Assessor Resource

MSTTX3008
Select raw materials

Assessment tool

Version 1.0
Issue Date: May 2024


This unit of competency covers the skills and knowledge required to select raw materials for use in textile production.

The unit of competency applies to development, production and quality assurance activities associated with the selection and checking of raw materials for textile production. The work can include liaison with specialist technicians. Discretion and judgement may be required, for both self and others, in planning and selecting processes, procedures or outcomes.

Work may be conducted in small to large scale enterprises and may involve individual and team related activities.

No licensing, legislative or certification requirements apply to this unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Determine job requirements

1.1

Follow standard operating procedures (SOPs)

1.2

Comply with work health and safety (WHS) requirements at all times

1.3

Use appropriate personal protective equipment (PPE) in accordance with SOPs

1.4

Identify job requirements from specifications, drawings, job sheets or work instructions

2

Prepare to select raw materials

2.1

Confirm requirements for the selection of raw materials and clarify, if necessary

2.2

Select raw materials appropriate for the designated use

3

Check raw materials

3.1

Verify specification of raw materials

3.2

Check selected raw materials are suitable and satisfy quality standards and workplace procedures

3.3

Compare data with standards or other reference materials and record results

4

Report on raw materials

4.1

Document and record raw materials using appropriate worksheets and information systems

4.2

Collate and analyse documentation against specifications

4.3

Interpret documentation and report outcomes

Evidence required to demonstrate competence in this unit must be relevant to and satisfy the requirements of the elements and performance criteria, and include:

reading and following work instructions, standard operating procedures (SOPs), safe work practices

applying relevant standards

selecting at least two (2) appropriate raw materials for designated use/s

checking selected raw materials are suitable for specified process and quality standards on at least two (2) occasions

analysing data against specifications

communicating effectively with design team, customers

documenting and recording raw materials using appropriate worksheets and information systems

collating and analysing documentation against specifications

interpreting documentation and reporting outcomes.

Evidence must be provided that demonstrates knowledge of:

safe work practices and procedures and use of personal protective equipment (PPE)

relevant Australian Standards

selection and checking requirements of raw materials

product and process specifications

raw materials and their properties

quality standards and practices

workplace procedures

recording and reporting practices.

Assessors must:

satisfy the assessor competency requirements that are in place at the time of the assessment, as set by the VET regulator

have vocational competency in selecting raw materials, at least to the level being assessed, with relevant industry knowledge and experience.

Assessment should occur in operational workplace situations. Where this is not possible, or where personal safety or environmental damage are limiting factors, assessment must occur in a sufficiently rigorous simulated environment reflecting realistic operational workplace conditions. This must cover all aspects of workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Conditions for assessment must include access to all tools, equipment, materials and documentation required, including relevant workplace procedures, product and manufacturing specifications associated with this unit.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Determine job requirements

1.1

Follow standard operating procedures (SOPs)

1.2

Comply with work health and safety (WHS) requirements at all times

1.3

Use appropriate personal protective equipment (PPE) in accordance with SOPs

1.4

Identify job requirements from specifications, drawings, job sheets or work instructions

2

Prepare to select raw materials

2.1

Confirm requirements for the selection of raw materials and clarify, if necessary

2.2

Select raw materials appropriate for the designated use

3

Check raw materials

3.1

Verify specification of raw materials

3.2

Check selected raw materials are suitable and satisfy quality standards and workplace procedures

3.3

Compare data with standards or other reference materials and record results

4

Report on raw materials

4.1

Document and record raw materials using appropriate worksheets and information systems

4.2

Collate and analyse documentation against specifications

4.3

Interpret documentation and report outcomes

This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.

Workplace procedures include one or more of the following:

requirements prescribed by legislation, awards, agreements and conditions of employment

SOPs

work instructions

PPE

oral, written and visual communication

quality practices, including responsibility for maintenance of own work quality and contribution to quality improvement of team or section output

housekeeping

tasks related to environmental protection, waste disposal, pollution control and recycling

WHS practices

Australian Standards include:

the relevant industry or Australian Standards that are current at the time this unit is being undertaken

Raw materials include one or more of the following:

wool (greasy, scoured and carbonised) and wool top

cotton

cotton yarn

synthetics, chemicals and dyes

Evidence required to demonstrate competence in this unit must be relevant to and satisfy the requirements of the elements and performance criteria, and include:

reading and following work instructions, standard operating procedures (SOPs), safe work practices

applying relevant standards

selecting at least two (2) appropriate raw materials for designated use/s

checking selected raw materials are suitable for specified process and quality standards on at least two (2) occasions

analysing data against specifications

communicating effectively with design team, customers

documenting and recording raw materials using appropriate worksheets and information systems

collating and analysing documentation against specifications

interpreting documentation and reporting outcomes.

Evidence must be provided that demonstrates knowledge of:

safe work practices and procedures and use of personal protective equipment (PPE)

relevant Australian Standards

selection and checking requirements of raw materials

product and process specifications

raw materials and their properties

quality standards and practices

workplace procedures

recording and reporting practices.

Assessors must:

satisfy the assessor competency requirements that are in place at the time of the assessment, as set by the VET regulator

have vocational competency in selecting raw materials, at least to the level being assessed, with relevant industry knowledge and experience.

Assessment should occur in operational workplace situations. Where this is not possible, or where personal safety or environmental damage are limiting factors, assessment must occur in a sufficiently rigorous simulated environment reflecting realistic operational workplace conditions. This must cover all aspects of workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Conditions for assessment must include access to all tools, equipment, materials and documentation required, including relevant workplace procedures, product and manufacturing specifications associated with this unit.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Follow standard operating procedures (SOPs) 
Comply with work health and safety (WHS) requirements at all times 
Use appropriate personal protective equipment (PPE) in accordance with SOPs 
Identify job requirements from specifications, drawings, job sheets or work instructions 
Confirm requirements for the selection of raw materials and clarify, if necessary 
Select raw materials appropriate for the designated use 
Verify specification of raw materials 
Check selected raw materials are suitable and satisfy quality standards and workplace procedures 
Compare data with standards or other reference materials and record results 
Document and record raw materials using appropriate worksheets and information systems 
Collate and analyse documentation against specifications 
Interpret documentation and report outcomes 

Forms

Assessment Cover Sheet

MSTTX3008 - Select raw materials
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MSTTX3008 - Select raw materials

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: