Assessor Resource

SIFCBCR011
Manufacture vault lids

Assessment tool

Version 1.0
Issue Date: March 2024


This unit describes the performance outcomes and knowledge required to manufacture concrete vault lids using moulds. It applies to cemetery and crematorium staff involved in burial works. It involves working under supervision and according to work health and safety, relevant legislation and workplace policies and procedures.

No licensing, legislative or certification requirements apply to this unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)



Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Plan and prepare vault lid production work.

1.1 Liaise with manager to identify and confirm work requirements.

1.2 Identify, prepare and use personal protective equipment.

1.3 Select and assemble tools and equipment according to work requirements.

1.4 Inspect tools and equipment for serviceability and report faults.

1.5 Identify and assemble required mould parts according to work requirements.

1.6 Check mould parts for cleanliness and leakage.

1.7 Clean dirty mould parts and report damaged moulds to manager as required.

1.8 Establish mould dimensions against specifications or drawings.

1.9 Prepare concrete for use in mould.

2. Complete work tasks.

2.1 Place reinforcement and fittings in mould as required.

2.2 Pour concrete into mould to create vault lid.

2.3 Vibrate and finish lid according to manufacturer guidelines.

2.4 Store lid according to work requirements.

3. Clean work area.

3.1 Disassemble, clean and store mould.

3.2 Clean, maintain and store tools and equipment.

3.3 Clean work site according to workplace requirements.

3.4 Complete lid manufacture documentation.

Evidence of the ability to:

select, prepare, use, maintain and clean the required tools and equipment according to manager instructions, workplace policies and procedures, and manufacturer guidelines

produce vault lids safety and efficiently according to work specifications.

Evidence of performance of manufacturing vault lids on two or more occasions is required to demonstrate consistency of performance and ability to respond to different situations.

Demonstrated knowledge of:

principles of concrete construction in relation to manufacturing vault lids

use and maintenance of personal protective equipment

tools and equipment used in relation to manufacturing vault lids, and their associated uses

operating and maintenance requirements of relevant hand tools and equipment

materials required for concreting process

material handling techniques in relation to manufacturing vaults

federal, state or territory, and local government legislation and regulations relating to work health and safety/occupational health and safety and the manufacture of vault lids

workplace policies and procedures regarding concrete construction

environmental impacts in relation to burial works and minimal impact practices to reduce these, especially those that relate to resource, water and energy use

environmentally sound disposal methods for all types of waste and in particular for hazardous substances.

Skills must be demonstrated in the workplace or in a simulated environment that is as industry realistic as possible. In a simulated environment, it is essential that assessment is conducted:

using suitable facilities, equipment and resources, including:

an environment where a range of vault lids using moulds are manufactured

personal protective equipment and concreting tools and equipment used in the manufacture of vault lids

vault lid specifications

under industry conditions where there is:

integration of tasks with possible interruptions to work typical of the job role

speed and timing requirements that reflect commercial operating conditions

interaction with manager

Assessors must satisfy the NVR/AQTF mandatory competency requirements for assessors.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Plan and prepare vault lid production work.

1.1 Liaise with manager to identify and confirm work requirements.

1.2 Identify, prepare and use personal protective equipment.

1.3 Select and assemble tools and equipment according to work requirements.

1.4 Inspect tools and equipment for serviceability and report faults.

1.5 Identify and assemble required mould parts according to work requirements.

1.6 Check mould parts for cleanliness and leakage.

1.7 Clean dirty mould parts and report damaged moulds to manager as required.

1.8 Establish mould dimensions against specifications or drawings.

1.9 Prepare concrete for use in mould.

2. Complete work tasks.

2.1 Place reinforcement and fittings in mould as required.

2.2 Pour concrete into mould to create vault lid.

2.3 Vibrate and finish lid according to manufacturer guidelines.

2.4 Store lid according to work requirements.

3. Clean work area.

3.1 Disassemble, clean and store mould.

3.2 Clean, maintain and store tools and equipment.

3.3 Clean work site according to workplace requirements.

3.4 Complete lid manufacture documentation.

Evidence of the ability to:

select, prepare, use, maintain and clean the required tools and equipment according to manager instructions, workplace policies and procedures, and manufacturer guidelines

produce vault lids safety and efficiently according to work specifications.

Evidence of performance of manufacturing vault lids on two or more occasions is required to demonstrate consistency of performance and ability to respond to different situations.

Demonstrated knowledge of:

principles of concrete construction in relation to manufacturing vault lids

use and maintenance of personal protective equipment

tools and equipment used in relation to manufacturing vault lids, and their associated uses

operating and maintenance requirements of relevant hand tools and equipment

materials required for concreting process

material handling techniques in relation to manufacturing vaults

federal, state or territory, and local government legislation and regulations relating to work health and safety/occupational health and safety and the manufacture of vault lids

workplace policies and procedures regarding concrete construction

environmental impacts in relation to burial works and minimal impact practices to reduce these, especially those that relate to resource, water and energy use

environmentally sound disposal methods for all types of waste and in particular for hazardous substances.

Skills must be demonstrated in the workplace or in a simulated environment that is as industry realistic as possible. In a simulated environment, it is essential that assessment is conducted:

using suitable facilities, equipment and resources, including:

an environment where a range of vault lids using moulds are manufactured

personal protective equipment and concreting tools and equipment used in the manufacture of vault lids

vault lid specifications

under industry conditions where there is:

integration of tasks with possible interruptions to work typical of the job role

speed and timing requirements that reflect commercial operating conditions

interaction with manager

Assessors must satisfy the NVR/AQTF mandatory competency requirements for assessors.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Liaise with manager to identify and confirm work requirements. 
Identify, prepare and use personal protective equipment. 
Select and assemble tools and equipment according to work requirements. 
Inspect tools and equipment for serviceability and report faults. 
Identify and assemble required mould parts according to work requirements. 
Check mould parts for cleanliness and leakage. 
Clean dirty mould parts and report damaged moulds to manager as required. 
Establish mould dimensions against specifications or drawings. 
Prepare concrete for use in mould. 
Place reinforcement and fittings in mould as required. 
Pour concrete into mould to create vault lid. 
Vibrate and finish lid according to manufacturer guidelines. 
Store lid according to work requirements. 
Disassemble, clean and store mould. 
Clean, maintain and store tools and equipment. 
Clean work site according to workplace requirements. 
Complete lid manufacture documentation. 
Liaise with manager to identify and confirm work requirements. 
Identify, prepare and use personal protective equipment. 
Select and assemble tools and equipment according to work requirements. 
Inspect tools and equipment for serviceability and report faults. 
Identify and assemble required mould parts according to work requirements. 
Check mould parts for cleanliness and leakage. 
Clean dirty mould parts and report damaged moulds to manager as required. 
Establish mould dimensions against specifications or drawings. 
Prepare concrete for use in mould. 
Place reinforcement and fittings in mould as required. 
Pour concrete into mould to create vault lid. 
Vibrate and finish lid according to manufacturer guidelines. 
Store lid according to work requirements. 
Disassemble, clean and store mould. 
Clean, maintain and store tools and equipment. 
Clean work site according to workplace requirements. 
Complete lid manufacture documentation. 

Forms

Assessment Cover Sheet

SIFCBCR011 - Manufacture vault lids
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

SIFCBCR011 - Manufacture vault lids

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: