment methods include:
inspection of contaminated site samples collected by the candidate
review of observations, measurements, test results and calculations provided by the candidate
review of sampling/test records and site reports prepared by the candidate
feedback from supervisors about the candidate’s ability to perform sampling and testing of contaminated sites in accordance with given methods and workplace procedures, work safely and produce reliable results within the agreed timeframe
oral and/or written questions to assess the candidate’s understanding of the principles of sampling/testing of contaminated sites, risk and safety management at contaminated sites, operation of sampling equipment/test instruments/analysers, processing and analysis of data.
Access is required to all instruments, equipment, materials, workplace documentation, procedures, and specifications associated with this unit including, but not limited to:
access to contaminated sites and vehicles
appropriate sampling containers, sampling/test equipment, analysers, reagents/consumables, digital camera, global positioning system (GPS), logbooks and data loggers, and/or computers and communication equipment
specified PPE, safety equipment and decontamination equipment
workplace procedures, work program, maps, site plans, site sampling plans and test methods, standards, environmental data sets, equipment manuals, safety procedures and safe work methods.
Assessors must satisfy the assessor competency requirements that are in place at the time of the assessment as set by the VET regulator.
The assessor must demonstrate both technical competency and currency.
Technical competence can be demonstrated through:
relevant VET or other qualification/Statement of Attainment AND/OR
relevant workplace experience
Currency can be demonstrated through:
performing the competency being assessed as part of current employment OR
having consulted with an organisation providing environmental monitoring, management or technology related services about performing the competency being assessed within the last twelve months.