RIIDES306D - Inspect, test and maintain safety shutdown systems on diesel engine systems
Assessor Resource
RIIDES306D Inspect, test and maintain safety shutdown systems on diesel engine systems
Assessment tool
Version 1.0 Issue Date: April 2024
This unit describes a participant’s skills and knowledge required to inspect, test and maintain safety shutdown systems on diesel engine systems in Coal mining.
This unit is appropriate for those working in operational roles.
Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of this unit.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
1. Plan for inspection, testing and maintenance of safety shutdown systems on diesel engine systems
1.1 Access, interpret, inspect, test and maintain the safety shutdown systems on diesel engine systems, apply documentation and ensure compliance to the work activity
1.2 Obtain, interpret clarify, confirm and apply verbal and written work instructions
1.3 Conduct a toolbox talk with others at the site prior to commencing and during work activities
1.4 Identify, address and report potential hazards, risks and environmental issues and implement control measures
1.5 Obtain and interpret emergency procedures, and be prepared for an emergency
2. Prepare for inspection, testing and maintenance of safety shutdown systems on diesel engine systems
2.1 Coordinate activities with others prior to commencement of, during, and on completion of the work activity
2.2 Identify and obtain items and tools required for the safe, effective and efficient conduct of the tasks
2.3 Access and wear personal protection equipment appropriate for work activities
2.4 Access and apply required isolation and lock-out of all equipment necessary for the safe execution of tasks
3. Carry out inspection of safety shutdown systems on diesel engine systems
3.1 Carry out inspection of engine safety shutdown systems (fuel shutdown systems)
3.2 Carry out inspection of emergency safety shutdown systems and sensing devices
3.3 Carry out inspection of manual fuel shut-off valves
3.4 Carry out inspection of hoses, tubes cables and connectors associated with safety shutdown systems
3.5 Diagnose and record existing or identified faults and recommend corrective actions
4. Carry out testing of safety shutdown systems on diesel engine systems
4.1 Access and operate testing equipment
4.2 Carry out testing and fault finding of engine safety shutdown systems (fuel shutdown systems)
4.3 Carry out testing and fault finding of emergency safety shutdown systems and sensing devices
4.4 Carry out testing and fault finding of manual fuel shut-off valves
4.5 Identify and record existing or potential faults and recommend corrective actions
5. Carry out routine maintenance of safety shutdown systems on diesel engine systems
5.1 Access and use maintenance tools and equipment
5.2 Identify, interpret and apply corrective actions
5.3 Carry out routine maintenance of engine safety shutdown systems (fuel shutdown systems)
5.4 Carry out routine maintenance of emergency safety shutdown systems and sensing devices
5.5 Carry out routine maintenance of manual fuel shut-off valves
6. Carry out the overhaul of safety shutdown systems on diesel engine systems
6.1 Access and use overhaul items, tools and equipment
6.2 Carry out overhaul of safety shutdown systems
7. Conduct housekeeping activities
7.1 Clean, check, maintain and store plant, tools and equipment
7.2 Report issues identified with plant, tools and equipment
Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:
locates and applies relevant legislation, documentation, policies and procedures
works effectively with others to undertake and complete the inspection, testing and maintenance of safety shutdown systems on diesel engine systems that meets all of the required outcomes including:
using a range of communications techniques and equipment to convey information to others
maintaining written and verbal reporting requirements and procedures
communicating clearly and concisely with others to receive and clarify work instructions
demonstrates completion of inspecting, testing and maintaining safety shutdown systems on diesel engine systems that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:
selecting and using appropriate inspection and testing methods
diagnosing and rectifying faults
completing routine maintenance
completing overhaul
completing and maintaining inspection, testing and maintenance records
The candidate must demonstrate knowledge in, when inspecting, testing and maintaining safety shutdown systems on diesel engine systems through:
site risk, statutory compliance, health, safety, environmental, quality and communication requirements and procedures
site and manufacturer’s requirements and procedures
tools required to be used in performance of inspection, testing and maintenance tasks
site inspection, testing and maintenance support requirements and availability
site work area inspection requirements
site work area safeguarding options and requirements
site isolation and lock-out requirements and procedures
site hazard and emergency procedures
An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,
this unit must be assessed in the context of this sector’s work environment; and,
this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,
assessment may be conducted in conjunction with the assessment of other Units of Competency; and,
assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,
assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,
where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,
assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:
Industry sector
AQF** Level
Required assessor or Industry subject matter expert experience
Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction
1
1 Year
2
2 Years
Drilling, Coal Mining and Extractive (Quarrying)
3-6
3 Years
Metalliferous Mining and Civil Construction
3-6
5 Years
Other sectors
Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation.
*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.
**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
1. Plan for inspection, testing and maintenance of safety shutdown systems on diesel engine systems
1.1 Access, interpret, inspect, test and maintain the safety shutdown systems on diesel engine systems, apply documentation and ensure compliance to the work activity
1.2 Obtain, interpret clarify, confirm and apply verbal and written work instructions
1.3 Conduct a toolbox talk with others at the site prior to commencing and during work activities
1.4 Identify, address and report potential hazards, risks and environmental issues and implement control measures
1.5 Obtain and interpret emergency procedures, and be prepared for an emergency
2. Prepare for inspection, testing and maintenance of safety shutdown systems on diesel engine systems
2.1 Coordinate activities with others prior to commencement of, during, and on completion of the work activity
2.2 Identify and obtain items and tools required for the safe, effective and efficient conduct of the tasks
2.3 Access and wear personal protection equipment appropriate for work activities
2.4 Access and apply required isolation and lock-out of all equipment necessary for the safe execution of tasks
3. Carry out inspection of safety shutdown systems on diesel engine systems
3.1 Carry out inspection of engine safety shutdown systems (fuel shutdown systems)
3.2 Carry out inspection of emergency safety shutdown systems and sensing devices
3.3 Carry out inspection of manual fuel shut-off valves
3.4 Carry out inspection of hoses, tubes cables and connectors associated with safety shutdown systems
3.5 Diagnose and record existing or identified faults and recommend corrective actions
4. Carry out testing of safety shutdown systems on diesel engine systems
4.1 Access and operate testing equipment
4.2 Carry out testing and fault finding of engine safety shutdown systems (fuel shutdown systems)
4.3 Carry out testing and fault finding of emergency safety shutdown systems and sensing devices
4.4 Carry out testing and fault finding of manual fuel shut-off valves
4.5 Identify and record existing or potential faults and recommend corrective actions
5. Carry out routine maintenance of safety shutdown systems on diesel engine systems
5.1 Access and use maintenance tools and equipment
5.2 Identify, interpret and apply corrective actions
5.3 Carry out routine maintenance of engine safety shutdown systems (fuel shutdown systems)
5.4 Carry out routine maintenance of emergency safety shutdown systems and sensing devices
5.5 Carry out routine maintenance of manual fuel shut-off valves
6. Carry out the overhaul of safety shutdown systems on diesel engine systems
6.1 Access and use overhaul items, tools and equipment
6.2 Carry out overhaul of safety shutdown systems
7. Conduct housekeeping activities
7.1 Clean, check, maintain and store plant, tools and equipment
7.2 Report issues identified with plant, tools and equipment
Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:
locates and applies relevant legislation, documentation, policies and procedures
works effectively with others to undertake and complete the inspection, testing and maintenance of safety shutdown systems on diesel engine systems that meets all of the required outcomes including:
using a range of communications techniques and equipment to convey information to others
maintaining written and verbal reporting requirements and procedures
communicating clearly and concisely with others to receive and clarify work instructions
demonstrates completion of inspecting, testing and maintaining safety shutdown systems on diesel engine systems that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:
selecting and using appropriate inspection and testing methods
diagnosing and rectifying faults
completing routine maintenance
completing overhaul
completing and maintaining inspection, testing and maintenance records
The candidate must demonstrate knowledge in, when inspecting, testing and maintaining safety shutdown systems on diesel engine systems through:
site risk, statutory compliance, health, safety, environmental, quality and communication requirements and procedures
site and manufacturer’s requirements and procedures
tools required to be used in performance of inspection, testing and maintenance tasks
site inspection, testing and maintenance support requirements and availability
site work area inspection requirements
site work area safeguarding options and requirements
site isolation and lock-out requirements and procedures
site hazard and emergency procedures
An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,
this unit must be assessed in the context of this sector’s work environment; and,
this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,
assessment may be conducted in conjunction with the assessment of other Units of Competency; and,
assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,
assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,
where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,
assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:
Industry sector
AQF** Level
Required assessor or Industry subject matter expert experience
Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction
1
1 Year
2
2 Years
Drilling, Coal Mining and Extractive (Quarrying)
3-6
3 Years
Metalliferous Mining and Civil Construction
3-6
5 Years
Other sectors
Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation.
*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.
**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Access, interpret, inspect, test and maintain the safety shutdown systems on diesel engine systems, apply documentation and ensure compliance to the work activity
Obtain, interpret clarify, confirm and apply verbal and written work instructions
Conduct a toolbox talk with others at the site prior to commencing and during work activities
Identify, address and report potential hazards, risks and environmental issues and implement control measures
Obtain and interpret emergency procedures, and be prepared for an emergency
Coordinate activities with others prior to commencement of, during, and on completion of the work activity
Identify and obtain items and tools required for the safe, effective and efficient conduct of the tasks
Access and wear personal protection equipment appropriate for work activities
Access and apply required isolation and lock-out of all equipment necessary for the safe execution of tasks
Carry out inspection of engine safety shutdown systems (fuel shutdown systems)
Carry out inspection of emergency safety shutdown systems and sensing devices
Carry out inspection of manual fuel shut-off valves
Carry out inspection of hoses, tubes cables and connectors associated with safety shutdown systems
Diagnose and record existing or identified faults and recommend corrective actions
Access and operate testing equipment
Carry out testing and fault finding of engine safety shutdown systems (fuel shutdown systems)
Carry out testing and fault finding of emergency safety shutdown systems and sensing devices
Carry out testing and fault finding of manual fuel shut-off valves
Identify and record existing or potential faults and recommend corrective actions
Access and use maintenance tools and equipment
Identify, interpret and apply corrective actions
Carry out routine maintenance of engine safety shutdown systems (fuel shutdown systems)
Carry out routine maintenance of emergency safety shutdown systems and sensing devices
Carry out routine maintenance of manual fuel shut-off valves
Access and use overhaul items, tools and equipment
Carry out overhaul of safety shutdown systems
Clean, check, maintain and store plant, tools and equipment
Report issues identified with plant, tools and equipment
Access, interpret, inspect, test and maintain the safety shutdown systems on diesel engine systems, apply documentation and ensure compliance to the work activity
Obtain, interpret clarify, confirm and apply verbal and written work instructions
Conduct a toolbox talk with others at the site prior to commencing and during work activities
Identify, address and report potential hazards, risks and environmental issues and implement control measures
Obtain and interpret emergency procedures, and be prepared for an emergency
Coordinate activities with others prior to commencement of, during, and on completion of the work activity
Identify and obtain items and tools required for the safe, effective and efficient conduct of the tasks
Access and wear personal protection equipment appropriate for work activities
Access and apply required isolation and lock-out of all equipment necessary for the safe execution of tasks
Carry out inspection of engine safety shutdown systems (fuel shutdown systems)
Carry out inspection of emergency safety shutdown systems and sensing devices
Carry out inspection of manual fuel shut-off valves
Carry out inspection of hoses, tubes cables and connectors associated with safety shutdown systems
Diagnose and record existing or identified faults and recommend corrective actions
Access and operate testing equipment
Carry out testing and fault finding of engine safety shutdown systems (fuel shutdown systems)
Carry out testing and fault finding of emergency safety shutdown systems and sensing devices
Carry out testing and fault finding of manual fuel shut-off valves
Identify and record existing or potential faults and recommend corrective actions
Access and use maintenance tools and equipment
Identify, interpret and apply corrective actions
Carry out routine maintenance of engine safety shutdown systems (fuel shutdown systems)
Carry out routine maintenance of emergency safety shutdown systems and sensing devices
Carry out routine maintenance of manual fuel shut-off valves
Access and use overhaul items, tools and equipment
Carry out overhaul of safety shutdown systems
Clean, check, maintain and store plant, tools and equipment
Report issues identified with plant, tools and equipment
Forms
Assessment Cover Sheet
RIIDES306D - Inspect, test and maintain safety shutdown systems on diesel engine systems
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
RIIDES306D - Inspect, test and maintain safety shutdown systems on diesel engine systems
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent