Assessor Resource

PUASAR023
Participate in a first response urban search and rescue Category 1

Assessment tool

Version 1.0
Issue Date: May 2024


This unit of competency applies to the role of a USAR Category 1 first responder and involves the skills and knowledge required to provide safe and effective rescue support at a first response Urban Search and Rescue (USAR) incident.

Participating in an urban search and rescue involves assisting with the rescue and removal of surface casualties (lightly trapped) and/or deceased victims, applying basic search techniques and following safe work practices related to Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) requirements.

It also includes the application of specialist equipment and techniques used at USAR incidents and the ability to work as a team member. A person performing this role will operate, under direct supervision, as a member of a USAR first responder rescue team.

No licensing, legislative or certification requirements apply to this unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the Companion Volume Implementation Guide.

casualties must include at least one of the following

partially and/or lightly trapped casualties able to be rescued using available rescue equipment

surface and subsurface casualties trapped and not able to be rescued using available rescue equipment

surface casualties not trapped within the structure

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Rescue techniques and resources are used to remove surface or partially trapped casualties, in accordance with organisational procedures 
Evidence of casualty identity is collected and processed, in accordance with organisational procedures 
Actions are taken to preserve the incident scene, where possible, for evidentiary purposes 
Operation and task information is obtained, and clarification is sought at briefing 
 
 
 
Worksite scene reconnaissance and size up is conducted and the results are reported to supervisor and other rescue team members 
 
 
 
 
 
 
 
Intelligence on location of surface casualties within a collapsed structure is collected, analysed and reported, in accordance with organisational policies and procedures 
 
 
Rescue techniques and equipment are employed to stabilise and make incident site safe 
Rescue techniques and resources are used to remove surface or partially trapped casualties, in accordance with organisational procedures 
 
 
Equipment is recovered, cleaned and serviced, in accordance with organisational procedures and manufacturers' guidelines 
 
 
 

Forms

Assessment Cover Sheet

PUASAR023 - Participate in a first response urban search and rescue Category 1
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

PUASAR023 - Participate in a first response urban search and rescue Category 1

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: