Assessor Resource

NWPSOU012
Monitor, inspect and report catchment operations

Assessment tool

Version 1.0
Issue Date: March 2024


This unit describes the skills required to inspect and monitor catchment areas, monitor flows and coordinate catchment processes. The ability to collect data and samples, monitor and adjust regulatory systems, identify and investigate catchment problems and produce technical reports is essential to performance.

This unit applies to those working as field staff with a specific responsibility for inspecting, monitoring and reporting catchment operations.

The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to, particularly those related to WHS.

Those undertaking this unit would work under indirect supervision while performing routine tasks ensuring minimum damage to the environment, in a familiar context. The level of responsibility may vary according to the size and complexity of the catchment area.

No licensing, legislative or certification requirements apply to unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)



Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section.

1. Inspect and monitor catchment operations

1.1 Identify and apply work requirements for undertaking inspections of catchments and surrounding areas.

1.2 Schedule routine inspections of catchment areas to identify water quality risks.

1.3 Inspect and monitor designated locations according to agreed schedule and procedures.

1.4 Inspect flow regulating systems and determine required adjustments to meet demand.

1.5 Select, fit and use required safety equipment, including personal protective equipment.

2. Operate and report catchment conditions

2.1 Measure and record catchment inflows and outflows or extractions.

2.2 Collect and record water samples according to sampling requirements.

2.3 Identify organisation standards for the condition and maintenance of catchment environment.

2.4 Identify and report changes to environmental conditions.

2.5 Identify and report flows into, and conditions of, catchment areas.

3. Assist in investigating hazards, risks and catchment security

3.1 Identify and report activities within catchment that pose a hazard or risk to the public, water quality or the environment.

3.2 Identify and report activities of external parties within the catchment and surrounding area that breach organisational guidelines.

3.3 Check and confirm public complaints and report to relevant personnel.

4. Complete documentation

4.1 Collect and analyse catchment data.

4.2 Review and action investigation results.

4.3 Compile reports from catchment inspections.

Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the candidate must demonstrate evidence of performance of the following on at least one occasion.

using safety equipment and personal protective equipment

using pest eradication equipment

calculating flow and capacity

coordinating safety surveillance

identifying control system faults

inspecting and monitoring catchment areas

monitoring flows

coordinating catchment processes

inspecting catchment areas and identifying water quality risks

monitoring catchment and collecting and reporting catchment data

collecting samples

inspecting and adjusting flow regulating systems

identifying and reporting on flows into the catchment area

assessing and reporting on the condition of the catchment area

identifying and addressing risks and hazards

monitoring and integrating catchments processes

completing documentation

implementing actions resulting from investigations

monitoring and/or reporting illegal activities

Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the depth of knowledge demonstrated must be appropriate to the job context of the candidate.

inspection of catchments

coordination processes

by-laws and legislation

catchment layout and processes

environmental aspects of catchment areas

policies and standard operating procedures

Australian Drinking Water Guidelines (ADWG)

hazardous substances handling

communication systems

risk factors and potential hazards involved with catchment area processes, equipment operation, capacity and limitations

effects of weather and conditions on operation of catchment areas

pest control specifications

Competency should be assessed in an actual workplace or in a simulated environment, with access to equipment and infrastructure appropriate to the outcome. Competency should be demonstrated over time to ensure the candidate is assessed across a variety of situations.

Assessors must satisfy the NVR/AQTF mandatory competency requirements for assessors.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section.

1. Inspect and monitor catchment operations

1.1 Identify and apply work requirements for undertaking inspections of catchments and surrounding areas.

1.2 Schedule routine inspections of catchment areas to identify water quality risks.

1.3 Inspect and monitor designated locations according to agreed schedule and procedures.

1.4 Inspect flow regulating systems and determine required adjustments to meet demand.

1.5 Select, fit and use required safety equipment, including personal protective equipment.

2. Operate and report catchment conditions

2.1 Measure and record catchment inflows and outflows or extractions.

2.2 Collect and record water samples according to sampling requirements.

2.3 Identify organisation standards for the condition and maintenance of catchment environment.

2.4 Identify and report changes to environmental conditions.

2.5 Identify and report flows into, and conditions of, catchment areas.

3. Assist in investigating hazards, risks and catchment security

3.1 Identify and report activities within catchment that pose a hazard or risk to the public, water quality or the environment.

3.2 Identify and report activities of external parties within the catchment and surrounding area that breach organisational guidelines.

3.3 Check and confirm public complaints and report to relevant personnel.

4. Complete documentation

4.1 Collect and analyse catchment data.

4.2 Review and action investigation results.

4.3 Compile reports from catchment inspections.

Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the candidate must demonstrate evidence of performance of the following on at least one occasion.

using safety equipment and personal protective equipment

using pest eradication equipment

calculating flow and capacity

coordinating safety surveillance

identifying control system faults

inspecting and monitoring catchment areas

monitoring flows

coordinating catchment processes

inspecting catchment areas and identifying water quality risks

monitoring catchment and collecting and reporting catchment data

collecting samples

inspecting and adjusting flow regulating systems

identifying and reporting on flows into the catchment area

assessing and reporting on the condition of the catchment area

identifying and addressing risks and hazards

monitoring and integrating catchments processes

completing documentation

implementing actions resulting from investigations

monitoring and/or reporting illegal activities

Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the depth of knowledge demonstrated must be appropriate to the job context of the candidate.

inspection of catchments

coordination processes

by-laws and legislation

catchment layout and processes

environmental aspects of catchment areas

policies and standard operating procedures

Australian Drinking Water Guidelines (ADWG)

hazardous substances handling

communication systems

risk factors and potential hazards involved with catchment area processes, equipment operation, capacity and limitations

effects of weather and conditions on operation of catchment areas

pest control specifications

Competency should be assessed in an actual workplace or in a simulated environment, with access to equipment and infrastructure appropriate to the outcome. Competency should be demonstrated over time to ensure the candidate is assessed across a variety of situations.

Assessors must satisfy the NVR/AQTF mandatory competency requirements for assessors.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Identify and apply work requirements for undertaking inspections of catchments and surrounding areas. 
Schedule routine inspections of catchment areas to identify water quality risks. 
Inspect and monitor designated locations according to agreed schedule and procedures. 
Inspect flow regulating systems and determine required adjustments to meet demand. 
Select, fit and use required safety equipment, including personal protective equipment. 
Measure and record catchment inflows and outflows or extractions. 
Collect and record water samples according to sampling requirements. 
Identify organisation standards for the condition and maintenance of catchment environment. 
Identify and report changes to environmental conditions. 
Identify and report flows into, and conditions of, catchment areas. 
Identify and report activities within catchment that pose a hazard or risk to the public, water quality or the environment. 
Identify and report activities of external parties within the catchment and surrounding area that breach organisational guidelines. 
Check and confirm public complaints and report to relevant personnel. 
Collect and analyse catchment data. 
Review and action investigation results. 
Compile reports from catchment inspections. 
Identify and apply work requirements for undertaking inspections of catchments and surrounding areas. 
Schedule routine inspections of catchment areas to identify water quality risks. 
Inspect and monitor designated locations according to agreed schedule and procedures. 
Inspect flow regulating systems and determine required adjustments to meet demand. 
Select, fit and use required safety equipment, including personal protective equipment. 
Measure and record catchment inflows and outflows or extractions. 
Collect and record water samples according to sampling requirements. 
Identify organisation standards for the condition and maintenance of catchment environment. 
Identify and report changes to environmental conditions. 
Identify and report flows into, and conditions of, catchment areas. 
Identify and report activities within catchment that pose a hazard or risk to the public, water quality or the environment. 
Identify and report activities of external parties within the catchment and surrounding area that breach organisational guidelines. 
Check and confirm public complaints and report to relevant personnel. 
Collect and analyse catchment data. 
Review and action investigation results. 
Compile reports from catchment inspections. 

Forms

Assessment Cover Sheet

NWPSOU012 - Monitor, inspect and report catchment operations
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

NWPSOU012 - Monitor, inspect and report catchment operations

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: