The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, required skills and knowledge, the Range Statement and the Assessment Guidelines for this Training Package.

Overview of assessment

A holistic approach should be taken to the assessment.

Assessors must be satisfied that the person can consistently perform the unit as a whole, as defined by the Elements, Performance Criteria and skills and knowledge.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

It is essential that competence is demonstrated in the knowledge and skills defined in this unit. These may include the ability to:

apply the required skills and knowledge to operate demoulding equipment

apply approved procedures.

Consistent performance should be demonstrated. For example, look to see that:

demoulding standards are met consistently

all safety procedures are followed.

Assessment method and context

Assessment will occur using industrial demoulding equipment and will be undertaken in a work-like environment.

Competence in this unit may be assessed:

by use of appropriate, industrial demoulding equipment requiring demonstration of operation and emergency stop procedures

in a situation allowing for the generation of evidence of the ability to respond to problems

by using a suitable simulation and/or a range of case studies/scenarios

through a combination of these techniques.

In all cases it is expected that practical assessment will be combined with targeted questioning to assess the underpinning knowledge and theoretical assessment will be combined with appropriate practical/simulation or similar assessment. Assessors need to be aware of any cultural issues that may affect responses to questions.

Assessment processes and techniques must be culturally appropriate and appropriate to the oracy, language and literacy capacity of the assessee and the work being performed.

Specific resources for assessment

This section should be read in conjunction with the Range Statement for this unit of competency. Resources required include suitable access to an operating plant or equipment that allows for appropriate and realistic simulation. A bank of case studies/scenarios and questions will also be required to the extent that they form part of the assessment method. Questioning may take place either in the workplace, or in an adjacent, quiet facility such as an office or lunchroom. No other special resources are required.

Access must be provided to appropriate learning and/or assessment support when required. Where applicable, physical resources should include equipment modified for people with disabilities.

This describes the essential skills and knowledge and their level required for this unit.

Application of an operational knowledge of the materials, equipment and process sufficient to recognise out-of-specification products, process problems and materials faults. For example, demoulding temperature is dependent on the type of resin used for moulding of the product. Therefore, care needs to be taken to ensure the resin used is known and the correct temperature is chosen for demoulding.

Knowledge of organization procedures and relevant regulatory requirements along with the ability to implement them within appropriate time constraints and work standards.

Application of the knowledge of managing risks using the hierarchy of controls applied to the demoulding process. Application of approved hazard control and safety procedures and the use of PPE in relation to handling materials, equipment operation and cleanup.

Knowledge of and skills in the operation of demoulding equipment and main components sufficient for consistent production of quality products including:

production workflow sequences and materials demand

the potential effect of variations on demoulding products such as temperature

accurately monitoring equipment operation and product quality

waste management and knowing the importance of reusing non-conforming products wherever possible

correct selection and use of equipment, materials, processes and procedures

identify factors which may affect product quality or production output and appropriate remedies.

Competence includes the ability to:

plan own work, including predicting consequences and identifying improvements

identify when the operator is able to rectify faults, when assistance is required and who is the appropriate source for assistance

identify and describe role and role of others involved directly in the process.

Language, literacy and numeracy requirements

This unit requires the ability to read and interpret typical product specifications, job sheets, procedures, material labels and safety information as provided to operators.

Writing is required to the level of completing workplace forms.

Basic numeracy is required, eg to determine that two 25 kg bags are needed to make up a requirement for 50 kg.

The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts.

Where reference is made to industry codes of practice, and/or Australian/international standards, the latest version must be used.

Context

This competency applies to all work environments and sectors within rotational moulding, polyurethane, composites and thermoforming where moulds are used. It includes the operation of all relevant additional equipment where that equipment is integral to the process.

Procedures

All operations are performed in accordance with procedures.

Procedures include all relevant workplace procedures, work instructions, temporary instructions and relevant industry and government codes and standards.

Tools and equipment

This competency includes use of equipment and tools such as:

use of handling aid (eg handcarts, hoists, jigs and gantries)

pedestrian forklift

hand tools (eg applicators, dispensers, measuring devices, cutters and cleaning utensils)

relevant personal protective equipment.

Hazards

Typical hazards include:

handling moulds/products not cooled properly

manual handling

noise

light

energy sources

humidity

air temperatures

radiant heat

stationary and moving machinery, parts or components.

Problems

Respond to/rectify 'non-routine problems' means 'apply known solutions to a variety of predictable problems'. Typical process problems may include:

badly prepared mould

leakage/spillage of raw materials

incorrect quantity of materials

contaminated materials/additives

equipment faults

mould damage.

Typical product problems may include:

malformed product

damage of product on removal

cracking

warping

poor surface finish.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist