Assessor Resource

RIIWSV202D
Carry out well servicing rig lease operations

Assessment tool

Version 1.0
Issue Date: May 2024


This unit describes a participant’s skills and knowledge required carry out well servicing rig lease operations in Drilling.

This unit is appropriate for those working in assistant roles.

Licensing, legislative, regulatory and certification requirements that may apply to this unit can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the unit.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

1. Plan and prepare for rig lease operations

1.1 Access, interpret and apply compliance documentation and ensure the work activity is compliant

1.2 Obtain, read, confirm and apply work instructions

1.3 Identify, manage and report all potential hazards

1.4 Resolve coordination requirements with others at the site prior to commencing and during work activities

1.5 Prepare tubular for well use/rig move, including placed in tiers (pipe bins)

1.6 Measure, label and record tubulars

1.7 Operate load shifting equipment correctly

1.8 Select and use/wear protective clothing and equipment

2. Operate pneumatic and electric power tools

2.1 Use pneumatic and electric power tools

2.2 Assist crew by supplying tools to the drill floor as required

3. Assist with loading, unloading and moving

3.1 Use approved safety approach

3.2 Use correct lifting techniques and use load shifting equipment

4. Assist with making up fluid/air injection requirements

4.1 Comply with safety data sheet

4.2 Assist with mixing of fluids or air injection requirements

4.3 Use safety equipment correctly in event of personal contact with hazardous materials

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

1. Plan and prepare for rig lease operations

1.1 Access, interpret and apply compliance documentation and ensure the work activity is compliant

1.2 Obtain, read, confirm and apply work instructions

1.3 Identify, manage and report all potential hazards

1.4 Resolve coordination requirements with others at the site prior to commencing and during work activities

1.5 Prepare tubular for well use/rig move, including placed in tiers (pipe bins)

1.6 Measure, label and record tubulars

1.7 Operate load shifting equipment correctly

1.8 Select and use/wear protective clothing and equipment

2. Operate pneumatic and electric power tools

2.1 Use pneumatic and electric power tools

2.2 Assist crew by supplying tools to the drill floor as required

3. Assist with loading, unloading and moving

3.1 Use approved safety approach

3.2 Use correct lifting techniques and use load shifting equipment

4. Assist with making up fluid/air injection requirements

4.1 Comply with safety data sheet

4.2 Assist with mixing of fluids or air injection requirements

4.3 Use safety equipment correctly in event of personal contact with hazardous materials

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Access, interpret and apply compliance documentation and ensure the work activity is compliant 
Obtain, read, confirm and apply work instructions 
Identify, manage and report all potential hazards 
Resolve coordination requirements with others at the site prior to commencing and during work activities 
Prepare tubular for well use/rig move, including placed in tiers (pipe bins) 
Measure, label and record tubulars 
Operate load shifting equipment correctly 
Select and use/wear protective clothing and equipment 
Use pneumatic and electric power tools 
Assist crew by supplying tools to the drill floor as required 
Use approved safety approach 
Use correct lifting techniques and use load shifting equipment 
Comply with safety data sheet 
Assist with mixing of fluids or air injection requirements 
Use safety equipment correctly in event of personal contact with hazardous materials 

Forms

Assessment Cover Sheet

RIIWSV202D - Carry out well servicing rig lease operations
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

RIIWSV202D - Carry out well servicing rig lease operations

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: