Assessor Resource

RIIWHS302D
Implement traffic management plan

Assessment tool

Version 1.0
Issue Date: April 2024


This unit develops a participant’s skills and knowledge required to implement a traffic management plan in Civil construction.

This unit is appropriate for those working in supervisory roles.

Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.

Note: The terms Occupational Health and Safety (OHS) and Work Health and Safety (WHS) are equivalent and generally either can be used in the workplace. In jurisdictions where the National Model WHS Legislation has not been implemented RTOs are advised to contextualise the unit of competency by referring to the existing State/Territory OHS legislative requirements.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

1 Plan and prepare to implement traffic management plan

1.1 Access, interpret and apply traffic management documentation and ensure the work activity is compliant

1.2 Obtain, read, interpret, clarify and confirm work requirements

1.3 Identify, address and report potential risks, hazards and environmental issues and implement control measures

1.4 Select and wear personal protective equipment appropriate for the work activity

1.5 Identify, obtain and implement traffic control signage and devices

1.6 Select, and check for faults, tools and equipment to carry out tasks

1.7 Identify, confirm and apply environmental protection requirements

1.8 Check the designated traffic controllers’ training and qualifications for currency

1.9 Advise traffic controllers of the traffic flow requirements

2 Set out the traffic guidance scheme

2.1 Select traffic guidance scheme to suit site conditions, traffic volumes and work activities

2.2 Determine and ensure adherence to work schedule, maximum traffic delays, signals and site communications

2.3 Ensure signs and devices are correctly positioned on the approaches to the work area

2.4 Ensure that signs and devices are positioned and displayed on each approach

2.5 Ensure signs and devices are positioned and displayed laterally

2.6 Ensure traffic is controlled effectively to protect the work crew

3 Monitor traffic guidance scheme

3.1 Ensure traffic flow is monitored and effectiveness of guidance scheme determined

3.2 Monitor work activities and provide guidance to adjust scheme

3.3 Apply process for dealing with traffic controllers who fail to adhere to approved procedures

3.4 Apply procedures to deal with offending motorists

4 Close down traffic guidance scheme

4.1 Ensure traffic is controlled to protect work crew removing traffic control devices

4.2 Ensure signs are removed in sequence to provide maximum warning during removal

4.3 Ensure guidance scheme details are recorded and reported as required

4.4 Ensure incidents are recorded and reported as required

5 Clean up

5.1 Ensure work area is appropriately cleared

5.2 Ensure tools and equipment are cleaned, checked, maintained and stored

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

1 Plan and prepare to implement traffic management plan

1.1 Access, interpret and apply traffic management documentation and ensure the work activity is compliant

1.2 Obtain, read, interpret, clarify and confirm work requirements

1.3 Identify, address and report potential risks, hazards and environmental issues and implement control measures

1.4 Select and wear personal protective equipment appropriate for the work activity

1.5 Identify, obtain and implement traffic control signage and devices

1.6 Select, and check for faults, tools and equipment to carry out tasks

1.7 Identify, confirm and apply environmental protection requirements

1.8 Check the designated traffic controllers’ training and qualifications for currency

1.9 Advise traffic controllers of the traffic flow requirements

2 Set out the traffic guidance scheme

2.1 Select traffic guidance scheme to suit site conditions, traffic volumes and work activities

2.2 Determine and ensure adherence to work schedule, maximum traffic delays, signals and site communications

2.3 Ensure signs and devices are correctly positioned on the approaches to the work area

2.4 Ensure that signs and devices are positioned and displayed on each approach

2.5 Ensure signs and devices are positioned and displayed laterally

2.6 Ensure traffic is controlled effectively to protect the work crew

3 Monitor traffic guidance scheme

3.1 Ensure traffic flow is monitored and effectiveness of guidance scheme determined

3.2 Monitor work activities and provide guidance to adjust scheme

3.3 Apply process for dealing with traffic controllers who fail to adhere to approved procedures

3.4 Apply procedures to deal with offending motorists

4 Close down traffic guidance scheme

4.1 Ensure traffic is controlled to protect work crew removing traffic control devices

4.2 Ensure signs are removed in sequence to provide maximum warning during removal

4.3 Ensure guidance scheme details are recorded and reported as required

4.4 Ensure incidents are recorded and reported as required

5 Clean up

5.1 Ensure work area is appropriately cleared

5.2 Ensure tools and equipment are cleaned, checked, maintained and stored

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Access, interpret and apply traffic management documentation and ensure the work activity is compliant 
Obtain, read, interpret, clarify and confirm work requirements 
Identify, address and report potential risks, hazards and environmental issues and implement control measures 
Select and wear personal protective equipment appropriate for the work activity 
Identify, obtain and implement traffic control signage and devices 
Select, and check for faults, tools and equipment to carry out tasks 
Identify, confirm and apply environmental protection requirements 
Check the designated traffic controllers’ training and qualifications for currency 
Advise traffic controllers of the traffic flow requirements 
Select traffic guidance scheme to suit site conditions, traffic volumes and work activities 
Determine and ensure adherence to work schedule, maximum traffic delays, signals and site communications 
Ensure signs and devices are correctly positioned on the approaches to the work area 
Ensure that signs and devices are positioned and displayed on each approach 
Ensure signs and devices are positioned and displayed laterally 
Ensure traffic is controlled effectively to protect the work crew 
Ensure traffic flow is monitored and effectiveness of guidance scheme determined 
Monitor work activities and provide guidance to adjust scheme 
Apply process for dealing with traffic controllers who fail to adhere to approved procedures 
Apply procedures to deal with offending motorists 
Ensure traffic is controlled to protect work crew removing traffic control devices 
Ensure signs are removed in sequence to provide maximum warning during removal 
Ensure guidance scheme details are recorded and reported as required 
Ensure incidents are recorded and reported as required 
Ensure work area is appropriately cleared 
Ensure tools and equipment are cleaned, checked, maintained and stored 

Forms

Assessment Cover Sheet

RIIWHS302D - Implement traffic management plan
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

RIIWHS302D - Implement traffic management plan

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: