Assessor Resource

TLIB3094B
Check and repair track geometry

Assessment tool

Version 1.0
Issue Date: May 2024


Work is performed under minimal supervision, generally in a team environment. It involves the application of routine operational principles and procedures to the checking and repair of track geometry as part of workplace activities across a variety of operational contexts within the Australian rail system.

This unit involves the skills and knowledge required to check and repair track geometry in accordance with safeworking and regulatory requirements and workplace procedures. It includes determining the job requirements, restoring track geometry, checking track compliance after work, and completing required documentation.

Licensing or certification requirements are not applicable to this unit. Persons achieving competence in this unit will need to fulfil legislated rail safety requirements, including acts and regulations from each applicable state and territory, together with any nationally approved compliance codes and/or guidelines.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Prerequisites

Not Applicable

Employability Skills

This unit contains employability skills.



Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying:

the underpinning knowledge and skills

relevant legislation and workplace procedures

other relevant aspects of the range statement

Assessment must include exercises that demonstrate competent performance of the following in a range of situations:

identifying a number of different faults and deficiencies

determining appropriate repair methods for identified faults

using appropriate lifting and lining methods and equipment to restore running surface to required geometry

after work is completed, certifying track to operational standards

completing documentation in accordance with standards and workplace procedures

Context of and specific resources for assessment

Performance is demonstrated consistently over a period of time and in a suitable range of contexts

Resources for assessment include:

a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or

access to an appropriate range of relevant operational situations in the workplace

In both real and simulated environments, access is required to:

relevant and appropriate materials and equipment, and

applicable documentation, including workplace procedures, regulations, codes of practice and operation manuals

Method of assessment

Assessment of this unit must be undertaken by a registered training organisation

As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests

Practical assessment must occur:

through activities in an appropriately simulated environment at the registered training organisation, and/or

in an appropriate range of situations in the workplace

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

REQUIRED KNOWLEDGE AND SKILLS

This describes the essential knowledge and skills and their level required for this unit.

Required knowledge:

Relevant safety, OH&S and environmental procedures and regulations

Workplace procedures for checking and repairing track geometry

Problems that may occur when carrying out work activities to check and repair track geometry, and action that can be taken to report or resolve them

Hazards that may exist when checking and repairing track geometry, and ways of controlling the risks involved

Relevant Australian standards, technical specifications and manuals

Documentation and/or work authorisation and work completion processes and procedures

Fault detection techniques

Track geometry maintenance methods and techniques

Defects that can affect safe operation, including:

Defects in track structure, including sleeper condition, spacing, fastening condition, rail joint condition, ballast profile and packing

Clearance defects

Defects in earthworks

Track stability and the work requirements for differing weather conditions

Track geometry acceptance standards

Track certification requirements

Relevant work recording procedures

Procedures to be followed in the event of an emergency

Details of relevant local authority procedures

Required skills:

Communicate effectively with others when carrying out work activities to check and repair track geometry

Read and interpret instructions, procedures, information, plans, drawings and specifications relevant to work activities to check and repair track geometry

Interpret and follow operational instructions and prioritise work

Complete documentation related to work activities to check and repair track geometry

Record and report results of track work in required format

Operate electronic communication equipment to required protocol

Report and rectify within limits of own role identified problems when carrying out work activities in accordance with regulatory requirements and workplace procedures

Plan and organise work, including determining work requirements and work methods

Implement contingency plans for unexpected events when carrying out work activities

Apply precautions and required action to minimise, control or eliminate potential hazards during work activities

Monitor work activities in terms of planned schedule

Modify activities depending on differing operational contingencies, risk situations and environments

Work systematically with required attention to detail without injury to self or others, or damage to goods or equipment

Adapt to differences in equipment in accordance with standard operating procedures

Identify, select and use tools and equipment required in work activities to check and repair track geometry

Select and use required personal protective equipment (PPE)

Identify track geometry defects

Select and use appropriate lifting and lining methods and equipment to correct geometry defects

Use appropriate measurement methods to assess and correct geometry defects

Identify defects affecting safe operation, including:

defects in track structure, including sleeper condition, spacing, fastening condition, rail joint condition, ballast profile and packing

structure and track centre clearance defects

defects in earthworks

Assess defects against acceptance standards and apply appropriate restrictions

RANGE STATEMENT

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.

Ballasted track geometry to be checked and repaired may include:

plain track

turnouts and special track work

Track geometry repair methods may include:

manual fettling with hand tools and light equipment

manual fettling with small on-track or off-track plant (spot tampers, etc.)

resurfacing with large on-track plant

Manual fettling includes:

any operation where measurement of geometry (before and after) is conducted by hand-held equipment and lifts and pulls are manually calculated

Resurfacing operations include:

any operation where measurements and calculations of lifts and pulls are carried out automatically or semi-automatically by resurfacing plant

Equipment may include:

mechanical lifting and handling devices

basic hand tools and small plant

track jacks

on-track machines, such as tampers, liners or regulators

manual and electronic measuring equipment

Certifying track after work includes:

confirming safe clearances of any structure erected adjacent to or over the track

Reinstatement of service may include:

unrestricted operation of rail traffic

operation under speed restriction

restricted clearance operation

operation under tonnage restrictions

Liaison may include:

internal or external personnel from other work areas

Communication equipment systems may include:

two-way radios

telephones, including mobile phones

agreed audible or hand signals

Depending on the type of organisation concerned and the local terminology used, workplace procedures may include:

company procedures

enterprise procedures

organisational procedures

established procedures

Safety and personal protective equipment may include:

high visibility clothing

hearing protection

gloves

sunscreen

sunglasses

dust mask

safety glasses

insect repellent

safety headwear

safety footwear

portable radios and mobile phones

hand lamps

flags

safety devices

Information and documents may include:

maintenance notices, records and requests

local instructions

local authority regulations and procedures

work orders

technical instructions

manufacturer or workplace equipment operation manuals

operational instructions, policies and workplace procedures

two-way radio or mobile telephone operation procedures

emergency procedures manual

quality assurance (QA) plans, data and document control

conditions of service, legislation and industrial agreements, including workplace agreements and awards

Applicable regulations and legislation may include:

legislated rail safety requirements, including acts and regulations from each applicable state or territory, together with any nationally approved compliance codes and guidelines

relevant state or territory regulations, codes of practice and safeworking system requirements

relevant Australian standards (AS) and related requirements, including AS 4292

relevant state or territory legislation relating to:

environmental protection

OH&S

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Faults and deficiencies in track geometry are identified, and work required for restoration of track to required standard is determined 
Appropriate repair methods are identified to enable repairs to be effected 
Job requirements and resources are determined according to workplace procedures and scope of work 
Survey data are used where required to establish correct geometry 
Appropriate lifting and lining methods and equipment are used to lift and line track to restore running surface to required geometry in accordance with workplace standards and procedures 
Track geometry is checked for compliance with acceptance standards 
Vertical and horizontal structural and overhead clearances are checked against required standards to allow safe passage of trains 
Track structure where work has been undertaken is checked for compliance with standards required to enable reinstatement of service 
Appropriate operating conditions are applied in accordance with workplace procedures 
Documentation on work undertaken is completed in accordance with workplace requirements 

Forms

Assessment Cover Sheet

TLIB3094B - Check and repair track geometry
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

TLIB3094B - Check and repair track geometry

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: