TDMMR4707B USE AND CARE FOR HAND AND POWER TOOLS ON A VESSEL |
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, , the Range Statement and the Assessment Guidelines for this Training Package. |
1 | Critical aspects of evidence required to demonstrate competency in this unit | Assessment must confirm appropriate knowledge and skills to:
|
a
| Select appropriate hand and power tools to complete assigned tasks
|
b
| Use hand and power tools as per procedures and manufacturer's instructions
|
c
| Care for hand and power tools in accordance with established procedures and manufacturer's instructions
|
d
| Ensure the exercise of all required safety, environmental and hazard control precautions and procedures when using hand and power tools to complete assigned tasks
|
e
| Take appropriate action if a hand or power tool is found to be defective or worn |
2 | Evidence required for demonstration of consistent performance | a
| Performance is demonstrated consistently over a period of time and in a suitable range of contexts
|
b
| Consistently applies underpinning knowledge and skills when:
|
| 1
| selecting appropriate hand and power tools to complete assigned tasks
|
| 2
| using and caring for hand and power tools
|
| 3
| ensuring the exercise of all required safety, environmental and hazard control precautions and procedures when using hand and power tools in accordance to complete assigned tasks
|
| 4
| taking appropriate action where a hand or power tool has been found to be defective or worn
|
c
| Shows evidence of application of relevant workplace procedures, including:
|
| 1
| ISM Code and associated vessel's safety management system and procedures
|
| 2
| OH&S regulations and hazard prevention policies and procedures
|
| 3
| tool manufacturer's instructions
|
| 4
| established job procedures and work instructions
|
| 5
| following housekeeping processes
|
d
| Action is taken promptly to report incidents and problems involving the use of hand and power tools
|
e
| Work is completed systematically with required attention to detail
|
f
| Recognises and adapts appropriately to cultural differences in the workplace, including modes of behaviour and interactions between crew and others
|
(continued) TDMMR4707B USE AND CARE FOR HAND AND POWER TOOLS ON A VESSEL |
3 | Context of assessment | a
| Assessment of competency must comply with the assessment requirements of the relevant maritime regulations
|
b
| Assessment of this unit must be undertaken within relevant marine authority approved and audited arrangements by a registered training organisation:
|
| 1 | As a minimum, assessment of knowledge must be conducted through appropriate written/oral examinations, and
|
| 2
| Appropriate practical assessment must occur:
|
| | i
| at the registered training organisation; and/or
|
| | ii
| on an appropriate working or training vessel |
| |
4 | Specificresourcesrequired for assessment | Access is required to opportunities to:
|
a
| demonstrate the ability to the use and care of hand or power tools required for work tasks that may be carried out by an integrated rating on board a vessel through appropriate practical exercises and simulated situations; and/or
|
b
| use and care for hand or power tools required for work tasks that may be carried out by an integrated rating on an operational commercial or training vessel |