List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Determine job requirements | 1.1 | Follow standard operating procedures (SOPs) |
| 1.2 | Comply with work health and safety (WHS) requirements at all times |
| 1.3 | Use appropriate personal protective equipment (PPE) in accordance with SOPs |
| 1.4 | Identify job requirements from specifications, drawings, job sheets or work instructions |
|
2 | Prepare to use canvas and sail production tools | 2.1 | Read and interpret workplace procedures and instructions |
| 2.2 | Determine nature of work to be performed, including processes, materials and working environment in which tools are to be used |
| 2.3 | Select appropriate tools for the work tasks to be performed |
| 2.4 | Check tools and set for use |
|
3 | Prepare safe work area for using tools | 3.1 | Establish safe working environment for using tools |
| 3.2 | Plan work with tools to maximise safety, productivity and environmental requirements |
| 3.3 | Eliminate solvents and other sources of flammable or explosive vapours and remove flammable materials which might catch fire if tools likely to produce sparks or flame are used |
| 3.4 | Identify suitable electrical power outlets, if required |
| 3.5 | Clear and clean work area to provide work table or benches free of obstructions and allow clear access to machines and equipment |
| 3.6 | Use barriers or screens to keep other personnel at a safe distance or to shield them from sparks, arc flashes, debris, dust or noise |
| 3.7 | Use suitable floor insulation or residual current devices where electrical tools are to be used in conditions which could present a shock hazard |
| 3.8 | Check emergency shutdown is provided for tool |
|
4 | Prepare work piece | 4.1 | Mount work piece correctly in, or aligned to, the tool or machine to be used |
| 4.2 | Anchor work piece securely, where necessary, to prevent movement |
|
5 | Use tools | 5.1 | Use safety equipment and tools in accordance with industry, WHS and workplace procedures |
| 5.2 | Safely connect electrical tools to power supply, and gas or air hoses to gas/air supplies |
| 5.3 | Follow start-up and shutdown procedures safely when using electrical or gas operated tools |
| 5.4 | Set mechanical tool settings, electrical settings and gas pressures |
| 5.5 | Locate tools in safe positions when not in use |
| 5.6 | Monitor tool operation and discontinue use if abnormal operation or other problems are detected |
| 5.7 | Inspect work to verify tool use meets specifications and relevant industry and workplace quality standards |
|
6 | Maintain tools and work area | 6.1 | Clean work area, and clean and store tools, extension cables and hoses in accordance with industry, WHS and workplace procedures |
| 6.2 | Report abnormal tool operation or other problems in accordance with established workplace procedures |
| 6.3 | Perform programmed maintenance of tools which is within the operator’s responsibility |
Evidence required to demonstrate competence in this unit must be relevant to and satisfy the requirements of the elements and performance criteria, and include:
reading and following work instructions, standard operating procedures (SOPs), safe work practices
applying relevant standards
complying with all relevant safety requirements applying to the use of hand tools on at least two (2) occasions
complying with all relevant safety requirements applying to electrical, air, and gas energised tools on at least two (2) occasions
interpreting work orders relevant to the selection and use of tools on at least five (5) occasions
interpreting specifications and instructions relating to the materials and equipment on which the tools are to be used
preparing work environment for safe and effective tool use, setting up tools for safe and effective use, and demonstrating emergency shutdown of tools, on at least two (2) occasions
performing work processes according to work health and safety (WHS) and machine specifications for a range of standard tools, including at least six (6) hand tools and four (4) power tools, subject to workplace requirements
monitoring tool operation to check correct operation during use
inspecting completed work to verify correct tool operation and use
documenting and communicating work-related information, including reporting of faults and other problems
applying workplace procedures.
Evidence must be provided that demonstrates knowledge of:
safe work practices and procedures and use of personal protective equipment (PPE)
relevant Australian Standards
working with materials, such as:
steel
aluminium
bronze
stainless steel
wood
plastic
canvas
hazards associated with tools using electricity, gas or compressed air
specific WHS requirements associated with hand tools and electrical and gas energised tools
the range of hand, electrical, air and gas energised tools relevant to work performed in the canvas and sail industry
principles of operating tools and equipment used in the industry and their appropriateness for particular applications
power sources such as single phase, three phase and weather-protected outlets
general properties and working characteristics of materials and used in the canvas and sail industry
environmental requirements of relevant industry and workplace procedures
general housekeeping policies and procedures
WHS practices, including hazard identification and control measures
quality practices
workplace procedures
practices for recording and reporting.
Assessors must:
satisfy the assessor competency requirements that are in place at the time of the assessment, as set by the VET regulator
have vocational competency in using canvas and sail production tools, at least to the level being assessed, with relevant industry knowledge and experience.
Assessment should occur in operational workplace situations. Where this is not possible, or where personal safety or environmental damage are limiting factors, assessment must occur in a sufficiently rigorous simulated environment reflecting realistic operational workplace conditions. This must cover all aspects of workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills.
Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.
Conditions for assessment must include access to all tools, equipment, materials and documentation required, including relevant workplace procedures, product and manufacturing specifications associated with this unit.