List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
ELEMENTS | PERFORMANCE CRITERIA |
Elements describe the essential outcomes | Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section. |
1. Inspect and monitor catchment operations | 1.1 Schedule routine inspections of catchment areas to identify water quality risks. 1.2 Collect, analyse and report catchment data. 1.3 Collect and record water samples. 1.4 Monitor and report on activities within the catchment area. 1.5 Select, fit and use required safety equipment, including personal protective equipment. |
2. Monitor inflows and outflows | 2.1 Inspect flow regulating systems and determine required adjustments to meet demand. 2.2 Identify and report flows into, and conditions of, catchment areas. |
3. Operate and coordinate catchment processes | 3.1 Identify, address and, if appropriate, report problems within catchment areas. 3.2 Monitor and coordinate processes to maintain the parameters of operation. 3.3 Integrate processes to improve source performance. |
4. Complete documentation | 4.1 Review and action investigation results. 4.2 Compile reports from catchment inspections. |
Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the candidate must demonstrate evidence of performance of the following on at least one occasion.
using safety equipment and personal protective equipment
using pest eradication equipment
calculating flow and capacity
coordinating safety surveillance
identifying control system faults
inspecting and monitoring catchment areas
monitoring flows
coordinating catchment processes
inspecting catchment areas and identifying water quality risks
monitoring catchment and collecting and reporting catchment data
collecting samples
inspecting and adjusting flow regulating systems
identifying and reporting on flows into the catchment area
assessing and reporting on the condition of the catchment area
identifying and addressing risks and hazards
monitoring and integrating catchments processes
completing documentation
implementing actions resulting from investigations
Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the depth of knowledge demonstrated must be appropriate to the job context of the candidate.
inspection of catchments
coordination processes
system layout and processes
environmental aspects of catchment areas
policies and standard operating procedures
a general understanding of water and wastewater treatment and the effect of floods on these systems
Australian Drinking Water Guidelines (ADWG)
hazardous substances handling
communication systems
risk factors and potential hazards involved with catchment area processes, equipment operation, capacity and limitations
effects of weather and conditions on operation of catchment areas
pumping and valving systems
control systems
pest control specifications
Competency should be assessed in an actual workplace or in a simulated environment, with access to equipment and infrastructure appropriate to the outcome. Competency should be demonstrated over time to ensure the candidate is assessed across a variety of situations.
Assessors must satisfy the NVR/AQTF mandatory competency requirements for assessors.