List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
1. Plan and prepare for concrete work | 1.1 Access, interpret and apply concrete work documentation, and ensure the work activity is compliant 1.2 Obtain, read, interpret, clarify and confirm work requirements 1.3 Identify and address potential risks, hazards and environmental issues, and implement control measures 1.4 Select and wear personal protective equipment appropriate for work activities 1.5 Identify, obtain and implement traffic signage requirements 1.6 Select, and check for faults, equipment and/or attachments for work activities 1.7 Identify environmental protection requirements 1.8 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency |
2. Select materials | 2.1 Determine location requirements of steel reinforcement and formwork 2.2 Confirm reinforcement requirements 2.3 Select formwork components/materials 2.4 Select and use fixing/fasteners |
3. Set out for concrete work | 3.1 Set string lines accurately from existing pegs 3.2 Check grades and ensure correct fall 3.3 Identify services, protect and prevent damage |
4. Construct and fit reinforcement | 4.1 Cut and bend reinforcing fabric and bars 4.2 Tie/fix fabric and bars to configuration 4.3 Attach stiffening rods to panels as required to facilitate handling 4.4 Locate reinforcement material in formwork, and place it on bar chairs/spacers, and confirm clearance from formwork 4.5 Locate and secure cast-ins |
5. Erect formwork | 5.1 Clear work area and prepare surface for erection of formwork 5.2 Set out formwork 5.3 Assemble/erect and brace formwork 5.4 Position expansion joints to specification and to relevant Australian standard 5.5 Position dowel joints 5.6 Remove debris, sawdust and other waste material from formwork 5.7 Apply release agent to manufacturer’s specifications |
6. Carry out concrete work | 6.1 Place concrete to specified levels and grades and avoid segregation 6.2 Compact concrete using immersion vibrator or other specified method 6.3 Screed, finish and apply curing process to concrete 6.4 Cover and protect concrete surface |
7. Strip formwork | 7.1 Remove edge boxing and braces sequentially 7.2 Denail, clean, store/stack timber components 7.3 Clean, oil, store/stack steel components 7.4 Discard damaged formwork components after stripping 7.5 Clean screens before movement |
8. Conduct housekeeping activities | 8.1 Clear work area and dispose of or recycle materials 8.2 Clean and maintain condition of equipment, ensure suitability for use, and address/report issues 8.3 Manage/report hazards, and maintain a safe working environment 8.4 Process written records |
Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:
locates and applies applicable documentation, policies and procedures
implements the requirements, procedures and techniques for the safe, effective and efficient completion of concrete work including:
selecting and using relevant tools/equipment
carrying out steel reinforcement
completing formwork
communicating effectively to confirm work requirements/drawings/specifications
works effectively with others to undertake and complete concrete work that meets all of the required outcomes including:
using a range of communications techniques and equipment to convey information to others
complying with written and verbal reporting requirements and procedures
demonstrates completion of carrying out concrete work that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:
set up string lines, framework and reinforcements
position expansion and dowel joints
place concrete according to job specifications
compact concrete
screed/finish concrete surface
The candidate must demonstrate knowledge of the following when carrying out concrete work:
accessing, interpreting and applying the organisation and site requirements and procedures for:
using JSAs/JSEA/safe work methods
achieving project quality outcomes
identifying and reporting on hazards related to the worksite and work activity
applying materials handling methods and using safety data sheets
organising work activities
using relevant tools and equipment safely
identifying equipment types, characteristics, technical capabilities and limitations
identifying site isolation and traffic control responsibilities and authorities
identifying concrete characteristics and properties
using concreting principles
using structural technology
using civil construction terminology
completing housekeeping activities
An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,
this unit is best assessed in the context of this sector’s work environment;
where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of this sector’s workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills; and,
this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,
assessment may be conducted in conjunction with the assessment of other Units of Competency; and,
assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,
assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,
where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,
assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:
Industry sector | AQF** Level | Required assessor or Industry subject matter expert experience |
Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction | 1 | 1 Year |
2 | 2 Years |
Drilling, Coal Mining and Extractive (Quarrying) | 3-6 | 3 Years |
Metalliferous Mining and Civil Construction | 3-6 | 5 Years |
Other sectors | Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation. |
*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.
**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level