This unit describes a participant’s skills and knowledge required to conduct backhoe/loader operations in Civil construction.
This unit is appropriate for those working in operational roles.
Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
1. Plan and prepare for backhoe/loader operations
1.1 Access, interpret and apply backhoe/loader operations documentation and ensure the work activity is compliant
1.2 Obtain, read, interpret, clarify and confirm work instructions
1.3 Identify and address risks, hazards and environmental issues and implement control measures
1.4 Select and wear personal protective equipment appropriate for work activities
1.5 Identify, obtain and implement signage traffic management requirements
1.6 Select, and check for faults, equipment and/or attachments for work activities
1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
2. Operate backhoe/ loader
2.1 Carry out pre-start, start-up, park, shutdown and secure equipment procedures
2.2 Coordinate activities with others at the site prior to commencement of, and during, the work activity
2.3 Continually monitor hazards and risks , and ensure safety of self, other personnel, plant and equipment
2.4 Drive and operate machine, and modify the operating technique to meet changing work conditions
2.5 Complete work plan within the operating capacity of the equipment
2.6 Act on or report monitoring systems and alarms
3. Load, carry and place materials
3.1 Conduct communication practices associated with transportation and lifting of materials
3.2 Establish weight of load and ensure it is within safe operational limits of the machine
3.3 Select, attach and apply slings and lifting gear in accordance with safe working load requirements
3.4 Position and locate machinery to ensure stability to effectively shift materials according to job specifications
3.5 Shift load safely and effectively
3.6 Move load using hand/audible/communication signals
4. Select, remove and fit attachments
4.1 Select attachment for the task
4.2 Remove and fit attachment
4.3 Test attachment and ensure correct fitting and operation
4.4 Use attachment in accordance with recommendations and design limits
4.5 Clean and store removed attachments in designated location
5. Relocate the backhoe/ loader
5.1 Prepare backhoe/loader for relocation
5.2 Move backhoe/loader safely between worksites, observing relevant codes and traffic management requirements
6. Carry out machine operator maintenance
6.1 Prepare machine for maintenance
6.2 Conduct inspection and fault finding
6.3 Carry out scheduled maintenance tasks
6.4 Process written maintenance records
7. Clean up
7.1 Clear work area and dispose of or recycle materials
7.2 Process records
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
1. Plan and prepare for backhoe/loader operations
1.1 Access, interpret and apply backhoe/loader operations documentation and ensure the work activity is compliant
1.2 Obtain, read, interpret, clarify and confirm work instructions
1.3 Identify and address risks, hazards and environmental issues and implement control measures
1.4 Select and wear personal protective equipment appropriate for work activities
1.5 Identify, obtain and implement signage traffic management requirements
1.6 Select, and check for faults, equipment and/or attachments for work activities
1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
2. Operate backhoe/ loader
2.1 Carry out pre-start, start-up, park, shutdown and secure equipment procedures
2.2 Coordinate activities with others at the site prior to commencement of, and during, the work activity
2.3 Continually monitor hazards and risks , and ensure safety of self, other personnel, plant and equipment
2.4 Drive and operate machine, and modify the operating technique to meet changing work conditions
2.5 Complete work plan within the operating capacity of the equipment
2.6 Act on or report monitoring systems and alarms
3. Load, carry and place materials
3.1 Conduct communication practices associated with transportation and lifting of materials
3.2 Establish weight of load and ensure it is within safe operational limits of the machine
3.3 Select, attach and apply slings and lifting gear in accordance with safe working load requirements
3.4 Position and locate machinery to ensure stability to effectively shift materials according to job specifications
3.5 Shift load safely and effectively
3.6 Move load using hand/audible/communication signals
4. Select, remove and fit attachments
4.1 Select attachment for the task
4.2 Remove and fit attachment
4.3 Test attachment and ensure correct fitting and operation
4.4 Use attachment in accordance with recommendations and design limits
4.5 Clean and store removed attachments in designated location
5. Relocate the backhoe/ loader
5.1 Prepare backhoe/loader for relocation
5.2 Move backhoe/loader safely between worksites, observing relevant codes and traffic management requirements
6. Carry out machine operator maintenance
6.1 Prepare machine for maintenance
6.2 Conduct inspection and fault finding
6.3 Carry out scheduled maintenance tasks
6.4 Process written maintenance records
7. Clean up
7.1 Clear work area and dispose of or recycle materials
7.2 Process records
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Access, interpret and apply backhoe/loader operations documentation and ensure the work activity is compliant
Obtain, read, interpret, clarify and confirm work instructions
Identify and address risks, hazards and environmental issues and implement control measures
Select and wear personal protective equipment appropriate for work activities
Identify, obtain and implement signage traffic management requirements
Select, and check for faults, equipment and/or attachments for work activities
Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
Carry out pre-start, start-up, park, shutdown and secure equipment procedures
Coordinate activities with others at the site prior to commencement of, and during, the work activity
Continually monitor hazards and risks , and ensure safety of self, other personnel, plant and equipment
Drive and operate machine, and modify the operating technique to meet changing work conditions
Complete work plan within the operating capacity of the equipment
Act on or report monitoring systems and alarms
Conduct communication practices associated with transportation and lifting of materials
Establish weight of load and ensure it is within safe operational limits of the machine
Select, attach and apply slings and lifting gear in accordance with safe working load requirements
Position and locate machinery to ensure stability to effectively shift materials according to job specifications
Shift load safely and effectively
Move load using hand/audible/communication signals
Select attachment for the task
Remove and fit attachment
Test attachment and ensure correct fitting and operation
Use attachment in accordance with recommendations and design limits
Clean and store removed attachments in designated location
Prepare backhoe/loader for relocation
Move backhoe/loader safely between worksites, observing relevant codes and traffic management requirements
Prepare machine for maintenance
Conduct inspection and fault finding
Carry out scheduled maintenance tasks
Process written maintenance records
Clear work area and dispose of or recycle materials
Process records
Forms
Assessment Cover Sheet
RIIMPO319D - Conduct backhoe/loader operations
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
RIIMPO319D - Conduct backhoe/loader operations
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent