Assessor Resource

NWPSOU052
Inspect and operate groundwater regulation

Assessment tool

Version 1.0
Issue Date: April 2024


This unit describes the skills required to inspect, operate, measure and report on groundwater usage and system performance.

This unit applies to those working as field and operational staff with a specific responsibility for inspecting and checking groundwater sources.

The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to, particularly those related to WHS.

Those undertaking this unit would work under indirect supervision while performing routine tasks in a familiar context, ensuring minimum damage to the environment.

No licensing, legislative or certification requirements apply to unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section.

1. Inspect and report on source performance and usage

1.1 Carry out routine inspections of groundwater bores.

1.2 Collect and record data on groundwater usage and/or bore levels.

1.3 Collect and record water samples.

1.4 Select, fit and use required safety equipment, including personal protective equipment.

2. Check pumps and meters

2.1 Test bore pumps and check flow meters to determine accuracy.

2.2 Adjust pumps and flow meters to conform to the allocation permit.

3. Operate and coordinate processes

3.1 Measure and record extraction volumes.

3.2 Check extraction volumes for compliance with entitlement.

4. Complete documentation

4.1 Record inspection results.

4.2 Report source data.

Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the candidate must demonstrate evidence of performance of the following on at least one occasion.

solving operational problems

calculating flows

following standard operating procedures

identifying control system faults

using safety equipment and personal protective equipment

identifying potential sources of contamination

performing inspection, regulation, operation, measurement and reporting of groundwater systems

inspecting groundwater bores

collecting and recording data

collecting samples

testing and adjusting pumps and flow meters to produce required flows

recording extraction volumes and checking for compliance

completing relevant documentation

Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the depth of knowledge demonstrated must be appropriate to the job context of the candidate.

properties of stored water

communication systems

principles of hydraulics

system layout

control systems

equipment operation

relevant utilities and service bodies

hazardous materials handling

effects of weather and conditions on bulkwater assets

principles of soil mechanics

concrete structure, strengths and deterioration

construction procedures

risk management techniques

WHS

organisational and statutory requirements

Competency should be assessed in an actual workplace or in a simulated environment, with access to equipment and infrastructure appropriate to the outcome. Competency should be demonstrated over time to ensure the candidate is assessed across a variety of situations.

Assessors must satisfy the NVR/AQTF mandatory competency requirements for assessors.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section.

1. Inspect and report on source performance and usage

1.1 Carry out routine inspections of groundwater bores.

1.2 Collect and record data on groundwater usage and/or bore levels.

1.3 Collect and record water samples.

1.4 Select, fit and use required safety equipment, including personal protective equipment.

2. Check pumps and meters

2.1 Test bore pumps and check flow meters to determine accuracy.

2.2 Adjust pumps and flow meters to conform to the allocation permit.

3. Operate and coordinate processes

3.1 Measure and record extraction volumes.

3.2 Check extraction volumes for compliance with entitlement.

4. Complete documentation

4.1 Record inspection results.

4.2 Report source data.

Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the candidate must demonstrate evidence of performance of the following on at least one occasion.

solving operational problems

calculating flows

following standard operating procedures

identifying control system faults

using safety equipment and personal protective equipment

identifying potential sources of contamination

performing inspection, regulation, operation, measurement and reporting of groundwater systems

inspecting groundwater bores

collecting and recording data

collecting samples

testing and adjusting pumps and flow meters to produce required flows

recording extraction volumes and checking for compliance

completing relevant documentation

Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the depth of knowledge demonstrated must be appropriate to the job context of the candidate.

properties of stored water

communication systems

principles of hydraulics

system layout

control systems

equipment operation

relevant utilities and service bodies

hazardous materials handling

effects of weather and conditions on bulkwater assets

principles of soil mechanics

concrete structure, strengths and deterioration

construction procedures

risk management techniques

WHS

organisational and statutory requirements

Competency should be assessed in an actual workplace or in a simulated environment, with access to equipment and infrastructure appropriate to the outcome. Competency should be demonstrated over time to ensure the candidate is assessed across a variety of situations.

Assessors must satisfy the NVR/AQTF mandatory competency requirements for assessors.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Carry out routine inspections of groundwater bores. 
Collect and record data on groundwater usage and/or bore levels. 
Collect and record water samples. 
Select, fit and use required safety equipment, including personal protective equipment. 
Test bore pumps and check flow meters to determine accuracy. 
Adjust pumps and flow meters to conform to the allocation permit. 
Measure and record extraction volumes. 
Check extraction volumes for compliance with entitlement. 
Record inspection results. 
Report source data. 
Carry out routine inspections of groundwater bores. 
Collect and record data on groundwater usage and/or bore levels. 
Collect and record water samples. 
Select, fit and use required safety equipment, including personal protective equipment. 
Test bore pumps and check flow meters to determine accuracy. 
Adjust pumps and flow meters to conform to the allocation permit. 
Measure and record extraction volumes. 
Check extraction volumes for compliance with entitlement. 
Record inspection results. 
Report source data. 

Forms

Assessment Cover Sheet

NWPSOU052 - Inspect and operate groundwater regulation
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

NWPSOU052 - Inspect and operate groundwater regulation

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: