Assessor Resource

RIIOGD302D
Trip casing

Assessment tool

Version 1.0
Issue Date: May 2024


This unit describes a participant’s skills and knowledge required to apply trip casing in Drilling.

This unit is appropriate for those working in operational roles.

Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the unit.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

1. Plan and prepare for operations

1.1 Access, interpret and apply trip casing documentation and ensure the work activity is compliant

1.2 Obtain, read, interpret, clarify and confirm work requirements

1.3 Identify and address potential risks, hazards and environmental issues and implement control measures

1.4 Select the personal protective equipment appropriate for the work activity

1.5 Identify, locate and apply correct personal protective equipment

1.6 Resolve coordination requirements with others at the site prior to commencing, during and on completion of the work activities and ensure briefings/handover details are read/passed on

1.7 Confirm availability and status of necessary permits to work in accordance with operational and legislative requirements

1.8 Confirm availability of necessary third party utilities

2. Prepare to trip casing

2.1 Check grade or grades of casing

2.2 Supervise crew in correctly positioning casing on racks

2.3 Measure and record in writing casing

2.4 Identify joint by the numerical order in which it will be run in the hole and its measured length

2.5 Supervise crew to remove thread protectors, rabbit casing, clean and lubricate threads

2.6 Check casing shoe and hanger joints for damage to threads, sealing surfaces and flapper valves where fitted

2.7 Assemble and check operating conditions of casing running equipment, including slips, tongs, elevators, rubber clamp, protectors and tailing ropes

2.8 Line up pumps to fill casing during running operation

3. Operate derrick during tripping of casing

3.1 Steady casing during stabbing

3.2 Release pick-up elevators

3.3 Correctly align casing for make-up

3.4 Latch side door or slip type elevators

3.5 Relieve casing stabber during casing running operations

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

1. Plan and prepare for operations

1.1 Access, interpret and apply trip casing documentation and ensure the work activity is compliant

1.2 Obtain, read, interpret, clarify and confirm work requirements

1.3 Identify and address potential risks, hazards and environmental issues and implement control measures

1.4 Select the personal protective equipment appropriate for the work activity

1.5 Identify, locate and apply correct personal protective equipment

1.6 Resolve coordination requirements with others at the site prior to commencing, during and on completion of the work activities and ensure briefings/handover details are read/passed on

1.7 Confirm availability and status of necessary permits to work in accordance with operational and legislative requirements

1.8 Confirm availability of necessary third party utilities

2. Prepare to trip casing

2.1 Check grade or grades of casing

2.2 Supervise crew in correctly positioning casing on racks

2.3 Measure and record in writing casing

2.4 Identify joint by the numerical order in which it will be run in the hole and its measured length

2.5 Supervise crew to remove thread protectors, rabbit casing, clean and lubricate threads

2.6 Check casing shoe and hanger joints for damage to threads, sealing surfaces and flapper valves where fitted

2.7 Assemble and check operating conditions of casing running equipment, including slips, tongs, elevators, rubber clamp, protectors and tailing ropes

2.8 Line up pumps to fill casing during running operation

3. Operate derrick during tripping of casing

3.1 Steady casing during stabbing

3.2 Release pick-up elevators

3.3 Correctly align casing for make-up

3.4 Latch side door or slip type elevators

3.5 Relieve casing stabber during casing running operations

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Access, interpret and apply trip casing documentation and ensure the work activity is compliant 
Obtain, read, interpret, clarify and confirm work requirements 
Identify and address potential risks, hazards and environmental issues and implement control measures 
Select the personal protective equipment appropriate for the work activity 
Identify, locate and apply correct personal protective equipment 
Resolve coordination requirements with others at the site prior to commencing, during and on completion of the work activities and ensure briefings/handover details are read/passed on 
Confirm availability and status of necessary permits to work in accordance with operational and legislative requirements 
Confirm availability of necessary third party utilities 
Check grade or grades of casing 
Supervise crew in correctly positioning casing on racks 
Measure and record in writing casing 
Identify joint by the numerical order in which it will be run in the hole and its measured length 
Supervise crew to remove thread protectors, rabbit casing, clean and lubricate threads 
Check casing shoe and hanger joints for damage to threads, sealing surfaces and flapper valves where fitted 
Assemble and check operating conditions of casing running equipment, including slips, tongs, elevators, rubber clamp, protectors and tailing ropes 
Line up pumps to fill casing during running operation 
Steady casing during stabbing 
Release pick-up elevators 
Correctly align casing for make-up 
Latch side door or slip type elevators 
Relieve casing stabber during casing running operations 

Forms

Assessment Cover Sheet

RIIOGD302D - Trip casing
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

RIIOGD302D - Trip casing

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: