Assessor Resource

PMASUP345A
Monitor vibration

Assessment tool

Version 1.0
Issue Date: May 2024


This unit applies where specialist monitoring activities are undertaken as part of a preventive maintenance or total productive maintenance plan or program.

Work is undertaken autonomously or as part of a team environment.

Monitoring is undertaken in workshop, laboratory or in situ environment; readings are undertaken to the accuracy of monitoring equipment limitations or to site specifications where applicable.

Results are recorded/plotted to predetermined procedure and technique. All work and work procedures are undertaken to standard operating procedures and/or equipment manufacturer recommendations.

All work and work practices are undertaken to regulatory or legislative requirements.

This unit covers undertaking condition monitoring.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Employability Skills

This unit contains employability skills.



Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Assessment of this unit should include demonstrated competence on actual plant and equipment in a work environment. The unit will be assessed in as holistic a manner as is practical and may be integrated with the assessment of other relevant units of competency. Assessment will occur over a range of situations which will include a range of problems, problem causes and environments.

Simulation may be required to allow for assessment of parts of this unit. Simulation should be based on the actual problems and should include the use of case studies/scenarios and role plays.

This unit of competency requires a significant body of knowledge which will be assessed through questioning and the use of what-if scenarios.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Competence must be demonstrated in the ability to define and analyse the problem as well as deal with the stakeholders. The stakeholders should be satisfied with the solution, as well as the solution being technically sound.

Consistent performance should be demonstrated. In particular look to see that:

early warning signs of equipment/processes needing attention or with potential problems are recognised

the range of possible causes can be identified and analysed and the most likely cause determined

appropriate action is taken to ensure a timely return to full performance

obvious problems in related plant areas are recognised and an appropriate contribution made to their solution.

These aspects may be best assessed using a range of scenarios/case studies/what-ifs as the stimulus with a walk through forming part of the response. These assessment activities should include a range of problems, including new, unusual and improbable situations, which may have been generated from the past incident history of the equipment, incidents on similar equipment around the world, hazard analysis activities and similar sources.

Context of and specific resources for assessment

As a general rule assessment will require access to an operating plant over an extended period of time, or a suitable method of gathering evidence of operating competence over a range of situations. A bank of scenarios/case studies/what-ifs will be required as will a bank of questions which will be used to probe the reasoning behind the observable actions.

Method of assessment

In all plants it may be appropriate to assess this unit concurrently with relevant teamwork and communication units.

Guidance information for assessment

Assessment processes and techniques must be culturally appropriate and appropriate to the oracy, language and literacy capacity of the assessee and the work being performed.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

This describes the essential skills and knowledge and their level, required for this unit.

Required skills

recording results

preparing and submitting deviation reports.

Required knowledge

Look for evidence that confirms knowledge of:

the application of principles and methods for a variety of situations

appropriate records for a variety of situations

hazards and control measures associated with equipment monitoring, including housekeeping

use and application of personal protective equipment

safe work practices and procedures

The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.

Codes of practice/ standards

Where reference is made to industry codes of practice, and/or Australian/international standards, the latest version must be used.

Context

This unit of competency includes monitoring equipment, including:

built-in systems (software and site displays)

portable meters or devices

vibration monitors

infra-red and ultra-violet, non-destructive testing

Health, safety and environment (HSE)

All operations to which this unit applies are subject to stringent health, safety and environment requirements, which may be imposed through State or Federal legislation, and these must not be compromised at any time. Where there is an apparent conflict between Performance Criteria and HSE requirements, the HSE requirements take precedence.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Principles and methods of equipment condition monitoring are understood and applied 
Appropriate condition monitoring technique is selected to achieve required outcomes. 
Checks are undertaken correctly, safely and to standard operating procedures. 
Results are plotted and deviations from specification are reported to appropriate authority and recorded. 

Forms

Assessment Cover Sheet

PMASUP345A - Monitor vibration
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

PMASUP345A - Monitor vibration

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: