List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
ELEMENTS | PERFORMANCE CRITERIA |
Elements describe the essential outcomes | Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section. |
1. Assess sedimentation and clarification process performance | 1.1 Review existing process performance data. 1.2 Identify the impact of changing incoming water quality on sedimentation and clarification processes in a range of conditions. 1.3 Identify any additional sampling and testing required for valid evaluation of current process performance. |
2. Investigate sedimentation and clarification assets | 2.1 Review existing fault reports and other plant asset information. 2.2 Investigate the operational status of plant components with reference to manufacturer and plant designer specifications. 2.3 Carry out investigations to identify potential deficiencies. |
3. Investigate process optimisation | 3.1 Review relevant fault and incident reports and remedial actions taken. 3.2 Investigate potential changes to operational processes to identify possible optimisation strategies. |
4. Plan process optimisation | 4.1 Determine plant configuration and revised operational processes for process optimisation. 4.2 Plan a trial to test the performance of the determined optimisation options. 4.3 Compile a report making recommendations on optimisation options. |
Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the candidate must demonstrate evidence of performance of the following on at least one occasion.
conducting investigations and reporting on operational or control system problems
coordinating sedimentation and clarification inspection, sampling and testing
performing calculations to provide data for the analysis and development of options and solutions, including at least one of:
surface loading rate
upflow velocity
detention time
weir loading rate
interpreting a range of complex and technical documents, including at least one of:
regulatory, legislative, licensing and organisational requirements
codes and standards
specifications
organisational policies
articulating complex ideas
analysing problems and recommending appropriate remedial solutions
identifying risks and hazards
reviewing existing sedimentation and clarification process performance with reference to historical data, differences in incoming water quality and plant configuration
identifying data deficiencies and organising additional data collection through appropriate sampling and testing
assessing fault reports and investigating the current operational status of sedimentation and clarification plant components
investigating current and potential chemical addition practices
planning trials to test the performance of the determined sedimentation and clarification optimisation options and compiling recommendation reports
Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the depth of knowledge demonstrated must be appropriate to the job context of the candidate.
principles that form the basis of sedimentation and clarification processes
types of sedimentation and clarification processes
re-establishing sludge blankets
polymers and weighting agents
principles of sedimentation and clarification system maintenance
system layout
pumping and valving systems
range of appropriate measuring and testing procedures
investigation procedures
risk management principles relating to sedimentation and clarification systems
chemical dosing processes
Competency will need to be demonstrated over a period of time reflecting the scope of the role and the practical requirements of the workplace, the evidence collected must relate to a number of performances assessed at different points in time and separated by further learning and practice.
Assessors must satisfy the NVR/AQTF mandatory competency requirements for assessors.