List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
1. Plan and prepare for self-propelled aggregate spreader operations | 1.1 Access, interpret and apply self-propelled aggregate spreader operations documentation and ensure the work activity is compliant 1.2 Obtain, read, interpret, clarify and confirm work requirements 1.3 Identify and address potential risks, hazards and environmental issues, and implement control measures 1.4 Select and wear personal protective equipment appropriate for work activities 1.5 Obtain, interpret and implement traffic management signage requirements 1.6 Select and check for faults plant, tools and equipment to carry out tasks 1.7 Confirm and apply environmental protection and safety requirements 1.8 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency |
2. Operate aggregate spreader | 2.1 Carry out start-up, park-up procedures Drive and operate equipment,, monitor gauges and systems 2.2 Record aggregate stone size and set equipment accordingly 2.3 Guide truck to spreader and engage securely prior to taking on load 2.4 Check calibration and adjust the machine as required 2.5 Select and modify spreading technique to meet changing work conditions 2.6 Monitor spreader speed and ensure aggregate is spread at specified rate |
3. Perform hand spreading and spotting duties | 3.1 Check uniformity of run and correct as required 3.2 Hand spread materials to specifications |
4. Carry out operator maintenance | 4.1 Prepare machine for maintenance 4.2 Conduct inspection and fault finding 4.3 Carry out scheduled maintenance tasks 4.4 Process written maintenance records |
5. Relocate aggregate spreader | 5.1 Prepare aggregate spreader for relocation 5.2 Drive aggregate spreader safely on highways and construction sites, observing highway code and local safety requirements |
6. Clean up | 6.1 Clear work area and dispose of or recycle materials 6.2 Clean, check, maintain and store plant, tools and equipment 6.3 Carry out housekeeping requirements |
Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:
locates and applies applicable legislation, documentation, policies and procedures
implements the requirements, procedures and techniques for the safe, effective and efficient completion of self-propelled aggregate spreader operations including:
select and use relevant tools and equipment safely
identify and report on hazards related to the worksite and work activity
works effectively with others to undertake and complete self-propelled aggregate spreader operations that meets all of the required outcomes including:
organising work activities to meet all task requirements
communicating clearly and concisely with others to receive and clarify work instructions
using a range of communication techniques and systems such as signage to advise others of work activity and exclusion zone
demonstrates completion of conducting self-propelled aggregate spreader operations that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:
applying aggregate to sprayed binder which has been distributed to surfaces that are to include but not be limited to granular materials, sprayed sealing, asphalt and may include concrete
recording aggregate stone size and setting equipment accordingly
selecting and modifying spreading technique to meet changing work conditions
monitoring spreader speed and ensuring aggregate is spread at specified rate
The candidate must demonstrate knowledge in conducting self-propelled aggregate spreader operations through:
applying legislative, organisational and site requirements and procedures for:
site and equipment safety requirements
aggregate spreading
housekeeping
safe operating techniques in all terrain
communicating effectively to receive and clarify work instructions
complying with the site and equipment safety requirements
understanding the sprayed sealing operations
understanding the equipment types, characteristics, technical capabilities and limitations
complying with the operational, maintenance and basic diagnostic procedures
complying with the site isolation and traffic control responsibilities and authorities
understanding the processes for the calculation of material requirements, application rates and travel speed
complying with safety data sheets and materials handling methods
applying project quality requirements
preparing and/or implementing JSAs/JSEA/safe work method statements
An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,
this unit must be assessed in the context of this sector’s work environment; and,
this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,
assessment may be conducted in conjunction with the assessment of other Units of Competency; and,
assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,
assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,
where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,
assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:
Industry sector | AQF** Level | Required assessor or Industry subject matter expert experience |
Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction | 1 | 1 Year |
2 | 2 Years |
Drilling, Coal Mining and Extractive (Quarrying) | 3-6 | 3 Years |
Metalliferous Mining and Civil Construction | 3-6 | 5 Years |
Other sectors | Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation. |
*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.
**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level