List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
ELEMENTS | PERFORMANCE CRITERIA |
Elements describe the essential outcomes | Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section. |
1. Monitor system performance and usage | 1.1 Select and check equipment required for monitoring system performance. 1.2 Schedule and conduct routine inspections and report any identified faults. 1.3 Collect, analyse and report system performance and usage data. 1.4 Monitor and coordinate sample collection and records. |
2. Regulate flows | 2.1 Inspect and adjust flow regulating systems. 2.2 Monitor and adjust volumes. 2.3 Monitor flows and diversions required for repair or emergency activities. |
3. Operate and control processes | 3.1 Control and improve processes to maintain operating parameters. 3.2 Conduct wastewater flow measurements. 3.3 Identify, address and report process faults. 3.4 Optimise process performance. |
4. Compile process records | 4.1 Compile reports from system data. 4.2 Record the condition of equipment and report faults or anticipated problems. |
Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the candidate must demonstrate evidence of performance of the following on at least one occasion.
responding to and correcting operational problems
interpreting plans, charts, service search diagrams, instructions, policies and specifications
controlling system operations
identifying control system faults
monitoring and coordinating the operation of wastewater collection and/or wastewater transfer systems
preparing equipment for monitoring and inspections
monitoring the system and collecting, analysing and reporting data according to organisational procedures
reviewing samples and records
adjusting flow regulating systems
monitoring volumes and flows
controlling, integrating and optimising processes
identifying and reporting process faults
measuring wastewater flows
completing relevant workplace documentation
Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the depth of knowledge demonstrated must be appropriate to the job context of the candidate.
system hydraulics
coordination and control of processes
system layout and processes
environmental aspects of wastewater collection and transfer systems
infiltration and inflow sources
illegal inflows
discharges
disinfection and chemical use
policies, standard operating procedures and legislation
relevant utilities and service bodies
communication systems
risk factors and potential hazards involved with wastewater pressures and flows
equipment operation, capacity and limitations
effects of weather and conditions on operation of collection and transfer systems
pipes and fittings
gravity systems
pumping and valving systems
control systems
forces including gravitational, valve operation, hydraulic and pumps
Competency should be assessed in an actual workplace or in a simulated environment, with access to equipment and infrastructure appropriate to the outcome. Competency should be demonstrated over time to ensure the candidate is assessed across a variety of situations.
Assessors must satisfy the NVR/AQTF mandatory competency requirements for assessors.