List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
ELEMENTS | PERFORMANCE CRITERIA |
Elements describe the essential outcomes | Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section. |
1. Identify flow gauging | 1.1 Identify the monitoring objective of the site and gauging requirements. 1.2 Identify appropriate methods for measuring discharge. 1.3 Select equipment and confirm site conditions are within instrument specifications. 1.4 Identify stream discharge and factors affecting accuracy. 1.5 Identify hazards and implement risk management principles. |
2. Collect depth and velocity data | 2.1 Perform a pre-discharge measurement check on equipment. 2.2 Prepare the gauging site. 2.3 Calculate the equipment configuration settings. 2.4 Position equipment at pre-determined position. 2.5 Take measurements during gauging. 2.6 Review the data collected. |
3. Calculate discharge | 3.1 Apply corrections where necessary. 3.2 Calculate the mean velocity. 3.3 Calculate the area and discharge. 3.4 Calculate and record the mean stage and rate of change. 3.5 Calculate the channel storage and time of travel effects. |
4. Report discharge readings | 4.1 Compare the discharge measurements with the current rating. 4.2 Record the percentage deviation from the rating. 4.3 Grade and record the gauging quality with interpretation comments. 4.4 Gather and document supporting information from the site. 4.5 Enter gauging into ratings database. |
Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. The candidate must be assessed in at least one of the methods listed in the Range of Conditions. If not otherwise specified the candidate must demonstrate evidence of performance of the following on at least one occasion.
using area velocity method
assessing risks and applying precautions and action
estimating and explaining the anticipated vertical distribution
making calculations on depth and velocity
maintaining the integrity of measurements
using a range of suitable techniques to determine mean stage in rapidly changing situations
adjusting measurements
plotting discharge measurements on organisation’s preferred scale
using formulae for determining the percentage deviation
using systems and/or software to transfer calculated flows to official database
assembling and testing metering equipment
checking and preparing gauging section
setting tag lines
measuring and calculating readings
gathering, analysing, verifying, interpreting, storing, archiving and reporting data for a range of clients and stakeholders
interpreting complex documentation
sampling
identifying, reporting and solving potential or current problems within scope of job function.
recording the percentage deviation from the rating determined by checking:
calculations
equipment
control
recording equipment
repeat measurement
gathering and documenting supporting information from the site (i.e. gauging section location and access maps, photographic records, site preparation undertaken, comments on issues encountered, data management and reporting)
Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the depth of knowledge demonstrated must be appropriate to the job context of the candidate.
principles and alternative methods of discharge measurement
methods for calculating mean velocity in a vertical
methods for determining the cross-sectional area at a site
requirements for surface, single and multipoint floats
basic mathematical principles for area and velocity measurements
correction procedures for horizontal angles and suspension measurements
techniques for monitoring stage changes during discharge measurement
weighted mean stage calculations
discharge and mean stage adjustment
technical components in calculating discharge
factors impacting on discharge measurements and the quality of the discharge
formulae to adjust gauging
potential impacts of modifications of site, method or equipment on discharge accuracy
confidence limits
Competency should be assessed in an actual workplace or in a simulated environment, with access to equipment and infrastructure appropriate to the outcome. Competency should be demonstrated over time to ensure the candidate is assessed across a variety of situations.
Measuring and processing flows: Assessment must occur on a minimum of two separate occasions, in at least two different locations, using a minimum of two different methods from a broad range of complex methods, with a maximum of one out of two from area velocity methods
Assessors must satisfy the NVR/AQTF mandatory competency requirements for assessors.