Assessor Resource

TLIA2050
Lash and unlash cargo and containers

Assessment tool

Version 1.0
Issue Date: April 2024


This unit involves the skills and knowledge required to lash and unlash cargo and containers in compliance with relevant regulations and workplace requirements in the stevedoring, transport, distribution and allied industries.

It includes preparing to lash and unlash cargo and containers, implementing the container lashing plan, and completing lashing and unlashing operations.

Work is performed under some supervision generally within a team environment.

No licensing, legislative or certification requirements apply to this unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare to lash and unlash cargo and containers

1.1

Work area and safety zones are prepared and maintained in accordance with national standards, safety codes and site operating procedures

1.2

Work area hazards are identified and corrective action is taken prior to commencing lashing and unlashing operations

1.3

Relevant information and documentation are identified and accessed

1.4

Appropriate personal protective equipment, lashing equipment and fittings are selected and used

1.5

Work cage and/or working at height (WAH) requirements are identified and appropriate WAH equipment is selected

1.6

Marks, numbers and/or codes are used to identify cargo and containers

1.7

Cargo is sorted and stacked in correct location in accordance with national standards, safety codes and site operating procedures

1.8

Containers are stowed in accordance with stowage plan, and reefer containers are identified and connected in accordance with ship procedures, national standards and safety codes

1.9

Damaged cargo and containers are identified, reported and dealt with in accordance with site operating procedures

1.10

Potential unsafe work practices and/or equipment are reported to appropriate personnel

2

Implement cargo and container lashing and unlashing procedures

2.1

Cargo or container lashing and unlashing plan is accessed and read, and potential issues are clarified with supervisor

2.2

Procedures for managing and controlling hazardous situations when carrying out work activities are implemented

2.3

Safety procedures and safety zones are implemented when working with mobile equipment and cranes in accordance with national standards, safety codes and site operating procedures

2.4

Work is conducted in accordance with industry standards, statutory requirements, safety codes, site operating requirements, cargo and container requirements

2.5

Work cage and/or WAH is completed in accordance with national standards, safety codes and site procedures

2.6

Appropriate and effective communication is maintained in work area

2.7

Cargo and container are lashed and unlashed in accordance with site procedures, and cargo and containers are lashed and unlashed in accordance with lashing and unlashing plan

2.8

Correct manual handling techniques are used when lashing and unlashing cargo and containers

2.9

Identified problems, faults and malfunctions are promptly reported and/or rectified in accordance with regulatory requirements and workplace procedures

2.10

Contingency plans are implemented as required

3

Complete cargo and container lashing and unlashing operations

3.1

Cargo and container are covered and uncovered safely ensuring appropriate covering and lashing, no injury to persons in work area or damage to cargo, container and equipment

3.2

Lashing equipment and tools are cleared from work area and placed in designated storage areas

3.3

All safety equipment and radios are returned to designated area

3.4

Relevant documentation is completed and filed in accordance with site operating procedures

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria on at least one occasion and include:

applying appropriate fatigue management techniques as required

applying precautions and required action to minimise, control or eliminate identified hazards

being aware of own ability and limits to rectify irregularities or faults

communicating effectively with others

fastening tensioners securely

identifying and correctly using relevant equipment

identifying cargo, containers and goods, Australian Dangerous Goods (ADG) Code and International Maritime Dangerous Goods (IMDG) Code markings and emergency information panels

identifying lashing points

maintaining tight stow of cargo

modifying activities depending on operational contingencies, risk situations and environments

monitoring and prioritising work activities in terms of planned schedule

operating and adapting to differences in cargo and container lashing and unlashing equipment in accordance with standard operating procedures

reading, interpreting and following relevant instructions, procedures, information and signs

receiving, acknowledging and sending messages with available communications equipment

releasing fittings, and disconnecting and removing them from cargo

securing cargo to lashing points ensuring correct spread of lashings and that lashings are secured, attached and tensioned

selecting and using required:

personal protective equipment conforming to industry and work health and safety (WHS)/occupational health and safety (OHS) standards

work cage and/or working at height (WAH) personal protective equipment conforming to industry and WHS/OHS standards

using appropriate fittings and lashing equipment for each lashing point

working systematically with required attention to detail and without injury to self or others, or damage to goods or equipment.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and include knowledge of:

basic fatigue management techniques

cargo and container marking and numbering systems

operation of work systems, equipment, management and site operating systems for lashing and unlashing cargo and containers

problems that may occur and appropriate action that can be taken to resolve them

relevant Australian and international standards, codes of practice and regulations required to perform the job requirements relating to this unit, including:

ADG Code

Australian and international explosives Codes

IMDG Code

International Air Transport Association (IATA) Dangerous Goods Regulations (DGR)

Marine Orders

relevant WHS/OHS and environmental procedures and regulations

relevant workplace procedures and policies.

As a minimum, assessors must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

As a minimum, assessment must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

Assessment must occur in workplace operational situations where lashing and unlashing cargo and containers can be demonstrated. Where this is not appropriate, assessment must occur in simulated workplace operational situations that replicate workplace conditions.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment include access to:

a range of relevant exercises, case studies and/or simulations

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals, including:

ADG Code

Australian and international explosives Codes

IMDG Code

IATA DGR

Marine Orders

personal protective clothing and equipment, including:

fall arrest safety harness

gloves

high visibility clothing

protective clothing

safety glasses

safety headwear and footwear

relevant materials, tools and equipment currently used in industry, including:

chains

chocks

fibre ropes

lashing bars

racks

twistlocks

turnbuckles

webbing straps and ratchets

wire ropes.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare to lash and unlash cargo and containers

1.1

Work area and safety zones are prepared and maintained in accordance with national standards, safety codes and site operating procedures

1.2

Work area hazards are identified and corrective action is taken prior to commencing lashing and unlashing operations

1.3

Relevant information and documentation are identified and accessed

1.4

Appropriate personal protective equipment, lashing equipment and fittings are selected and used

1.5

Work cage and/or working at height (WAH) requirements are identified and appropriate WAH equipment is selected

1.6

Marks, numbers and/or codes are used to identify cargo and containers

1.7

Cargo is sorted and stacked in correct location in accordance with national standards, safety codes and site operating procedures

1.8

Containers are stowed in accordance with stowage plan, and reefer containers are identified and connected in accordance with ship procedures, national standards and safety codes

1.9

Damaged cargo and containers are identified, reported and dealt with in accordance with site operating procedures

1.10

Potential unsafe work practices and/or equipment are reported to appropriate personnel

2

Implement cargo and container lashing and unlashing procedures

2.1

Cargo or container lashing and unlashing plan is accessed and read, and potential issues are clarified with supervisor

2.2

Procedures for managing and controlling hazardous situations when carrying out work activities are implemented

2.3

Safety procedures and safety zones are implemented when working with mobile equipment and cranes in accordance with national standards, safety codes and site operating procedures

2.4

Work is conducted in accordance with industry standards, statutory requirements, safety codes, site operating requirements, cargo and container requirements

2.5

Work cage and/or WAH is completed in accordance with national standards, safety codes and site procedures

2.6

Appropriate and effective communication is maintained in work area

2.7

Cargo and container are lashed and unlashed in accordance with site procedures, and cargo and containers are lashed and unlashed in accordance with lashing and unlashing plan

2.8

Correct manual handling techniques are used when lashing and unlashing cargo and containers

2.9

Identified problems, faults and malfunctions are promptly reported and/or rectified in accordance with regulatory requirements and workplace procedures

2.10

Contingency plans are implemented as required

3

Complete cargo and container lashing and unlashing operations

3.1

Cargo and container are covered and uncovered safely ensuring appropriate covering and lashing, no injury to persons in work area or damage to cargo, container and equipment

3.2

Lashing equipment and tools are cleared from work area and placed in designated storage areas

3.3

All safety equipment and radios are returned to designated area

3.4

Relevant documentation is completed and filed in accordance with site operating procedures

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions can be found in the Companion Volume Implementation Guide.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria on at least one occasion and include:

applying appropriate fatigue management techniques as required

applying precautions and required action to minimise, control or eliminate identified hazards

being aware of own ability and limits to rectify irregularities or faults

communicating effectively with others

fastening tensioners securely

identifying and correctly using relevant equipment

identifying cargo, containers and goods, Australian Dangerous Goods (ADG) Code and International Maritime Dangerous Goods (IMDG) Code markings and emergency information panels

identifying lashing points

maintaining tight stow of cargo

modifying activities depending on operational contingencies, risk situations and environments

monitoring and prioritising work activities in terms of planned schedule

operating and adapting to differences in cargo and container lashing and unlashing equipment in accordance with standard operating procedures

reading, interpreting and following relevant instructions, procedures, information and signs

receiving, acknowledging and sending messages with available communications equipment

releasing fittings, and disconnecting and removing them from cargo

securing cargo to lashing points ensuring correct spread of lashings and that lashings are secured, attached and tensioned

selecting and using required:

personal protective equipment conforming to industry and work health and safety (WHS)/occupational health and safety (OHS) standards

work cage and/or working at height (WAH) personal protective equipment conforming to industry and WHS/OHS standards

using appropriate fittings and lashing equipment for each lashing point

working systematically with required attention to detail and without injury to self or others, or damage to goods or equipment.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and include knowledge of:

basic fatigue management techniques

cargo and container marking and numbering systems

operation of work systems, equipment, management and site operating systems for lashing and unlashing cargo and containers

problems that may occur and appropriate action that can be taken to resolve them

relevant Australian and international standards, codes of practice and regulations required to perform the job requirements relating to this unit, including:

ADG Code

Australian and international explosives Codes

IMDG Code

International Air Transport Association (IATA) Dangerous Goods Regulations (DGR)

Marine Orders

relevant WHS/OHS and environmental procedures and regulations

relevant workplace procedures and policies.

As a minimum, assessors must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

As a minimum, assessment must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

Assessment must occur in workplace operational situations where lashing and unlashing cargo and containers can be demonstrated. Where this is not appropriate, assessment must occur in simulated workplace operational situations that replicate workplace conditions.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment include access to:

a range of relevant exercises, case studies and/or simulations

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals, including:

ADG Code

Australian and international explosives Codes

IMDG Code

IATA DGR

Marine Orders

personal protective clothing and equipment, including:

fall arrest safety harness

gloves

high visibility clothing

protective clothing

safety glasses

safety headwear and footwear

relevant materials, tools and equipment currently used in industry, including:

chains

chocks

fibre ropes

lashing bars

racks

twistlocks

turnbuckles

webbing straps and ratchets

wire ropes.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work area and safety zones are prepared and maintained in accordance with national standards, safety codes and site operating procedures 
Work area hazards are identified and corrective action is taken prior to commencing lashing and unlashing operations 
Relevant information and documentation are identified and accessed 
Appropriate personal protective equipment, lashing equipment and fittings are selected and used 
Work cage and/or working at height (WAH) requirements are identified and appropriate WAH equipment is selected 
Marks, numbers and/or codes are used to identify cargo and containers 
Cargo is sorted and stacked in correct location in accordance with national standards, safety codes and site operating procedures 
Containers are stowed in accordance with stowage plan, and reefer containers are identified and connected in accordance with ship procedures, national standards and safety codes 
Damaged cargo and containers are identified, reported and dealt with in accordance with site operating procedures 
Potential unsafe work practices and/or equipment are reported to appropriate personnel 
Cargo or container lashing and unlashing plan is accessed and read, and potential issues are clarified with supervisor 
Procedures for managing and controlling hazardous situations when carrying out work activities are implemented 
Safety procedures and safety zones are implemented when working with mobile equipment and cranes in accordance with national standards, safety codes and site operating procedures 
Work is conducted in accordance with industry standards, statutory requirements, safety codes, site operating requirements, cargo and container requirements 
Work cage and/or WAH is completed in accordance with national standards, safety codes and site procedures 
Appropriate and effective communication is maintained in work area 
Cargo and container are lashed and unlashed in accordance with site procedures, and cargo and containers are lashed and unlashed in accordance with lashing and unlashing plan 
Correct manual handling techniques are used when lashing and unlashing cargo and containers 
Identified problems, faults and malfunctions are promptly reported and/or rectified in accordance with regulatory requirements and workplace procedures 
Contingency plans are implemented as required 
Cargo and container are covered and uncovered safely ensuring appropriate covering and lashing, no injury to persons in work area or damage to cargo, container and equipment 
Lashing equipment and tools are cleared from work area and placed in designated storage areas 
All safety equipment and radios are returned to designated area 
Relevant documentation is completed and filed in accordance with site operating procedures 

Forms

Assessment Cover Sheet

TLIA2050 - Lash and unlash cargo and containers
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

TLIA2050 - Lash and unlash cargo and containers

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: