|
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. |
Relevant government regulations, licensing and other compliance requirements may include: | biodiversity and genetically modified organisms biosecurity, translocation and quarantine business or workplace operations, policies and practices environmental hazard identification, risk assessment and control food safety/Hazard Analysis Critical Control Point (HACCP), hygiene and temperature control along chain of custody, and Australian Quarantine Inspection Service (AQIS) Export Control (Fish) orders health and welfare of aquatic animals Indigenous land rights and cultural activities, including fishing by traditional methods maritime operations, safety at sea and pollution control OHS hazard identification, risk assessment and control. |
OHS guidelines may include: | appropriate workplace provision of first aid kits and fire extinguishers codes of practice, regulations and/or guidance notes which may apply in a jurisdiction or industry sector enterprise-specific OHS procedures, policies or standards hazard and risk assessment of workplace, maintenance activities and control measures induction or training of staff, contractors and visitors in relevant OHS procedures and/or requirements to allow them to carry out their duties in a safe manner OHS training register safe lifting, carrying and handling techniques, including manual handling, and the handling and storage of hazardous substances safe systems and procedures for outdoor work, including protection from solar radiation, fall protection, confined space entry and the protection of people in the workplace systems and procedures for the safe maintenance of property, machinery and equipment, including hydraulics and exposed moving parts the appropriate use, maintenance and storage of PPE. |
ESD principles may include: | applying animal welfare ethics and procedures control of effluents, chemical residues, contaminants, wastes and pollution control of weeds, pests, predators and diseases, and stock health maintenance improving energy efficiency increasing use of renewable, recyclable and recoverable resources minimising noise, dust, light or odour emissions preventing live cultured or held organisms from escaping into environment reducing emissions of greenhouse gases reducing energy use reducing use of non-renewable resources undertaking environmental hazard identification, risk assessment and control undertaking facility quarantine, biosecurity and translocation of livestock and genetic material using and recycling of water, and maintaining water quality. |
Food safety and hygiene regulations and procedures may include: | Australian Shellfish Sanitation program equipment design, use, cleaning and maintenance exporting requirements, including AQIS Export Control (Fish) orders HACCP, food safety program, and other risk minimisation and quality assurance systems location, construction and servicing of seafood premises people, product and place hygiene and sanitation requirements Primary Products Standard and the Australian Seafood Standard (voluntary) product labelling, tracing and recall receipt, storage and transportation of food, including seafood and aquatic products requirements set out in Australian and New Zealand Food Authority (ANZFA) Food Standards Code and state and territory food regulations temperature and contamination control along chain of custody. |
PPE may include: | buoyancy vest or personal floatation device (PFD) hard hat or protective head covering hearing protection (e.g. ear plugs and ear muffs) non-slip and waterproof boots (gumboots) or other safety footwear personal locator beacon or Emergency Position Indicating Radio Beacon (EPIRB) protective eyewear, glasses and face mask protective outdoor clothing for tropical conditions respirator or face mask safety harness sun protection (e.g. sun hat, sunscreen and sunglasses) uniforms or overalls waterproof clothing (e.g. wet weather gear and waders). |
Instructions may include: | council and government regulations maintenance schedules manufacturer guidelines for maintenance repair logs verbal instructions. |
Basic tools/equipment may include: | cleaning rags concrete fibreglass and tools glue, primer and sandpaper oil and/or grease gun plugs or repair patches safety equipment (e.g. goggles, mask or breathing equipment) screwdrivers, spanners or socket set, stilson, hack saw and heat guns silicone or similar sealant spade, shovel, pick and crowbar thread/plumber's tape. |
Spare parts may include: | concrete fibreglass webbing, gels and hardeners fittings (e.g. joints, valves, mark boards, barrel unions and reducers) pipe lengths pipe saddles or clamps protection strips sand and gravel. |
Water supply and disposal system or structure may include: | channels, canals or trenches (e.g. earthen, concrete or plastic-lined) depth gauges float switches and solenoids flow control devices (e.g. taps, valves, float valves, monks, dykes, weirs and gates) flow meters and pressure gauges header tank hoses intake structure support screens non-return mechanisms pipes (e.g. metal, PVC, rubber, concrete or polyethylene/polypropylene), pressure or sewage rating pumps, bores and windmills roaded banks sediment dams settlement tanks sieves, filters, outlet screens or other mechanical, chemical or biological treatment structures siphons, including reducing diameter pipes spill ways/outlets sprays storage dams or reservoirs sumps. |
Mechanical equipment may include: | aerator filtration plant, including mechanical, chemical and biological gravity flow system ozonators pumps: airlift axial centrifugal current/tide activated dosing fire hydraulic ram magnetic drive piston pressure regenerative turbine screw or helical drive self-priming or non-priming sludge or surge submersible venturi windmills pumps powered by: battery cable diesel or petrol electricity (single or 3-phase) hydraulics solar wind ultraviolet (UV) filter. |
Impediments may include: | dead plant or animal matter fouling species plant or weed growth sediment and debris. |
Worn or damaged parts or areas may include: | chemical and biological filters depth gauges fittings, such as joints, valves and boards flow control devices (e.g. taps, valves, float valves, monks, dykes, weirs and gates) pipes pumps and mechanical components sides or bottoms of earthen, concrete, fibreglass or plastic-lined supply and disposal systems or structures treatment structures and mechanical components (e.g. sieves, filters and aerators). |
Repair techniques may include: | applying plugs or patches fibreglassing fitting joints, valves and boards laying and joining pipes (with or without glue or other fixatives) metal welding mixing, pouring and curing concrete plastic welding working and shaping earth. |
Waste may include: | dead plant or animal matter sludge structure and site debris worn and damaged parts or tools. |
Relevant maintenance and repair data may include: | critical flow rates inventory of spare parts general observations on condition of systems result of maintenance and repair. |