List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 | Prepare for work | 1.1 | Receive and give shift handover |
| 1.2 | Identify work requirements |
| 1.3 | Identify and control hazards |
| 1.4 | Coordinate with appropriate personnel |
| 1.5 | Check for recent work undertaken on artificial lift equipment |
| 1.6 | Note any outstanding/incomplete work |
| 1.7 | Check operational status of artificial lift equipment |
|
2 | Produce product | 2.1 | Operate lifting process in accordance with local lease and lease equipment requirements and constraints |
| 2.2 | Operate pumps, valves and other production equipment to transfer product/fluid from well to surface |
| 2.3 | Test production equipment to ensure correct operating efficiencies are maintained |
| 2.4 | Monitor operating parameters such as temperature and pressure of valves, pumps and other production equipment |
| 2.5 | Diagnose operational faults during the production phase |
| 2.6 | Take action required by procedures |
|
3 | Monitor product/volume efficiencies | 3.1 | Monitor lift equipment and its component plant items frequently and critically throughout shift using measured/indicated data and senses |
| 3.2 | Monitor fluid produced by testing and analysing product flow temperatures, pressures and fluid volumes |
| 3.3 | Evaluate the production efficiencies of the well |
| 3.4 | Describe impacts of any changes upstream and downstream |
| 3.5 | Recognise actual and developing situations which may require action |
| 3.6 | Apply operational knowledge to resolve problems |
| 3.7 | Take other actions on abnormal situations which cannot be resolved during the shift to ensure safety and the resolution of the situation |
| 3.8 | Follow through items initiated until final resolution has occurred |
|
4 | Transfer product to storage | 4.1 | Maintain records and reports showing a history of the production capacities of the well and a record of any deviations which have occurred |
| 4.2 | Communicate transfer of the product to all appropriate support groups and work groups downstream of the well |
| 4.3 | Select an appropriate medium for safe transfer of the product to the next phase in the product process |
| 4.4 | Observe and act upon all environmental conditions and legislative requirements to ensure the protection of the working environment is maintained during product transfer |
| 4.5 | Monitor transfer and take action required by procedures |
|
5 | Isolate and de-isolate plant | 5.1 | Complete any required pre-start checks |
| 5.2 | Start up/shut down lifting equipment according to the equipment type and duty in liaison with other personnel |
| 5.3 | Start up/shut down/changeover component plant items within unit according to their type and duty in liaison with other personnel |
| 5.4 | Isolate artificial lift equipment and/or any component plant item |
| 5.5 | Make safe for required work |
| 5.6 | Check lift equipment/plant item is ready to be returned to service |
| 5.7 | De-isolate and prepare lift equipment/plant item for return to service |
Evidence required to demonstrate competence in this unit must be relevant to and satisfy the requirements of the elements and performance criteria, and include the ability to:
undertake tests and use data and own senses to monitor product and equipment and maximise performance
perform pre-start checks, start-up/shutdown procedures, and isolations and de-isolations
identify early warning signs of equipment/processes needing attention or with potential problems
isolate the causes of problems and distinguish between causes of problems/alarm/fault indications, including:
lift gas variations
instrument failure/wrong reading
electrical failure
mechanical failure
operational problem
resolve non-routine problems
identify hazards and risks and apply risk control procedures.
Evidence must be provided that demonstrates knowledge of:
all items on a schematic of the production unit and functions of each
principles of operation of plant/equipment, including well bore hydraulics, reservoir formation, pumping/compressor efficiencies, production volumes and product capacities
process-specific science (physics, chemistry and biochemistry) to the level of being able to interpret the science and extract factors controlling the process and product and by-product production rate and quality
interactions between plant items/processes
systems’ operating parameters, integrity limits, product specifications and tolerances, temperature, pressure and flow
local lease and well operations requirements and constraints
basis of the process used in the well operation
impact of external factors (e.g. variations in weather and feed)
correct methods of starting, stopping, operating and controlling flow
isolation procedures
emergency shutdown procedures
function and troubleshooting of major components and their problems
routine and non-routine problems that may arise, the range of possible causes and processes to develop solutions
hierarchy of control
hazards that may arise in the job/work environment, and:
their possible causes
potential consequences
appropriate risk controls.
The unit should be assessed holistically and the judgement of competence based on a holistic assessment of the evidence.
The collection of performance evidence:
should occur over a range of situations which include typical disruptions to normal, smooth operations
will typically include a supervisor/third-party report focusing on consistent performance and problem recognition and solving. A supervisor/third-party report must be prepared by someone who has a direct, relevant, current relationship with the person being assessed and who is in a position to form a judgement on workplace performance relevant to the unit of competency
must include the use of industrial type well head and artificial lift equipment allowing preparation and operation
may use industry-based simulation for part only of the unit particularly where safety, lack of opportunity or significant cost is an issue.
Assessment should occur in operational workplace situations. Where this is not possible, or where personal safety or environmental damage are limiting factors, assessment must occur in a sufficiently rigorous simulated environment reflecting realistic operational workplace conditions. This must cover all aspects of workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills.
Assessment in a simulated environment should use evidence collected from one or more of:
walk-throughs
pilot plant operation
demonstration of skills
industry-based case studies/scenarios
‘what ifs’.
Knowledge evidence may be collected concurrently with performance evidence (provided a record is kept) or through an independent process, such as workbooks, written assessments or interviews (provided a record is kept).
Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.
Conditions for assessment must include access to all tools, equipment, materials and documentation required, including relevant workplace procedures, product and manufacturing specifications associated with this unit.
The regulatory framework will be reflected in workplace policies and procedures and is not required to be independently assessed.
Foundation skills are integral to competent performance of the unit and should not be assessed separately.
Assessors must satisfy the assessor competency requirements that are in place at the time of the assessment as set by the VET regulator.
In addition, the assessor or anyone acting in subject matter expert role in assessment must demonstrate both technical competency and currency. If the assessor cannot demonstrate technical competency and currency they must assess with a subject matter expert who does meet these requirements.
Technical competence can be demonstrated through one or more of:
relevant VET or other qualification/Statement of Attainment
appropriate workplace experience undertaking the type of work being assessed under routine and non-routine conditions
appropriate workplace experience supervising/evaluating the type of work being assessed under routine and non-routine conditions
Currency can be demonstrated through one or more of:
being currently employed undertaking the type of work being assessed
being employed by the organisation undertaking the type of work being assessed and having maintained currency in accordance with that organisation’s policies and procedures
having consulted/had contact with an organisation undertaking the type of work being assessed within the last twelve months, the consultation/contact being related to assessment
conducting on-the-job training/assessments of the type of work being assessed
being an active member of a relevant professional body and participating in activities relevant to the assessment of this type of work.