List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
1. Plan and prepare to install pre-cast concrete bridge decks | 1.1 Access, interpret and apply documentation to install pre-cast concrete bridge decks and ensure the work activity is compliant 1.2 Obtain, interpret, clarify and confirm work instructions before proceeding 1.3 Confirm and apply environmental protection and safety requirements 1.4 Obtain, interpret and implement traffic management signage 1.5 Select and check for faults plant, tools and equipment to carry out tasks 1.6 Identify, address and report hazards, risks and environmental issues 1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency |
2. Install bearings | 2.1 Determine bearing types and position 2.2 Check bearing dimensions and material for quality 2.3 Install bearings 2.4 Identify locating brackets/bolts and install in preparation for placement of girders |
3. Install concrete bridge deck | 3.1 Prepare deck components for grouting prior to placement 3.2 Place deck components 3.3 Carry out and complete pre-fabricated concrete decking grouting 3.4 Insert and tension pre-fabricated concrete decking transverse stressing bar 3.5 Grout transverse stressing bar 3.6 Grout anchor bolts 3.7 Place and specify deck joints of pre-fabricated decking and scuppers |
4. Fix bridge fittings | 4.1 Fit posts and bridge rails 4.2 Assemble and install pre-fabricated stairs |
5. Clean up | 5.1 Clear work area and dispose of or recycle materials 5.2 Clean, check, maintain and store plant, tools and equipment |
Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:
locates and applies applicable legislation, documentation, policies and procedures
works effectively with others to undertake and complete the installation of pre-cast concrete bridge decks that meets all of the required outcomes including:
communicating clearly and concisely with others to receive and clarify work instructions
using a range of communication techniques and systems such as signage to advise others of work activity and exclusion zones
demonstrates completion of installing pre-cast concrete bridge decks that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:
installing bearings and brackets/bolts in preparation for placement of girders
installing pre-cast concrete deck units including installation of transverse stressing bars and bearings on a multi-span bridge with a minimum length of twenty (20) metres to specifications
assembling and installing pre-fabricated stairs
The candidate must demonstrate knowledge of the following in applying the install pre-cast concrete bridge decks through:
applying legislative, organisational and site requirements and procedures for:
risk assessment and management
site and equipment safety requirements
bridge construction and sequencing
pre-cast concrete bridge decks and installation
bearing types and installation
safe lifting techniques
safe working procedures, working at heights and over water
project quality requirements
civil construction terminology
interpreting engineering drawings
equipment types, characteristics, technical capabilities and limitations
site isolation and traffic control responsibilities and authorities
safety data sheets and materials handling methods
JSA/JSEA/safe work method statements
An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,
this unit must be assessed in the context of this sector’s work environment; and,
this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,
assessment may be conducted in conjunction with the assessment of other Units of Competency; and,
assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,
assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,
where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,
assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:
Industry sector | AQF** Level | Required assessor or Industry subject matter expert experience |
Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction | 1 | 1 Year |
2 | 2 Years |
Drilling, Coal Mining and Extractive (Quarrying) | 3-6 | 3 Years |
Metalliferous Mining and Civil Construction | 3-6 | 5 Years |
Other sectors | Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation. |
*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.
**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level