Assessor Resource

RIICTC301D
Install tunnelling constructions services

Assessment tool

Version 1.0
Issue Date: March 2024


This unit describes a participant’s skills and knowledge required to install tunnelling constructions services in Civil Construction.

This unit is appropriate for those working in operational roles.

Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)



Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

1. Plan and prepare to install tunnelling construction services

1.1 Access, interpret and apply tunnelling construction services documentation and ensure the work activity is compliant

1.2 Obtain, interpret, clarify and confirm work instructions before proceeding

1.3 Identify, obtain and implement the traffic signage requirements

1.4 Select and wear personal protective equipment appropriate for work activities

1.5 Select and check for faults plant, tools and equipment to carry out tasks

1.6 Identify, address and report hazards, risks and environmental issues

1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency

2. Install ducting for air and ventilation

2.1 Install pipeline for compressed air to design location and connect to compressor

2.2 Install pipeline for air supply to location and specifications

2.3 Install ventilation ducting to location and specifications

3. Install pipelines for construction services

3.1 Install pipelines for drainage and connect to pumping system

3.2 Install pipelines for water supply

4. Install road/rail access

4.1 Lay, spread and compact material to provide surface for vehicular access where required

4.2 Identify and confirm rail track construction from tunnel drawings and specifications

4.3 Lay and install rail track to specifications

4.4 Install warning and directional signage to designed locations

5. Maintain services

5.1 Maintain service ducting and pipelines to operational conditions

5.2 Maintain access facilities to safe working operational requirements

5.3 Inspect and maintain rail track

6. Clean up

6.1 Clear work area and dispose or recycle materials

6.2 Plant, tools and equipment are cleaned, checked, maintained and stored

6.3 Carry out housekeeping activities

Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:

locates and applies relevant, legislation documentation, policies and procedures

implements the requirements, procedures and techniques for the safe, effective and efficient completion of installation of tunnelling constructions services including:

applying equipment/manual handling techniques

selecting and using relevant tools and equipment

works effectively with others to undertake and complete the installation of tunnelling constructions services that meets all of the required outcomes including:

organising work activities to meet all task requirements

communicating clearly and concisely with others to receive and clarify work instructions

using a range of communication techniques and systems such as signage to advise others of work activity and exclusion zone

demonstrates completion of installing tunnelling constructions services that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:

installation of a minimum of:

twenty (20) metres of ventilation,

twenty (20) metres of drainage and

twenty (20) metres of road/rail access for one project, to job specification

The candidate must demonstrate knowledge in installation of tunnelling constructions services through:

applying construction principles

identifying equipment types, characteristics, technical capabilities and limitations

complying with project quality requirements

identifying and using civil construction terminology

complying with site isolation and traffic control responsibilities and authorities

complying with safety data sheets and materials handling methods

being prepared for fire/accident/emergency

An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,

this unit must be assessed in the context of this sector’s work environment; and,

this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,

assessment may be conducted in conjunction with the assessment of other Units of Competency; and,

assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,

assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,

where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,

assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:

Industry sector

AQF** Level

Required assessor or Industry subject matter expert experience

Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction

1

1 Year

2

2 Years

Drilling, Coal Mining and Extractive (Quarrying)

3-6

3 Years

Metalliferous Mining and Civil Construction

3-6

5 Years

Other sectors

Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation.

*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.

**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

1. Plan and prepare to install tunnelling construction services

1.1 Access, interpret and apply tunnelling construction services documentation and ensure the work activity is compliant

1.2 Obtain, interpret, clarify and confirm work instructions before proceeding

1.3 Identify, obtain and implement the traffic signage requirements

1.4 Select and wear personal protective equipment appropriate for work activities

1.5 Select and check for faults plant, tools and equipment to carry out tasks

1.6 Identify, address and report hazards, risks and environmental issues

1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency

2. Install ducting for air and ventilation

2.1 Install pipeline for compressed air to design location and connect to compressor

2.2 Install pipeline for air supply to location and specifications

2.3 Install ventilation ducting to location and specifications

3. Install pipelines for construction services

3.1 Install pipelines for drainage and connect to pumping system

3.2 Install pipelines for water supply

4. Install road/rail access

4.1 Lay, spread and compact material to provide surface for vehicular access where required

4.2 Identify and confirm rail track construction from tunnel drawings and specifications

4.3 Lay and install rail track to specifications

4.4 Install warning and directional signage to designed locations

5. Maintain services

5.1 Maintain service ducting and pipelines to operational conditions

5.2 Maintain access facilities to safe working operational requirements

5.3 Inspect and maintain rail track

6. Clean up

6.1 Clear work area and dispose or recycle materials

6.2 Plant, tools and equipment are cleaned, checked, maintained and stored

6.3 Carry out housekeeping activities

Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:

locates and applies relevant, legislation documentation, policies and procedures

implements the requirements, procedures and techniques for the safe, effective and efficient completion of installation of tunnelling constructions services including:

applying equipment/manual handling techniques

selecting and using relevant tools and equipment

works effectively with others to undertake and complete the installation of tunnelling constructions services that meets all of the required outcomes including:

organising work activities to meet all task requirements

communicating clearly and concisely with others to receive and clarify work instructions

using a range of communication techniques and systems such as signage to advise others of work activity and exclusion zone

demonstrates completion of installing tunnelling constructions services that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:

installation of a minimum of:

twenty (20) metres of ventilation,

twenty (20) metres of drainage and

twenty (20) metres of road/rail access for one project, to job specification

The candidate must demonstrate knowledge in installation of tunnelling constructions services through:

applying construction principles

identifying equipment types, characteristics, technical capabilities and limitations

complying with project quality requirements

identifying and using civil construction terminology

complying with site isolation and traffic control responsibilities and authorities

complying with safety data sheets and materials handling methods

being prepared for fire/accident/emergency

An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,

this unit must be assessed in the context of this sector’s work environment; and,

this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,

assessment may be conducted in conjunction with the assessment of other Units of Competency; and,

assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,

assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,

where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,

assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:

Industry sector

AQF** Level

Required assessor or Industry subject matter expert experience

Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction

1

1 Year

2

2 Years

Drilling, Coal Mining and Extractive (Quarrying)

3-6

3 Years

Metalliferous Mining and Civil Construction

3-6

5 Years

Other sectors

Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation.

*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.

**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Access, interpret and apply tunnelling construction services documentation and ensure the work activity is compliant 
Obtain, interpret, clarify and confirm work instructions before proceeding 
Identify, obtain and implement the traffic signage requirements 
Select and wear personal protective equipment appropriate for work activities 
Select and check for faults plant, tools and equipment to carry out tasks 
Identify, address and report hazards, risks and environmental issues 
Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency 
Install pipeline for compressed air to design location and connect to compressor 
Install pipeline for air supply to location and specifications 
Install ventilation ducting to location and specifications 
Install pipelines for drainage and connect to pumping system 
Install pipelines for water supply 
Lay, spread and compact material to provide surface for vehicular access where required 
Identify and confirm rail track construction from tunnel drawings and specifications 
Lay and install rail track to specifications 
Install warning and directional signage to designed locations 
Maintain service ducting and pipelines to operational conditions 
Maintain access facilities to safe working operational requirements 
Inspect and maintain rail track 
Clear work area and dispose or recycle materials 
Plant, tools and equipment are cleaned, checked, maintained and stored 
Carry out housekeeping activities 
Access, interpret and apply tunnelling construction services documentation and ensure the work activity is compliant 
Obtain, interpret, clarify and confirm work instructions before proceeding 
Identify, obtain and implement the traffic signage requirements 
Select and wear personal protective equipment appropriate for work activities 
Select and check for faults plant, tools and equipment to carry out tasks 
Identify, address and report hazards, risks and environmental issues 
Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency 
Install pipeline for compressed air to design location and connect to compressor 
Install pipeline for air supply to location and specifications 
Install ventilation ducting to location and specifications 
Install pipelines for drainage and connect to pumping system 
Install pipelines for water supply 
Lay, spread and compact material to provide surface for vehicular access where required 
Identify and confirm rail track construction from tunnel drawings and specifications 
Lay and install rail track to specifications 
Install warning and directional signage to designed locations 
Maintain service ducting and pipelines to operational conditions 
Maintain access facilities to safe working operational requirements 
Inspect and maintain rail track 
Clear work area and dispose or recycle materials 
Plant, tools and equipment are cleaned, checked, maintained and stored 
Carry out housekeeping activities 

Forms

Assessment Cover Sheet

RIICTC301D - Install tunnelling constructions services
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

RIICTC301D - Install tunnelling constructions services

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: