Assessor Resource

RIICRC320
Seal concrete pavements

Assessment tool

Version 1.0
Issue Date: March 2024


This unit is appropriate for those working in an operational role at worksites within:

Civil construction

This unit covers the sealing of concrete pavements in the civil construction industry. It includes planning and preparing and completing concrete sealing operations on pavements. Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories and industry sectors. Relevant information must be sourced prior to application of the unit.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Prerequisites

Not applicable.


Employability Skills

This unit contains employability skills




Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competency in this unit must be relevant to worksite operations and satisfy all of the requirements of the performance criteria, required skills and knowledge and the range statement of this unit and include evidence of the following:

knowledge of the requirements, procedures and instructions for the sealing of concrete

implementation of requirements, procedures and techniques for the safe, effective and efficient sealing of concrete

working with others to undertake the sealing of concrete that meets all of the required outcomes

consistent timely sealing of concrete that safely, effectively and efficiently meets the required outcomes

conduct sealing of concrete pavements by:

application and instillation of sealer material and backer rods

Context of and specific resources for assessment

This unit must be assessed in the context of the work environment. Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of workplace performance, including task skills, task management skills, contingency management skills and job role environment skills.

The assessment environment should not disadvantage the participant. For example, language, literacy and numeracy demands of assessment should not be greater than those required on the job.

Customisation of assessment and delivery environment to sensitively accommodate cultural diversity.

Aboriginal people and other people from a non Englishspeaking background may have second language issues.

Assessment of this competency requires typical resources normally used in the work environment. Selection and use of resources for particular worksites may differ due to site circumstances.

Where applicable, physical resources should include equipment modified for people with disabilities.

Access must be provided to appropriate learning and/or assessment support when required.

Method of assessment

This unit may be assessed in a holistic way with other units of competency. The assessment strategy for this unit must verify required knowledge and skill and practical application using more than one of the following assessment methods:

seal 50lm of joint in accordance with specification

written and/or oral assessment of the candidate’s required knowledge

observed, documented and/or first hand testimonial evidence of the candidate’s:

implementation of appropriate requirement, procedures and techniques for the safe, effective and efficient achievement of required outcomes

consistently achieving the required outcomes

first hand testimonial evidence of the candidate’s:

working with others to undertake the sealing of concrete pavements

Guidance information for assessment

Consult the SkillsDMC User Guide for further information on assessment including access and equity issues.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

Specific skills are required to achieve the performance criteria in this unit, particularly for the application in the various circumstances in which this unit may be applied. This includes the ability to carry out the following as required to seal concrete pavements:

apply legislative, organisation and site requirements and procedures

speak clearly and directly, listening carefully to instructions and information

interpret and understand the information required for the preparation and application of hand and power tools, including work instructions, quality assurance procedures, manufacturer’s instructions, materials safety data sheets and equipment

apply teamwork to a range of situations, particularly in a safety context

solve problems particularly in teams and in dealing practically with safety issues

show initiative in adapting to changing work conditions or contexts particularly when working across a variety of work placements

manage time, particularly in organising priorities and planning work including the scheduling and use of equipment, materials and tools to avoid back tracking and re work

take responsibility for self organisation of work priorities

use technology related to determining requirements, the planning and application of hand and power tools, including the use of calculations, mechanical equipment and the reporting/recording of results

Required knowledge

Specific knowledge is required to achieve the Performance Criteria of this unit, particularly its application in a variety of circumstances in which the unit may be used. This includes knowledge of the following, as required to seal concrete pavements:

site and equipment safety requirements

hand tools and their application

portable power tools and their application

power sources

materials commonly used in the industry

equipment types, characteristics, technical capabilities and limitations

operational, maintenance and basic diagnostic procedures

materials safety data sheets (MSDS) and materials handling methods

project quality requirements

industry and worksite terminology

electrical and compressed air safety

JSA’s/safe work method statement

Relevant compliance documentation

may include:

legislative, organisation and site requirements and procedures

manufacturer’s guidelines and specifications

Australian standards

code of practice

Employment and workplace relations legislation

Equal Employment Opportunity and Disability Discrimination legislation

Work instructions may include:

verbal or written and graphical instructions, signage, work schedules/plans/specifications, work bulletins, charts and hand drawings, memos, materials safety data sheets (MSDS) and diagrams or sketches

plans and specifications

quality requirements, including: dimensions and tolerances, standards of work and material standards

safe work procedures or equivalent related to using hand and power tools

Safety requirements may include:

protective clothing and equipment

use of tools and equipment

workplace environment and safety

handling of materials

use of fire fighting equipment

use of First Aid equipment

hazard control

hazardous materials and substances

personal protective equipment

emergency procedures related to equipment operation which may include:

emergency shutdown and stopping

extinguishing equipment fires

organisational first aid requirements and

evacuation

Environmental protection requirements may include:

organisational/project environmental management plan

waste management

water quality protection

noise

vibration

dust and

clean-up management

Hand tools are to include but not be limited to:

blowout pipe

spline roller

brooms

measuring tape

ruler/depth gauge

Checking tools is to include:

checking of electrical safety/inspection tag for currency

equipment defect identification

assessment of conditions and hazards and determination of work requirements

Materials are:

backer rods

joint sealant

Power tools may include those powered by but not limited to:

240 volt electricity (circular saw, mitre saw, drill, grinder, impact hammer)

pneumatic (wrench, grinder, jackhammer, screwdriver)

battery driven (drill, grinder, circular saw, sander, impact hammer) and

hydraulics (portapower and attachments, jacking equipment, shoring systems)

Equipment is to include:

power leads and

safety switches and

air hoses

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Access, interpret and apply compliance documentation relevant to the use of hand and power tools 
Obtain, confirm and apply work instructions for the allotted task 
Obtain, confirm and apply safety requirements from the site safety plan and organisational policies and procedures relevant to the allotted task 
Identify, confirm and apply environmental protection requirements for the allotted task from the project environmental management plan 
Select hand tools consistent with needs of the job 
Check tools for serviceability and safety, and report faults 
Clamp or fix materials in position 
Use hand tools safely and effectively according to their intended use 
Locate hand tools safely when not in immediate use 
Select power tools and equipment consistent with needs of job and in accordance with standard work practice, and report any faults 
Check tools for serviceability and safety, and report faults 
Visually check power leads/hoses for serviceability/safety in accordance with the site safety plan 
Clear route for safe placement of leads/hoses of identified hazards 
Run electrical power leads to power supply so they are clear of traffic and covered where possible 
Connect electric power leads to the power board or direct to power tool 
Run air hoses out to the compressed air supply and cover where potential trip hazards exist 
Connect hose to power tool and air supply 
Use power tools safely and effectively in application processes 
Locate power tools safely when not in use 
Clean out and prepare for joint sealing 
Complete joint sealing records 
Clear work area and dispose of or recycle materials in accordance with project environmental management plan 
Clean, check, maintain and store machinery, tools and equipment in accordance with manufacturer’s recommendations and standard work practices 

Forms

Assessment Cover Sheet

RIICRC320 - Seal concrete pavements
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

RIICRC320 - Seal concrete pavements

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: