Assessor Resource

PMBPROD377A
Splice fabric ply conveyor belts

Assessment tool

Version 1.0
Issue Date: March 2024


Application of this unit

This competency applies to advanced operators who splice multiple ply textile reinforced conveyor belts (fabric ply belts). The key factors are the ability to safely access the belt, complete the splice and put safely back into service. This competency is typically performed by advanced operators working either independently or as part of a work team.

The operator will:

plan the splicing job

select and arrange all equipment and materials

prepare the belt for splicing

splice the belt and cure the join on site

inspect the splice and either approve the work or re-do the splice

identify any hazards and take appropriate action

clean up site, dispose of scrap and recycle materials where possible

complete logs and reports.

This competency unit does not cover splicing of steel cord belts (refer to PMAPROD374B ) or solid woven conveyor belts (refer to PMBPROD377A ).

Note that this competency unit covers splicing carried out in a workshop or other off-site facility. If the work involves on site work, then this competency should be considered in conjunction with MSAOPS363A Organise on site work.

This competency covers splicing of multiple ply textile reinforced conveyor belts (fabric ply belts). It covers splicing of new or existing conveyor belts. The competency applies on-site or in a repair facility.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Prerequisites

Prerequisites

This unit of competency has the prerequisite of PMBPROD265B Operate portable vulcanising equipment.


Employability Skills

The required outcomes described in this unit contain applicable Employability Skills. The Employability Skills Summary of the qualification(s) in which this unit is packaged will assist in identifying Employability Skill requirements.




Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, the range statement and the assessment guidelines for this training package.

Overview of assessment

A holistic approach should be taken to the assessment.

Assessors must be satisfied that the person can consistently perform the unit as a whole, as defined by the Elements, Performance Criteria and skills and knowledge.

Where the assessee does not currently possess evidence of competency in PMBPROD265B Operate portable vulcanising equipment, it may be co-assessed with this unit.

This unit may also be co-assessed with MSAOPS363A Organise on site work.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

It is essential that competence is demonstrated in the knowledge and skills defined in this unit. These may include the ability to:

identify critical materials properties and conveyor operating characteristics in relation to the condition of the belt

plan own work process within organisational procedures and explain the reasons for the steps in the process

take appropriate action to observe equipment, materials and products for out of specification results, make repairs and identify problems to be reported.

Consistent performance should be demonstrated. For example, look to see that:

production quality and output standards are met consistently

problems are anticipated from process observations

problems are efficiently resolved

the repair runs consistently and smoothly.

Assessment method and context

Assessment will occur on an industrial belt and will be undertaken in a work-like environment.

Competence in this unit may be assessed:

on a processing plant, allowing for operation under all normal and a range of abnormal conditions

in a workshop or conveyor manufacturing facility

in a situation allowing for the generation of evidence of the ability to recognise, anticipate and respond to problems

by using a suitable simulation and/or a range of case studies/scenarios

through a combination of these techniques.

In all cases it is expected that practical assessment will be combined with targeted questioning to assess the underpinning knowledge and theoretical assessment will be combined with appropriate practical/simulation or similar assessment. Assessors need to be aware of any cultural issues that may affect responses to questions.

Assessment processes and techniques must be culturally appropriate and appropriate to the oracy, language and literacy capacity of the assessee and the work being performed.

Specific resources for assessment

This section should be read in conjunction with the Range Statement for this unit of competency. Resources required include suitable access to an operating plant or equipment that allows for appropriate and realistic simulation. A bank of case studies/scenarios and questions will also be required to the extent that they form part of the assessment method. Questioning may take place either in the workplace, or in an adjacent, quiet facility such as an office or lunchroom. No other special resources are required.

Access must be provided to appropriate learning and/or assessment support when required. Where applicable, physical resources should include equipment modified for people with disabilities.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

This describes the essential skills and knowledge and their level required for this unit.

Application of knowledge of the materials, equipment and process sufficient to recognise material and equipment conditions which may lead to out of specification production. For example, consumables for use in the splicing operation must be checked for compatibility with the belt and that materials are within recommended shelf life.

Knowledge of organization procedures and relevant regulatory requirements along with the ability to implement them within appropriate time constraints and work standards.

Application of the knowledge of managing risks using the hierarchy of controls applied to fabric ply belt splicing. Application of approved hazard control, safety procedures and the use of PPE in relation to handling materials, equipment operation and cleanup.

Competence includes the ability, for the practical completion of the job, to apply and/or explain:

impact of incorrect or faulty joining processes

production workflow sequences and inherent hazards with conveyors

stresses and tensions on working belts and the common failure causes

correct selection and use of equipment, materials, processes and procedures

size, shape and orientation of steps to form the overlap multi ply splice

resultant tensile strength of spliced fabric belt

products, materials and material characteristics for the splice and cover

effects of temperature and time on the curing process

changes in conveyor and joining materials during the joining process.

Competence also includes the ability to:

plan own work, including predicting consequences and identifying improvements

identify factors which may affect product quality or production output and appropriate remedies

identify when the operator is able to rectify faults and when assistance is required.

Language, literacy and numeracy requirements

This unit requires the ability to read and interpret typical conveyor belt and system specifications, job sheets and material labels as provided to operators.

Writing is required to the level of completing workplace forms and job reports.

Numeracy is also required, eg to ensure accuracy of measurements and integrity of the splice.

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts.

Where reference is made to industry codes of practice and/or Australian/international standards, the latest version must be used.

Context

This competency applies to fabric ply conveyor belt splicing typically within the minerals industry. However, it includes all users of fabric ply conveyor belts.

It includes the operation of all relevant additional equipment where that equipment is integral to the belt splicing process.

Procedures

All operations are performed in accordance with procedures.

Procedures include all relevant workplace procedures, manufacturer specifications and procedures, work instructions, temporary instructions and relevant industry and government codes and standards.

Tools and equipment

This competency includes use of equipment and tools such as:

manual handling aids

hand winches

portable power generators and vulcanising equipment

knives and other cutting instruments

portable hoists/lifting equipment not requiring any special permits or licences

hand tools (such as spanners, wrenches, hammers)

power operated hand tools (such as drills, cutting disks, sanders)

relevant personal protective equipment.

Hazards

Typical hazards include:

ragged edges and exposed fabric

fabric material

dust and debris from the belt and material being transported

hazardous materials arising from the splicing process

manual handling hazards

knife, cutting and grinding disk hazards

heat and pressure.

Problems

'Anticipate and solve problems' means resolve a wide range of routine and non-routine problems, using product and process knowledge to develop solutions to problems which do not have a known solution/a solution recorded in the procedures.

Typical process and product problems may include:

weight of the belting to be moved and repaired

variations in materials

required finish on the cover at the splice

contamination of materials

lack of accessibility

equipment malfunctions

tooling problems

variations in materials and/or contamination of materials.

Variables

Key variables to be monitored include:

belt condition

belt location

degree and nature of damage to belt if applicable

weight of the belt

forces acting on the conveyor belt

environmental conditions

lock-out of equipment

tensioning systems

gradient of belt

belt strength rating.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Review belt specifications and work order documentation. 
Identify hazards and risk controls. 
Plan work including sequences, times and process stages. 
Plan to minimise downtime, economically use materials and meet splice quality specifications. 
Assemble equipment, tools and materials required, checking them for condition, quality and compliance tags. 
Isolate equipment and conveyor systems as required. 
Restrain belt or belt ends to ensure movement does not occur during splice. 
Strip or remove belt cover as required. 
Cut belt ends to appropriate steps or patterns. 
Prepare belt surfaces for bonding. 
Lay up splice using appropriate materials. 
Check that splice meets quality requirements prior to curing. 
Vulcanise or otherwise cure the splice according to procedures, as applicable. 
Conduct post-cure quality checks on the finished splice. 
Carry out subsequent repair in event of splice failure or notify relevant personnel. 
Inform customer when belt is ready for use, or prepare belt for storage or delivery. 
Clean, inspect and store tools and equipment used. 
Tag unserviceable tools and equipment, identify faults and inform relevant personnel. 
Clean work area and return to approved condition. 
Dispose of waste or recycle according to procedures. 
Complete appropriate workplace documentation. 
Recognise a problem or a potential problem. 
Determine problems needing priority action. 
Refer problems outside area of responsibility to appropriate person, with possible causes. 
Seek information and assistance as required to solve problems. 
Solve problems within area of responsibility. 
Follow through items initiated until final resolution has occurred. 

Forms

Assessment Cover Sheet

PMBPROD377A - Splice fabric ply conveyor belts
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

PMBPROD377A - Splice fabric ply conveyor belts

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: