List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
1. Prepare for operation of plant/machinery on live stockpile | 1.1 Access, interpret and apply stockpile operations documentation, and ensure the work activity is compliant 1.2 Obtain, read, interpret, clarify and confirm work requirements 1.3 Identify and address risks, hazards and environmental issues and implement control measures 1.4 Select and wear personal protective equipment appropriate for work activities 1.5 Interpret and apply geological and survey data required to complete the allocated work 1.6 Inspect and assess state of stockpile slope stability 1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency |
2. Push and place materials on the stockpile | 2.1 Coordinate activities with others at the site prior to commencement of, and during, the work activity 2.2 Carry out start-up, park, shutdown and secure equipment procedures 2.3 Drive and operate equipment effectively using controls and functions to complete specified tasks 2.4 Identify location, and build and maintain windrows, and ensure safe operating distance from edges of stockpile 2.5 Continuously assess location of stockpile edge in relation to operating plant/equipment and stability of stockpile slope 2.6 Push materials perpendicular to and facing the slope edge and avoiding operation parallel to the stockpile edge 2.7 Continually monitor hazards and risks, and ensure safety of self, other personnel, plant and equipment 2.8 Operate at a speed consistent with the type of work being performed and the current ground conditions |
3. Push and place materials around draw points and bridged materials | 3.1 Inspect stockpile, and identify the location of draw points/holes and suspected bridged materials and ensure that draw points/holes are clearly indicated 3.2 Continuously assess location of draw points/holes and bridged materials in relation to operating plant/equipment to maintain safe operation 3.3 Operate plant/machinery perpendicular to the edge of the draw hole or bridged material maintaining a safe distance from draw hole/bridge 3.4 Communicate with relevant site personnel to determine the feeders being used and the amount of material being drawn from the stockpile 3.5 Complete the work plan, within the operating capacities of the equipment |
4. Finalise stockpile operations | 4.1 Carry out plant/equipment shut-down procedures 4.2 Clean, inspect and store attachments and equipment 4.3 Clean and leave plant/equipment parked on stable, flat ground for use by next operator 4.4 Report location and state/condition of plant/equipment before going off shift 4.5 Complete all required records and documents |
Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:
locates and applies relevant documentation, policies and procedures
implements the requirements, procedures and techniques for the safe, effective and efficient operation of plant/machinery on live stockpiles including:
conducting prestart checks prior to commencing operations and shutdown procedures on completion of operations
carrying out vehicle refuelling requirements and procedures
driving and operating the equipment to site conditions
applying safe work practices and identifying and reporting all potential hazards, risks and environmental issues
applying problem solving and troubleshooting techniques
working safely around other machines and personnel
works effectively with others to operate plant/machinery on live stockpiles and meet all of the required outcomes including:
using a range of communications techniques and equipment to convey information to others
maintaining written and verbal reporting requirements and procedures
demonstrates completion of operating plant/machinery on live stockpiles that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:
driving and operating the stockpile dozer for operations adjusting equipment operations to suit site conditions
demonstrates skills of pushing and placing of materials on coal stockpiles in varying conditions of weather, lighting and stockpile volume
identifying when stockpile is close to or at capacity and adjust activity to ensure safety to persons, equipment and the environment
locating the draw down point, bridged materials and avoids open holes
towing and pushing of equipment and plant
not parking up near open holes or draw down points
The candidate must demonstrate knowledge of the following when operating plant/machinery on live stockpiles:
being prepared for spontaneous combustion situation
completing equipment lowering and lifting
communicating and performing isolation procedures
identifying equipment processes, technical capability and limitations
identifying, interpreting and using geological and technical data (basic)
being prepared for fire/accident/emergency
identifying signs of operator fatigue and how it should be managed identifying
An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,
this unit must be assessed in the context of this sector’s work environment; and,
this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,
assessment may be conducted in conjunction with the assessment of other Units of Competency; and,
assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,
assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,
where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,
assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:
Industry sector | AQF** Level | Required assessor or Industry subject matter expert experience |
Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction | 1 | 1 Year |
2 | 2 Years |
Drilling, Coal Mining and Extractive (Quarrying) | 3-6 | 3 Years |
Metalliferous Mining and Civil Construction | 3-6 | 5 Years |
Other sectors | Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation. |
*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.
**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level