• PMBPROD235C - Use materials and process knowledge to complete work operations

Assessor Resource

PMBPROD235C
Use materials and process knowledge to complete work operations

Assessment tool

Version 1.0
Issue Date: March 2024


Application of this unit

This competency applies to operators who maintain an overview of the production process, collect and prepare materials for the production process and observe and make judgements about the end product. The key factors are the delivery of the right material to the right place at the right time and ensuring there is no contamination of the materials.

It includes:

checking job sheets for work to be done and identifying the priority in which jobs/ product will be made/completed

discussing work progress with other workers planning which jobs have the higher priority

utilising raw materials to produce products through a production process

inspecting the products of the process and identifying routine production faults

employing appropriate shutdown procedures.

This competency covers the application of materials and process knowledge to the operation of the equipment, processes, materials and end product, so that work procedures and quality requirements can be met. It applies to workers in any sector of the industry.

This competency is typically performed by all operators working either independently or as part of a work team.

This unit of competency may be designated for a stream - see the Range Statement.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Prerequisites

Prerequisites

This unit has no prerequisites.


Employability Skills

This unit contains employability skills.




Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, required skills and knowledge, the Range Statement and the Assessment Guidelines for this Training Package.

Overview of assessment

A holistic approach should be taken to the assessment.

Assessors must be satisfied that the person can consistently perform the unit as a whole, as defined by the Elements, Performance Criteria and skills and knowledge.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

It is essential that competence is demonstrated in the knowledge and skills defined in this unit. These may include the ability to:

recognise the importance of material properties and qualities

recognise the importance of process conditions

apply approved procedures

take appropriate action to resolve faults or report faults to appropriate personnel.

explain and implement emergency shutdown procedures.

Consistent performance should be demonstrated. For example, look to see that:

production standards are met consistently

upstream and downstream communication is timely

effective operating procedures and work instructions are read and interpreted correctly

problems are identified and appropriate action is taken (ie the problem is fixed or reported)

all safety procedures are followed.

Assessment method and context

Assessment will occur on industrial materials and processes and will be undertaken in a work-like environment.

Competence in this unit may be assessed:

by use of an appropriate, industrial materials and processes

in a situation allowing for the generation of evidence of the ability to respond to problems

by using a suitable simulation and/or a range of case studies/scenarios

through a combination of these techniques.

In all cases it is expected that practical assessment will be combined with targeted questioning to assess the underpinning knowledge and theoretical assessment will be combined with appropriate practical/simulation or similar assessment. Assessors need to be aware of any cultural issues that may affect responses to questions.

Assessment processes and techniques must be culturally appropriate and appropriate to the oracy, language and literacy capacity of the assessee and the work being performed.

Specific resources for assessment

This section should be read in conjunction with the Range Statement for this unit of competency. Resources required include suitable access to an operating plant or equipment that allows for appropriate and realistic simulation. A bank of case studies/scenarios and questions will also be required to the extent that they form part of the assessment method. Questioning may take place either in the workplace, or in an adjacent, quiet facility such as an office or lunchroom. No other special resources are required.

Access must be provided to appropriate learning and/or assessment support when required. Where applicable, physical resources should include equipment modified for people with disabilities.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

This describes the essential skills and knowledge and their level required for this unit.

Application of knowledge of the materials, equipment and process sufficient to recognise out-of-specification products, process problems and materials faults.

Knowledge of organisation procedures and relevant regulatory requirements along with the ability to implement them within appropriate time constraints and work standards.

Competence includes the ability for the practical completion of the job toapply and/or explain:

impact of incorrect or faulty materials

types of products made with different processes

the changes to raw materials during the process

production workflow sequences and materials demand

focus of operation of work systems and equipment

correct selection and use of equipment, materials, processes and procedures

hazards of the materials and process and appropriate hazard control procedures.

Competence also includes the ability to:

recognise the importance of material properties and qualities recognise the importance of process conditions

apply approved procedures

take appropriate action to resolve faults or report faults to appropriate personnel

explain and implement emergency shutdown procedures.

Consistent performance should be demonstrated. For example, look to see that:

production standards are met consistently

upstream and downstream communication is timely

effective operating procedures and work instructions are read and interpreted correctly

problems are identified and appropriate action is taken (ie the problem is fixed or reported)

all safety procedures are followed.

Language, literacy and numeracy requirements

This unit requires the ability to read and interpret typical product specifications, job sheets and material labels as provided to operators

Writing is required to the level of completing workplace forms.

Basic numeracy is also required, eg to determine that two 25 kg bags are needed to make up a requirement for 50 kg.

The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts.

Where reference is made to industry codes of practice, and/or Australian/international standards, the latest version must be used.

Context

This competency applies to all work environments and sectors within the plastics, rubber and cablemaking industry.

This competency unit includes the use of manual handling aids such as handcarts. It does not include the use of powered equipment/aids.

Procedures

All operations are performed in accordance with procedures.

Procedures include all relevant workplace procedures, work instructions, temporary instructions and relevant industry and government codes and standards.

Tools and equipment

This competency includes use of equipment and tools such as:

basic hand tools required for opening of material packaging

hand carts and trolleys

hoists/lifting equipment not requiring any special permits or licences rules or callipers

relevant personal protective equipment inventory and workplace records systems.

Hazards

Typical hazards include:

material spills

fumes, dusts/vapours

hazardous materials

manual handling hazards

machinery hazards.

Problems

'Respond to routine problems' means 'apply known solutions to a limited range of predictable problems'. Typical process and product problems may include:

variations in materials

contamination of materials

variations in equipment operations

product faults

equipment breakdowns.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Follow workplace documentation requirements relating to production processes. 
Identify and locate the range of materials used and their physical forms. 
Acquire necessary equipment and tools and identify appropriate work checking procedures. 
Identify and follow safety requirements for the materials and process to be employed. 
Follow procedures for the production process. 
Identify those parts of the production process where extra care and attention is required. 
Identify and apply the operating principles behind the equipment to be used. 
Inspect products for compliance with quality specifications. 
Identify products in terms of end purpose and relationship to workplace production output and economic value. 
Relate features of products to the production process. 
Follow the correct workplace procedures and safety precautions for the storage of equipment, materials and products. 
Identify and separate incompatible materials in accordance with workplace procedures and practices. 
Ensure equipment is cleaned prior to return to storage. 
Dispose of waste materials through approved means or product recycling. 
Identify the causes of production faults and take appropriate restorative or reporting action. 
Establish the basis for product faults and report or address (as appropriate) potential causes due to inappropriate production methods and materials quality. 
Differentiate between routine and emergency shutdown situations and procedures. 
Demonstrate the procedures to be followed in an emergency shutdown of the process and the alert procedures that accompany that process. 
Follow the appropriate procedures for routine shutdowns for breaks and other routine short term discontinuances. 
Notify appropriate personnel of shutdowns and complete any workplace documentation. 

Forms

Assessment Cover Sheet

PMBPROD235C - Use materials and process knowledge to complete work operations
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

PMBPROD235C - Use materials and process knowledge to complete work operations

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: