List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
1. Plan and prepare for calcination operations | 1.1 Access, interpret and apply calcinations activities documentation and ensure the work activity is compliant 1.2. Obtain, read, interpret, clarify and confirm work requirements 1.3. Coordinate and communicate with other personnel using approved communication methods 1.4. Select and wear personal protective equipment appropriate for work activities 1.5. Select appropriate type of auxiliary equipment for work activities 1.6. Carry out pre-start, start-up, park up, shutdown and secure equipment procedures 1.7. Identify and address potential risks, hazards and environmental issues, and implement control measures 1.8. Obtain and interpret emergency procedures and be ready for fire/accident/emergency 1.9. Use approved dust suppression and extraction methods 1.10. Ensure area is well ventilated before entry |
2. Start-up equipment in sequence | 2.1. Carry out start-up procedures and completes start-up checks according to plant configurations and system requirements 2.2. Confirm plant is operational |
3. Operate and monitor equipment | 3.1. Read and interpret data from equipment indicators to determine calcination efficiency 3.2. Continuously inspect and monitor operations/plant and catchment areas to identify process defects and potential problems 3.3. Adjust equipment to approved operating parameters to optimise and maintain efficient calcining and to meet product quality targets 3.4. Add reagents to approved operating parameters 3.5. Determine the effects adjustments have on upstream or downstream outputs and communicate to others 3.6. Complete all required documentation clearly, concisely and on time 3.7. Pass on end of shift information verbally or in writing to oncoming shift |
4. Shutdown in sequence and/or isolate equipment | 4.1. Shutdown or isolates equipment based on process and safety requirements 4.2. Perform post shutdown or isolation checks 4.3. Return equipment to service |
5. Conduct housekeeping activities | 5.1. Clear work area and dispose of or recycle materials 5.2. Clean and maintain condition of equipment, ensure suitability for use, and address/report issues 5.3. Manage and/or report hazards, and maintain a safe working environment 5.4. Process records |
Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:
locates and applies relevant documentation, policies and procedures
implements requirements, procedures and techniques for the safe, effective and efficient completion of calcinations activities including:
adjusting equipment to approved operating parameters to meet product quality targets
adding reagents to approved operating parameters
carrying out minor maintenance to maintain condition of equipment
completing all required documentation clearly, concisely and on time
works effectively with others to undertake and complete the calcinations activities in a way that meets all of the required outcomes including:
using a range of communications techniques and equipment to convey information to others
maintaining written and verbal reporting requirements and procedures
organising work activities to meet all task requirements
communicating clearly and concisely with others to receive and clarify work instructions
demonstrates completion of the conduction of calcinations activities that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:
coordinating calcination activity with others
adjusting equipment and communicating effects upstream and downstream
adding reagents
isolating and shutting down calcination equipment in sequence and perform checks
performing minor maintenance
returning calcination equipment to service
The candidate must demonstrate knowledge of conducting calcinations activities through:
apply, organisation and site requirements and procedures for conducting calcinations activities including:
WHS, site safety and emergency requirements and procedures
environmental procedures
hazardous goods procedures and consequences of spills and hazardous goods
isolation procedures
equipment safety requirements
operational procedures and checks
wet and dry working procedures
breakdown procedures
diagnosing faults, reporting defects and identifying repair requirements
interpreting reports
using lift (manual, cranes and loads)
accurately maintaining records
monitoring operations
using hand and power tools
contaminant identification
calcining process
pumping system and flow charts (pipeline and sprinkler systems)
reagent types
sampling
monitor equipment limitations and operating parameters
interpreting metallurgical and technical data (basic)
identifying types of ores
An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,
this unit must be assessed in the context of this sector’s work environment; and,
this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,
assessment may be conducted in conjunction with the assessment of other Units of Competency; and,
assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,
assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,
where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,
assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:
Industry sector | AQF** Level | Required assessor or Industry subject matter expert experience |
Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction | 1 | 1 Year |
2 | 2 Years |
Drilling, Coal Mining and Extractive (Quarrying) | 3-6 | 3 Years |
Metalliferous Mining and Civil Construction | 3-6 | 5 Years |
Other sectors | Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation. |
*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.
**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level