Assessor Resource

RIICRM207D
Install raised pavement markers

Assessment tool

Version 1.0
Issue Date: March 2024


This unit describes a participant’s skills and knowledge required to install raised pavement markers in Civil Construction.

This unit is appropriate for those working in operational roles.

Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)



Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

1. Plan and prepare to install raised pavement markers

1.1 Access, interpret and apply raised pavement markers documentation and ensure the work activity is compliant

1.2 Obtain, interpret, clarify and confirm work instructions before proceeding

1.3 Identify and implement traffic management signage requirements

1.4 Select and check for faults plant, tools and equipment to carry out tasks

1.5 Identify, address and report hazards, risks and environmental issues

1.6 Select and wear correct personal protective equipment appropriate for work activities

1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency

2. Prepare surface and set out

2.1 Clear area of dirt, debris and other contaminants

2.2 Identify location for raised pavement markers and position to control point

2.3 Remove defective raised pavement markers where required

2.4 Prime marked location for raised pavement markers in readiness

3. Prepare marking materials

3.1 Mix and prepare marking material

3.2 Adjust additives and consistency of material to allow easy application and appropriate curing time

3.3 Transfer marking material carefully to applicator container

4. Apply raised pavement markers

4.1 Use equipment with the correct movement and pressure

4.2 Apply material

4.3 Identify and correct defects with the material

4.4 Maintain equipment

5. Measure work

5.1 Assess, record and report work outcomes

5.2 Calculate and quantify amount of raised pavement markers completed

5.3 Identify and report non-conforming work

6. Clean up

6.1 Clear work area and dispose of or recycle materials

6.2 Clean, check, maintain and store plant, tools and equipment

6.3 Carry out housekeeping activities

Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:

locates and applies applicable documentation, policies and procedures

works effectively with others to undertake and complete the installation of raised pavement markers that meets all of the required outcomes including:

communicating clearly and concisely with others to receive and clarify work instructions

using a range of communication techniques and systems such as signage to advise others of work activity and exclusion zone

demonstrates completion of the installation of raised pavement markers that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:

selecting and inspecting for faults in plant, tools and equipment

identifying, reporting and recording hazards, risks and environmental issues

removing dirt, debris and contaminants from the area

setting out the location for line marking with control points

preparing the marking materials by mixing, adjusting and curing appropriately

installation of two hundred (200) permanent reflective or non-reflective raised pavement markers on the various line configurations

measuring, calculating and quantifying amount of raised pavement markers

The candidate must demonstrate knowledge in installing raised pavement markers through:

applying organisation and site requirements and procedures for:

work, health and safety

equipment operation

operational, maintenance and basic diagnostics

JSAs/safe work method statements

housekeeping

identifying and applying road markings

identifying equipment types, characteristics, technical capabilities and limitations

complying with project quality requirements

identifying and using civil construction terminology

complying with site isolation and traffic control responsibilities and authorities

identifying road marking materials

applying raised pavement marking activities and techniques

complying with safety data sheets and materials handling methods

applying processes for the calculation of marker requirements, placement rates and travel speed

being prepared for fire/accident/emergency

An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,

this unit must be assessed in the context of this sector’s work environment; and,

this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,

assessment may be conducted in conjunction with the assessment of other Units of Competency; and,

assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,

assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,

where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,

assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:

Industry sector

AQF** Level

Required assessor or Industry subject matter expert experience

Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction

1

1 Year

2

2 Years

Drilling, Coal Mining and Extractive (Quarrying)

3-6

3 Years

Metalliferous Mining and Civil Construction

3-6

5 Years

Other sectors

Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation.

*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.

**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

1. Plan and prepare to install raised pavement markers

1.1 Access, interpret and apply raised pavement markers documentation and ensure the work activity is compliant

1.2 Obtain, interpret, clarify and confirm work instructions before proceeding

1.3 Identify and implement traffic management signage requirements

1.4 Select and check for faults plant, tools and equipment to carry out tasks

1.5 Identify, address and report hazards, risks and environmental issues

1.6 Select and wear correct personal protective equipment appropriate for work activities

1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency

2. Prepare surface and set out

2.1 Clear area of dirt, debris and other contaminants

2.2 Identify location for raised pavement markers and position to control point

2.3 Remove defective raised pavement markers where required

2.4 Prime marked location for raised pavement markers in readiness

3. Prepare marking materials

3.1 Mix and prepare marking material

3.2 Adjust additives and consistency of material to allow easy application and appropriate curing time

3.3 Transfer marking material carefully to applicator container

4. Apply raised pavement markers

4.1 Use equipment with the correct movement and pressure

4.2 Apply material

4.3 Identify and correct defects with the material

4.4 Maintain equipment

5. Measure work

5.1 Assess, record and report work outcomes

5.2 Calculate and quantify amount of raised pavement markers completed

5.3 Identify and report non-conforming work

6. Clean up

6.1 Clear work area and dispose of or recycle materials

6.2 Clean, check, maintain and store plant, tools and equipment

6.3 Carry out housekeeping activities

Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:

locates and applies applicable documentation, policies and procedures

works effectively with others to undertake and complete the installation of raised pavement markers that meets all of the required outcomes including:

communicating clearly and concisely with others to receive and clarify work instructions

using a range of communication techniques and systems such as signage to advise others of work activity and exclusion zone

demonstrates completion of the installation of raised pavement markers that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:

selecting and inspecting for faults in plant, tools and equipment

identifying, reporting and recording hazards, risks and environmental issues

removing dirt, debris and contaminants from the area

setting out the location for line marking with control points

preparing the marking materials by mixing, adjusting and curing appropriately

installation of two hundred (200) permanent reflective or non-reflective raised pavement markers on the various line configurations

measuring, calculating and quantifying amount of raised pavement markers

The candidate must demonstrate knowledge in installing raised pavement markers through:

applying organisation and site requirements and procedures for:

work, health and safety

equipment operation

operational, maintenance and basic diagnostics

JSAs/safe work method statements

housekeeping

identifying and applying road markings

identifying equipment types, characteristics, technical capabilities and limitations

complying with project quality requirements

identifying and using civil construction terminology

complying with site isolation and traffic control responsibilities and authorities

identifying road marking materials

applying raised pavement marking activities and techniques

complying with safety data sheets and materials handling methods

applying processes for the calculation of marker requirements, placement rates and travel speed

being prepared for fire/accident/emergency

An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,

this unit must be assessed in the context of this sector’s work environment; and,

this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,

assessment may be conducted in conjunction with the assessment of other Units of Competency; and,

assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,

assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,

where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,

assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:

Industry sector

AQF** Level

Required assessor or Industry subject matter expert experience

Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction

1

1 Year

2

2 Years

Drilling, Coal Mining and Extractive (Quarrying)

3-6

3 Years

Metalliferous Mining and Civil Construction

3-6

5 Years

Other sectors

Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation.

*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.

**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Access, interpret and apply raised pavement markers documentation and ensure the work activity is compliant 
Obtain, interpret, clarify and confirm work instructions before proceeding 
Identify and implement traffic management signage requirements 
Select and check for faults plant, tools and equipment to carry out tasks 
Identify, address and report hazards, risks and environmental issues 
Select and wear correct personal protective equipment appropriate for work activities 
Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency 
Clear area of dirt, debris and other contaminants 
Identify location for raised pavement markers and position to control point 
Remove defective raised pavement markers where required 
Prime marked location for raised pavement markers in readiness 
Mix and prepare marking material 
Adjust additives and consistency of material to allow easy application and appropriate curing time 
Transfer marking material carefully to applicator container 
Use equipment with the correct movement and pressure 
Apply material 
Identify and correct defects with the material 
Maintain equipment 
Assess, record and report work outcomes 
Calculate and quantify amount of raised pavement markers completed 
Identify and report non-conforming work 
Clear work area and dispose of or recycle materials 
Clean, check, maintain and store plant, tools and equipment 
Carry out housekeeping activities 
Access, interpret and apply raised pavement markers documentation and ensure the work activity is compliant 
Obtain, interpret, clarify and confirm work instructions before proceeding 
Identify and implement traffic management signage requirements 
Select and check for faults plant, tools and equipment to carry out tasks 
Identify, address and report hazards, risks and environmental issues 
Select and wear correct personal protective equipment appropriate for work activities 
Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency 
Clear area of dirt, debris and other contaminants 
Identify location for raised pavement markers and position to control point 
Remove defective raised pavement markers where required 
Prime marked location for raised pavement markers in readiness 
Mix and prepare marking material 
Adjust additives and consistency of material to allow easy application and appropriate curing time 
Transfer marking material carefully to applicator container 
Use equipment with the correct movement and pressure 
Apply material 
Identify and correct defects with the material 
Maintain equipment 
Assess, record and report work outcomes 
Calculate and quantify amount of raised pavement markers completed 
Identify and report non-conforming work 
Clear work area and dispose of or recycle materials 
Clean, check, maintain and store plant, tools and equipment 
Carry out housekeeping activities 

Forms

Assessment Cover Sheet

RIICRM207D - Install raised pavement markers
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

RIICRM207D - Install raised pavement markers

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: